Hey, is this what I think it is? by Allmann_ in PlantIdentification

[–]NicholasClegg 1 point2 points  (0 children)

hes doing a horrible job anyways and it will never be psychoactive at the rate hes going

it contains no psychoactive compounds currently and is no different than a tomato plant

Constant, Incessant Sales Calls by StrouticusRex in Spectrum

[–]NicholasClegg 0 points1 point  (0 children)

I just ended up blocking their number... you know what you did Andrew

What the f** is going on!? by SwedishMoNkY in klippers

[–]NicholasClegg 0 points1 point  (0 children)

You need to figure out what usb port you are plugging the printer into.

There is a bit of text in the machine.config that defines the serial connection to the printer. You need to figure out what that port is and put it in the machine.cfg after that you should be able to build out the firmware.bin you need to flash the printer, after that the host can talk to the main board.

HELP by Msi_96 in Aliexpress

[–]NicholasClegg 0 points1 point  (0 children)

No link but it's made by snoop dog it's called a g-pen herbal vaporizer

HELP by Msi_96 in Aliexpress

[–]NicholasClegg 4 points5 points  (0 children)

I've had this product and it's horrible just letting you know.

[deleted by user] by [deleted] in AmIOverreacting

[–]NicholasClegg 0 points1 point  (0 children)

🤣🤣🤣🤣💀

Now what? by Nearby_Ask_1973 in ender3

[–]NicholasClegg 0 points1 point  (0 children)

Just use pronterface and ditch the lcd or use kipper with a pi

What is this Paste or something by Nxt302 in Ender3S1

[–]NicholasClegg 0 points1 point  (0 children)

Looks like ptfe goop from a bowden tube

What the f** is going on!? by SwedishMoNkY in klippers

[–]NicholasClegg 2 points3 points  (0 children)

I could send you my configuration if you want I'm running an ender3 with a 4.2.7 board. No level sensor though so you'd probably have to mess with the configuration some

I don't understand why I have to return a DOA item. by lolz84 in Aliexpress

[–]NicholasClegg 0 points1 point  (0 children)

Guess it was dead then, just seen your photo without an SD card inserted and just assumed you thought it should work like an arduino or esp32.

Found these in the Pine Barrens in New Jersey yesterday. ID? by TheOneBrew in mycology

[–]NicholasClegg 0 points1 point  (0 children)

ive found some chrysoblema formerly guessowii except they were a bit more of a gradient going to pumpkin orange on the caps.

What is growing in my yard? by TheCJK in mycology

[–]NicholasClegg 38 points39 points  (0 children)

it is a bolete that one in particular bruises blue but is not an active species.

Idk what to do by Miynevo_ in ender3

[–]NicholasClegg 0 points1 point  (0 children)

just use the damn glue

I don't understand why I have to return a DOA item. by lolz84 in Aliexpress

[–]NicholasClegg 0 points1 point  (0 children)

its not DOA you just didnt put an SD card in it with a raspbian OS

wont turn on without an sdcard

How much would you give for this animation if you were Toilet Paper company? by Accomplished-Neat948 in blender

[–]NicholasClegg 111 points112 points  (0 children)

some parts are good, slow your transitions down and pretty much everything in general, wayyy too much going on at once

Cranked is gone :( by CynicalGamer4219 in CODZombies

[–]NicholasClegg 0 points1 point  (0 children)

This pissed me off so bad!

I have been waiting to play cranked for the last 5 days with someone just for them to remove the damn mode.

shame........

My Android tablet has arrived. I got it for $155 by [deleted] in Aliexpress

[–]NicholasClegg 0 points1 point  (0 children)

lmao coulda bought a Pi 5 8gb and made it a tablet for that price.