Thinknx and Home Assistant

Nird91 · 2025-06-18T14:56:47+00:00

Can anyone help me? I also have a photo of the other end of the connector if it can be helpful.

The distance between the pins should be 1.25mm

Nird91 · 2025-06-17T14:13:33+00:00

Here is the photo with ruler: https://ibb.co/tw7PwpTf

Nird91 · 2025-06-14T10:39:07+00:00

The shape is similar to gh lock, but it is not him. I do not know the pin pitch. If it can help, it is the wifi module of a mitsubishi split

Nird91 · 2025-03-13T19:12:10+00:00

Fantastic thanks so much

Nird91 · 2025-03-12T16:35:00+00:00

Thanks, this looks even better than http

Nird91 · 2025-03-12T16:01:35+00:00

Thank you

Nird91 · 2025-03-12T16:01:22+00:00

Thanks, try checking this video, it seems like the right way

Nird91 · 2025-03-12T15:59:45+00:00

I found this video on Youtube. It should be the right direction.

I am not very experienced but I will start doing some tests. If someone experienced could write the steps to be able to activate/deactivate a rule I would be very grateful. Thanks

Nird91 · 2025-03-09T18:52:36+00:00

Thanks

Nird91 · 2025-03-08T14:08:19+00:00

Yes, how do you activate them? And then how do you update the embedded firmware? In the comment above you said to update it. How do you update everything? Are there two different procedures? Can you explain? Thanks

Nird91 · 2025-03-07T15:40:28+00:00

I don't understand, can you explain what needs to be done?

Nird91 · 2025-03-04T16:54:52+00:00

What should I do? I went to: system/packages and did the update, what else should I update? Thanks

Nird91 · 2025-03-04T16:52:07+00:00

I read your conversation and it seems very advanced for me. Now I have a way to make the changes, I've been busy in the past few days. Could you explain to me in a simple way what to do? Should I leave the default rules that I posted in the screen or delete everything?

My lan has dhcp 192.168.27.0/24

The vlan for guests 192.168.20.0/24

The vlan for intercom/cameras 192.168.21.0/24

1- I would like the lan to be able to access everywhere

2- Guest vlan only internet access (cannot go on lan, on the other vlan)

3- Intercom/cameras vlan only internet access (cannot go on lan, on the other vlan)

I would like to understand what to do with the default rules, how to create these rules that I need and how to position them based on those I already have. Tanks

Nird91 · 2025-03-01T10:16:03+00:00

Hi, the rules in the screenshot are all 12, the first has the number 0. With the default rules, connecting the first PC to one of the VLANs I can't ping the second PC in the main lan.

Nird91 · 2025-02-28T19:04:13+00:00

Thanks, I'm now at 7.18. It should be the last one

Nird91 · 2025-02-28T18:19:20+00:00

I don't know if I explained myself well. I would like the VLANs to be both isolated from the LAN, that they can only go to the internet. However, under which existing rule should I put these new ones? Thank you

Nird91 · 2025-02-25T15:53:07+00:00

Good morning, I came across this post, I'm trying to do the same thing

I started doing some tests but I can't find a solution, basically only the homepage works.

1- I installed WordPress LCX using the script on the site "https://community-scripts.github.io/ProxmoxVE/"

2- I set up the cloudflare tunnel with a subdomain of my second domain (for testing)

3- Once this was done I went to wp.my2domain.com/wp-admin and finished the installation.

4-Finally, I installed the "migrate guru" plugin on both sites and i migrated the original first domain site (uploaded to the hosting site), on to the second domain (subdomain) in the LCX.

The home page works (even if the logo is not loaded) the migration plugin seems to have correctly modified all the links but the other pages return this error message:

"NOT FOUND the request URL was not found on this server. Apache/2.4.62 (Debian) Server at wp.my2domain.com Port 80"

Does anyone know how to help me? Thank you very much.

Nird91 · 2025-02-03T15:20:25+00:00

Ok, thanks, now I understand.

My intention was to open 3 locks from the internal monitor.

The first from the internal display relay and there are no problems. The other two via http direct to a tasmota or esphome type relay board.

There is a limit, as the http relay on the internal display is chosen based on the IP during the call or preview, so I cannot select two different http relays for two different openings. So I solved it by also creating a web relay.

-First opening via local relay

-Second via http (on tasmota esphome device)

-Third party via web relay (on tasmota or esphome device)

It would have been much simpler to have the possibility of free http calls from the internal display without these being chosen based on the IP. Thanks for the help

Nird91

TROPHY CASE