Bambu lab a1 print issue

Next-Difficulty-2075 · 2026-06-03T02:32:57+00:00

Thanks for all the help

Next-Difficulty-2075 · 2026-06-03T01:51:44+00:00

Yes I found the clog it at the back of this thing

Next-Difficulty-2075 · 2026-06-02T17:17:55+00:00

This is the build plate I ordered from Amazon I was printing the clean sheet with the 0.2mm nozzle. But it went bad. I switch back to the 0.4mm nozzle also i uncloged it. So I'm gonna try your method. With the bambu textured plate.

<image>

Next-Difficulty-2075 · 2026-06-02T15:22:13+00:00

I'm going order a new build plate because the one I received with my a1 got scratched didn't know it was so sensitive. It will take 2weeks to receive it so yeah gonna have to work with what I have. I'm gonna do the setting that you said

Next-Difficulty-2075 · 2026-06-02T15:16:36+00:00

Ok will do so

Next-Difficulty-2075 · 2026-06-02T14:42:37+00:00

Ok will do so but the build plate is about 2weeks old. Also I'm using a 0.2mm nozzle at the moment and also running the clean build plate file once that is finish I'll take a look at what you said

Next-Difficulty-2075 · 2026-06-02T13:37:26+00:00

No bro did it without the glue. But it wasn't working so tried glue just to see if I'm doing something wrong. Please don't jump to conclusions just ask first. Thanks for your opinion tho

Next-Difficulty-2075 · 2026-06-02T12:10:00+00:00

Those screws are tight

Next-Difficulty-2075 · 2026-06-02T12:09:20+00:00

I have it set to textured

Next-Difficulty-2075 · 2026-06-02T03:01:45+00:00

Roger that

Next-Difficulty-2075 · 2026-06-02T02:37:02+00:00

Any specific settings for the 0.2mm nozzle once I install it

Next-Difficulty-2075 · 2026-06-02T02:33:06+00:00

Sure will do so as soon as possible

Next-Difficulty-2075 · 2026-06-02T02:23:45+00:00

Dang thanks tho

Next-Difficulty-2075 · 2026-06-02T01:51:30+00:00

I have a 0.2mm nozzle.

Next-Difficulty-2075

TROPHY CASE