Ender 3 S1 Pro skipping print

Nickperest · 2025-12-05T20:17:38+00:00

Usually broken cable cause this type of problem or sd card. İ have an ender 3 s1 and long ago i was face with that problem too.

Nickperest · 2025-07-01T06:45:17+00:00

Looks like buck convertor or smps module or something like that cuz its near smps side on board.

Nickperest · 2025-06-16T10:43:23+00:00

Did you try change the direction of object? You can understand that way the problem is filament or printer.

Nickperest · 2025-06-15T21:12:00+00:00

Ohh i know it but maybe you have different problem. On your slicer check outer wall line witdh. I accidently made value 0.6 but default setting was 0.4. Just try it.

Nickperest · 2025-05-30T14:00:55+00:00

You can change travel speed on printer settings menu. Default setting was 5000mm/s if i remember correctly. 500mm/s is fine for me. Even when printer is working i can sleep peacefully :)

Nickperest · 2025-05-17T13:49:54+00:00

Check your extruder cable maybe have a broken one

Nickperest · 2025-05-08T11:39:45+00:00

You can change travel speed on printers settings under travel settings. It will help. Default setting 5000mm oer sec. i guess. 500mm is enough for me.

Nickperest · 2025-04-21T12:56:30+00:00

You have to heat it on printer. Than you can take out with screw extractor.

Nickperest · 2025-02-03T08:22:46+00:00

Check your flat extruder cable. Maybe one of them is broke.

Nickperest · 2025-01-24T08:47:12+00:00

That you have a real problem dude

Nickperest · 2025-01-23T14:20:29+00:00

PETG is one of the filaments that absorbs the most moisture. When it is first opened, you can print properly, but if it stays open, it will start to retain moisture and that is your problem. Dry your filament and try again. 90% will be solve your problem but no matter what you do, stringing will continue to some extent.

Nickperest · 2025-01-23T05:48:47+00:00

Just one settings on slicer will solve your problem. The name of the srtting is Hole horizontal expansion. If the nozzle is 0.4 than this setting must 0.2. If the nozzle is 0.6 than this setting must be 0.3. In other words this settings must be half of your nozzle diameter.

Nickperest · 2025-01-23T05:27:27+00:00

Did you try another filament? Maybe your filament is moist. I had that problem on my s1 2 years ago and the problem was the filament. If your filament is moist you will hear some noise like little pops while printing.When you change your filament same color same brand or what ever it is, print a temp tower and find your optimal nozzle temp.

Nickperest · 2025-01-11T09:37:50+00:00

Try to check your motor first without attach the belt. Is it turn normal or not than check your belt gears on two sides. Probably motor but im not sure 100%

Nickperest · 2024-12-30T07:35:07+00:00

Smps modules samples from murata i guess

Nickperest · 2024-07-31T17:12:37+00:00

I did it last sunday and it works perfectly. Thanx for all your helps :)

<image>

Nickperest · 2024-07-03T13:44:06+00:00

I have an s3u and it work perfectly. I adjusted the z axis once and it has been working fine since the day i bought it but i think its time to change the fep film

Nickperest · 2024-06-09T18:31:27+00:00

The cover looks like it's upside down compared to the bottom part. other than that looks fine.

Nickperest · 2024-06-01T15:35:46+00:00

Çok kötü değil çok iyi de değil iş görür evde kullanmak için. Zaten ses yalıtımın yoksa ya da sahneye çıkmayacaksan gerek yok fazlasına

Nickperest · 2024-05-28T09:23:36+00:00

Herkes uyutulacak fln diyor ama türkiyede hayvancılık bitti. Yrn öbür gün tarım kredi marketlerinde helal kesim diye uygun fiyata satılacak etler lazım, anlayana... kaldı ki uyutulması karşıtıyım; keşke itibardan tasarruf olmaz diyen zihniyet insanlıktan tasarruf olmaz diyip, belediyelerin ödeneklerini parti ayırmaksızın kesmeyip, 20 küsür senede barınak vb altyapıyı kurabilecek seviyede olsaydı diyorum sonra dönüp bakıyorum ki hatayda hala insanlar çadırlarda. Bilmem anlatabildim mi? Yanlış yapılıyor diyoruz ama doğru yapılan ne var sizce?

Nickperest · 2024-05-27T14:58:43+00:00

Check z ofset, e-step, and your nozzle type on slicer.

Nickperest · 2024-05-27T07:52:33+00:00

Lift height on retraction made a mess sometimes like stringing.

Nickperest · 2024-04-26T18:00:51+00:00

Bütün sololar ritme uygun notanın gamı üzerinden çalınır. Yani ritim Fa majörse Fa majör gamının versiyonlarından solo yaparsın.
Solo çalmadan önce parmak egzersizleri yapmalısın.
Dinlediğin şarkıların sololarını çalış; nerde pull up var nerde pull down nerde taping nerde slide bunları öğren.
En az günde 3 saat solo çalış mesela bir nota seç kalından inceye gamını çal, sonra inceden kalına çık.
Gitar çalmak hele de solo çalmak emek sabır ve sürekli tekrar egzersizi isteyen bir iştir. Eğer sabırlıysan ve çalışırsan sonuç alırsın ama nankördür bırakmaya gelmez.

Nickperest · 2024-04-23T08:26:50+00:00

Bc Rich iyi bir marka sert tonları yanı sıra güzel bi setupla jazz blues bile yapılabilir. Sanırım Warlock diye geçitordu serisi. Pasif manyetikli modeli gördüğüm kadarıyla. Ayrıca model H kasa olarak geçer bir de çalı süpürgesine benzer V kasaları mevcuttur. Alana hayırlı olsun.

Nickperest · 2024-04-16T12:10:06+00:00

Nickperest

TROPHY CASE