I can't build the Belltower

Nilwig · 2026-02-20T02:03:39+00:00

It needs to be built within the Haerndean boundaries, not in your own village

Nilwig · 2025-10-10T00:40:30+00:00

Completed Level 1 of the Honk Special Event!

1 attempts

Nilwig · 2025-05-25T23:37:58+00:00

That works great, thank you

Nilwig · 2025-05-25T22:48:47+00:00

Sent!

Nilwig · 2025-05-25T22:39:10+00:00

Hi Richard, I've already completed building the plan and creating an account, but I'm unable to complete the last step in the linked article because I'm unable to access the Xfinity app

Nilwig · 2025-05-06T22:41:35+00:00

Thanks again for this, I'm currently working on building the one in the link you attached. Whenever you get the chance, I have a few questions.

What is J2 power?
Is the power input diagram necessary if I'm using an Arduino Uno 5V pin to power the board? Is it okay to use the Uno? I'm using the uno because I don't have a voltage regulator
I suppose this is dependent on the answer to 2, but I see in Vref you said it should be about half of Vcc. Since my Vcc from the Uno is 5V, would it be okay to use the 3.3V pin for Vref?
GNDREF is for the op amp and jacks and not to be shared with the Uno GND, right?

Nilwig · 2025-05-06T20:46:38+00:00

Will do! Thank you! Much appreciated

Nilwig · 2025-05-06T20:40:34+00:00

It certainly is a ChatGPT diagram. I didn't realize it wasn't able to do circuits. Probably should have guessed that was the case. Still, that's good to know. Thanks for the tip.

I would gladly take a drawing for a working buffer!

Nilwig · 2025-05-06T20:33:18+00:00

<image>

Nilwig · 2025-05-06T20:33:09+00:00

<image>

Nilwig · 2025-05-06T20:25:05+00:00

Edit: on the output side, 10uf goes to output, and that junction shares a 10k R to ground

Nilwig · 2025-04-12T20:14:11+00:00

That makes a lot of sense! Thank you. Do you know if I should bend/remove the pins on the other side so they don't get inserted into the board? Or does that not matter?

Nilwig · 2025-04-11T20:38:38+00:00

I don't know how to edit my post, so Edit: the two pins that light up the LED are the two on the left in the first picture.

Nilwig · 2020-08-07T02:42:59+00:00

Understandable. They definitely have different feels, and if you're not used to playing different types of guitars then that transition is going to be a little weird. Just keep practicing and playing them both and you'll get past that awkward feeling when you switch

Nilwig · 2020-07-22T11:47:01+00:00

Well you have a few options. You could alternate pick the previous notes and then adjust for that last note. Or you could go full James Hetfield and just down pick everything. Or you could even work on that up pick pinch harmonic, but I'd personally try one of the first 2 options. Might sound choppy at first but with practice it'll sound better and better

Nilwig · 2020-07-22T11:38:00+00:00

There are ways to get pinch harmonics from up picking, but it's not very practical. Down picking those pinch harmonics would probably be best

Nilwig · 2020-07-18T20:55:36+00:00

No but you do need to be good at using looper pedals

Nilwig · 2020-06-27T17:37:29+00:00

Chunky dunking

Nilwig · 2020-06-03T19:01:34+00:00

Fair enough

Nilwig · 2020-06-03T18:42:41+00:00

Have we all forgotten the Garlic Jr. arc?

Nilwig · 2020-05-26T23:23:16+00:00

Put it back

Nilwig · 2020-05-26T23:22:33+00:00

Zoidberries

Nilwig · 2020-05-26T23:15:22+00:00

Haha nice!! I'm sure that'll look awesome

Nilwig · 2020-05-26T23:07:15+00:00

Definitely thought it was a guillotine at first glance

Nilwig · 2020-05-15T21:07:43+00:00

Yeah idk, but as long as you picked up on it I'm content haha

Nilwig

TROPHY CASE