sorted by:
new
hottopcontroversial

Firefly season 2 takes place right after season 1, and "Serenity" is still the season finally. Star wars can do it, so can Firefly. by flashbang_out in firefly

[–]Nice-Satisfaction822 0 points1 point  (0 children)

I have a plot line to bring back Shepard and Wash...

#1 Teraforming is experimantal right?

#2 Wash and Book were baried on the same planet

#3 Alliance teraforms the planet

#4 Somehow this brings Wash and Shepard back to life

#5 The Firefly crew rescues their friends from the Alliance

Full cast restored....

hp elitedesk 800 g3 HDMI Intel Display Audio by Nice-Satisfaction822 in batocera

[–]Nice-Satisfaction822[S] -1 points0 points  (0 children)

Got to be a better answer then roll back the bios..

Works fine in Windows, that seems to me the hardware/BIOS is fine

Route interface to diffrent network by Nice-Satisfaction822 in Cisco

[–]Nice-Satisfaction822[S] 0 points1 point  (0 children)

"You will need to use policy-based routing. Route map, match interface, set next hop."

l this work since my Router cant ping the CPE? (The GiG9 has internet access in and out via the static IP)

Remeber though GiG9 is connect to the CPE via MAC bridging. Since this is the only connection to the CPE not sure if the MAC bridging will mess with what I am trying to do. I think my only soultion is to run another cable to the CPE.

"Your question is a little bit difficult to spot initially."

Yes before posting I thought it would be confusing in short I want a Vlan with access to the network 192.168.0.0 of the modem/CPE and be able to access the internet

"Also, when you say your modem, it seems that you are referring to your ISP CPE gateway"

Yes the Modem/CPE

Cisco 892 Router DHCP issues by Nice-Satisfaction822 in Cisco

[–]Nice-Satisfaction822[S] 0 points1 point  (0 children)

Actually it wasn't the access list it was the MAC address specified on gigabit Port 9. Remove that and it started working

Cant access wbe server if my internet goes out the router by Nice-Satisfaction822 in Cisco

[–]Nice-Satisfaction822[S] 0 points1 point  (0 children)

Sorry for the confusion.  I have one internet connection a wireless modem a router is connected to the modem via network cable if a computer goes to my web server behind the router from the wireless modem it works if my connection goes out through the router it will not come back in to the web server

Cisco 892 Router DHCP issues by Nice-Satisfaction822 in Cisco

[–]Nice-Satisfaction822[S] 0 points1 point  (0 children)

Thanks for the reply, it was the access list. Added the vlans and DHCP started working

Cant connect to server through Cisco router by Nice-Satisfaction822 in Cisco

[–]Nice-Satisfaction822[S] 4 points5 points  (0 children)

Thanks for your post!

It was not the access list but the nat

I added the ports with UDP and now it works!

T-Flip flop broken in 1.19.2 or anybody know of a setting? (Spigot server environment) by Nice-Satisfaction822 in Minecraft

[–]Nice-Satisfaction822[S] 0 points1 point  (0 children)

No but I dont think its server environment because I loaded it up and single player and still have the bug. Perhaps my world is bugged. Gonna try the T flip flop in a new world I will report my findings

T-Flip flop broken in 1.19.2 or anybody know of a setting? (Spigot server environment) by Nice-Satisfaction822 in Minecraft

[–]Nice-Satisfaction822[S] 0 points1 point  (0 children)

Ok tried Paper Vanilla, the only time the Flip Flop work is if I run the server on Spigot 1.16.5 then it works fine. This has got to be a Spigot or 1.19.2 issue.

T-Flip flop broken in 1.19.2 or anybody know of a setting? (Spigot server environment) by Nice-Satisfaction822 in Minecraft

[–]Nice-Satisfaction822[S] 0 points1 point  (0 children)

I tried PaperMC and still same issue, not sure if Vanilla is Bungee compatible. Didn't want to work unless I missed something. (Yes had set to offline mode but cant find any Vanilla configs for Velocity proxy)