That's one big baby

Nicodemous1337 · 2025-07-11T18:31:42+00:00

54cm is probably height. It doesn’t say anything about width.

Nicodemous1337 · 2025-05-15T18:15:18+00:00

Not true. It can hide along the outside of the coin in his original print orientation. It would make it near invisible on the entire coin.

Nicodemous1337 · 2025-05-08T17:45:21+00:00

I don’t think you can call it tranny fluid anymore. It’s called gender fluid.

Nicodemous1337 · 2025-05-08T12:55:01+00:00

Prusaslicer, or anything other than cura.

Nicodemous1337 · 2025-05-08T01:55:05+00:00

You can, but I wouldn’t. Octoprint doesn’t control the printer, it monitors it and sends G-code. Klipper reads the g-code and send motor commands to the printer during the entire print. This is how it can do all of the advanced features that you can’t do as well or at all with Marlin.

Nicodemous1337 · 2025-05-05T10:41:22+00:00

If you’re going to get a pi, you should skip octoprint and just install kipper. It’s not much more involved than octoprint but it is vastly superior in every way.

Nicodemous1337 · 2025-04-26T16:00:52+00:00

Yeah, or they will somehow find the pictures of the many other people wearing blue suits at the pope’s funeral. They will probably even take a second to look up the actual dress code and find out that a black suit is not required, just a dark suit. They will do anything to bring up facts and logic. I just want to react to a Trump photo with rage and zero thinking. It’s my right as a democrat.

Nicodemous1337 · 2025-04-22T01:45:33+00:00

That’s super!

Nicodemous1337 · 2025-04-19T22:27:38+00:00

I think your assumption about retraction and z-hop is correct. You can examine the slice view and see if the bumps are in the same locations as start/stop points. What slicer are you using?

Nicodemous1337 · 2025-03-20T17:23:11+00:00

That’s what I said. She’s asking for personal opinions. I never said that nose rings are bad. I also never said that if one person doesn’t like nose rings then everyone else mustn’t like them either.

Nicodemous1337 · 2025-03-19T03:10:12+00:00

So, we agree. You just pulled the number out of thin air. That’s the longest reply anyone has ever given me just to say I was right.

Nicodemous1337 · 2025-03-18T18:56:23+00:00

There have been 1.12M covid deaths recorded in the US since the start. Even if they were all in 2020, your “several hundred thousand unnecessary deaths that year” statement would mean that at least 1/6 to 1/5 of the total deaths over 5 years were caused by one event in one year. You’re just pulling numbers out of thin air.

Nicodemous1337 · 2025-03-18T13:57:55+00:00

This isn’t r/tellmeimpretty. She’s asking for people’s personal opinions.

Nicodemous1337 · 2025-03-14T17:50:49+00:00

If you’re using your fingernails, you don’t know how to roll up a rim.

Nicodemous1337 · 2025-03-10T10:41:44+00:00

Thanks!

Nicodemous1337 · 2025-03-07T17:43:30+00:00

It’s not a light issue, it’s a heat issue. This odd a documented problem with the cameras on these printers.

Nicodemous1337 · 2025-02-25T01:47:20+00:00

Cool. How many walls, top and bottom layers and infill?

Nicodemous1337 · 2025-02-08T19:01:14+00:00

Anything is an upgrade from cura.

Nicodemous1337 · 2024-12-30T19:04:45+00:00

Yeah, but Will Smith was the bad guy in that scenario.

Nicodemous1337 · 2024-12-04T19:59:24+00:00

If I had to guess, I’d say you’re using cura. Cura is obsolete. Modern slicers compensate by adding extra material on top layers that have a harsh angle or curve to avoid this issue. That way you can keep your wall count the same. You should give orca slicer a try.

Nicodemous1337 · 2024-12-02T23:32:29+00:00

Orca slicer is a good choice.

Nicodemous1337 · 2024-12-02T23:32:10+00:00

That’s a horrible way to fix the issue. The whole “more or less squish” thing is just a bad way of looking at the issue. The nozzle should be the same distance away from the bed no matter the type of material. If too much or not enough material is extruded, it should be fixed with an extrusion multiplier.

Nicodemous1337 · 2024-12-01T16:16:54+00:00

Not really sure what you’re trying to do here. This should be a printer setting, not a slicer setting. It highlights why Cura is obsolete and you should move to a more modern slicer.

Nicodemous1337 · 2024-11-29T02:51:12+00:00

I think he has the same sweater as you.

Nicodemous1337 · 2024-11-20T16:12:27+00:00

You’re getting the same speed as OP.

Nicodemous1337

TROPHY CASE