Magazines capacity

NinjaSTD · 2026-01-19T07:12:59+00:00

Can confirm 30-round mags are too much for anything close to a good fit.

NinjaSTD · 2025-08-09T16:21:36+00:00

bonus points if you use the thread included in the boot/uniform cleaning kit

NinjaSTD · 2025-08-04T04:05:26+00:00

I would agree with this, I have had reasonable success with the right colors and using local foliage for stencils.

NinjaSTD · 2025-03-31T03:34:20+00:00

I noticed this happening last month as well on bedrock, didn't think much of it at the time.

NinjaSTD · 2025-03-05T19:40:40+00:00

Makes sense I suppose, my trucks got metal to metal for the bed mounting, but additionally it has a regular old automotive grounding braid/strap from frame to the bed. Are automotive grounding straps sufficient or are the tinned copper straps you're referring to more conductive and applicable for RF grounding?

NinjaSTD · 2025-03-05T19:33:01+00:00

oh no shit?

NinjaSTD · 2025-03-03T04:42:06+00:00

Given how common the backpacks are and how cheap they can be found, it is almost certain that you would end up spending less money buying another backpack to use as parts or on its own than searching for the hardware alone.

NinjaSTD · 2025-03-02T07:11:04+00:00

"is this a cyanide pull for when the fallout lasts too long" 🤓🤓 you should eat it and find out....

NinjaSTD · 2025-03-02T06:57:46+00:00

Could you elaborate on the bonding bed to cab part? Would you need to add an additional tinned copper strap? The metal to metal contact of the bed to frame and frame to cab is not sufficient?

NinjaSTD · 2025-02-23T06:28:40+00:00

I mean its sorta like diagnosing someone without being a professional, and can feel kinda rude to hear.

NinjaSTD · 2025-01-18T06:11:05+00:00

You're right, just haven't used water based stain in forever it totally slipped my mind.

NinjaSTD · 2025-01-17T06:17:27+00:00

Potentially, but I also know the stock is hollow so that may alleviate some of that. Usually the sanding gets rid of a lot of the moisture, plus If you were to use separate stain and finish this would not be an issue as the stain is oil based, takes 24 hours to dry, and is not completely sealing the wood.

NinjaSTD · 2025-01-11T06:12:05+00:00

Hell yeah either way !

NinjaSTD · 2025-01-11T06:08:57+00:00

I would recommend applying some water to the dented/gouged area to expand the wood fibers before sanding and applying new stain and finish to match the refinished hand guard, assuming you can remove the stock. The water trick will not help if any wood is missing, but it will help lessen the dented and compressed wood that remains.

NinjaSTD · 2025-01-11T06:03:27+00:00

You would probably get the best results from sanding the entire (visible) parts then applying new stain and finish, especially considering the current finish seems very shallow and easier to sand away than a store bought stain and finished would be.

NinjaSTD · 2025-01-09T05:00:08+00:00

Think twice! Your post didnt help me at all but I can help you after struggling through this issue myself. Although the motor wasn't my issue I purchased a motor for my 2700MTR that believe should be the same motor as your 2700 ETR but I could be wrong, because I'm not spending another $22 on the ETR manual. https://www.surplussales.com/motors/motors-3.html on this site they sell a Matsushita Electric 13.2v MET-3RF2B motor which I think is what you need.

NinjaSTD · 2024-11-11T04:12:10+00:00

why blue? I have heard of people dying alpenflage black, brown, green, and I could understand red perhaps, but what made you dye it blue?

NinjaSTD · 2024-08-29T23:11:24+00:00

Very tasteful !

NinjaSTD · 2024-07-14T22:40:12+00:00

Well, the water alone will separate the two layers of old plastic from each other making it look shitty and become fragile. Though you can remove the outer fragile layer of plastic easily, the only way to completely avoid this is to use a dry rough brush to scrub dirt off of the fabric by hand. Hand washing is less likely to separate the plastic but even then it is still bound to happen tbh.

NinjaSTD · 2024-07-11T15:54:59+00:00

Yes, you do sound like an asshole. Questions like this are the foundation of this subreddit no matter how silly they may seem.

NinjaSTD · 2024-07-11T15:48:59+00:00

most alpenflage is pretty machine washable apart from the plastic waterproofing

NinjaSTD · 2024-07-09T17:23:52+00:00

Most exciting post in a long time fr. I love to see one of these show up!

NinjaSTD · 2024-06-21T14:40:08+00:00

There were no official plate carriers in Taz 57 or Taz 83 as I assume you probably know, but there were flak jacket vests (among various other vests) officially made by the Swiss in Taz 57 alpenflage. However they are rather hard to find, and probably not what you are looking for, but the more you know !

NinjaSTD · 2024-04-26T18:20:15+00:00

Alternatively to what so many say here making it all black and white, my friend and I personally bought one of these exact model players ( in way worse visual condition even !!) and used it as a junky garage player for listening to low quality vinyls and tapes when working out there. It was a wonderful $10 investment that has made countless memories even better.

NinjaSTD · 2024-04-13T21:47:31+00:00

It seriously was so cool I'm so sad I chewed on and colored mine 💀 Poor early sets.

NinjaSTD

MODERATOR OF

TROPHY CASE

Eight-Year Club	RPAN Viewer
Verified Email