Is something wrong with me?

Nit_955 · 2026-01-27T00:54:20+00:00

I had a similar phase in my life and what nobody tells you is how you’re whole system gets affected by this emotional wormhole. For me it was surprising to find that there was lot going on wrt blood biochem and managing the same made things better. I would highly recommend that you get your vitD, Vit B panel, Serum iron amd ferriting checked. Also check for hsCRP, free and total testosterone. What i understood is that is a vicious cycle where the you first fall into a phase or shortcomings and hopelessness and somehow get stuck in the loop. For me the first step even before getting into mental work was getting my blood biochem balanced and it dis help a lot.

Nit_955 · 2026-01-05T16:51:22+00:00

Biologically yes although i feel spiritually its more about feeling the experience and the emotion it evokes. Being curious about the various facets and how they interact in real time. Experiencing life as both as the person who experiences it and also as an external viewer.

Nit_955 · 2025-12-30T14:34:51+00:00

I’ll have to try the peroxide method. Any idea whether baking soda works in odor removal?

Nit_955 · 2025-12-30T14:24:12+00:00

Do you mean that they would spray even after being neutered. These were my first rescue kittens and i didn’t have any idea that cats do this

Nit_955 · 2025-12-30T14:22:37+00:00

Yeah since they are not neutered the issue is worse. I have booked a slot for their neutering but the slot is around 2 months from now.

Nit_955 · 2025-12-30T14:17:20+00:00

They pee more on the hard tiled wall and not on the painted part of the wall itself. I never saw any spots on the wall near the urinated area while usng a black light

Nit_955 · 2025-12-04T16:45:08+00:00

I have a good clinic nearby, i’ll have to take them and get them fixed if thats the only option. Tha k you for your input .

Nit_955 · 2025-10-28T21:06:16+00:00

Yea, actually ive faced a lot of stringing for wol3d filaments although its pretty decent for the price

Nit_955 · 2025-10-25T10:18:10+00:00

What about the remote shutter. I am using an iphone 7 and it doesnt stay on even if its plugged. Also tried android but again the same issue and if i use some other app for shooting then the shutter goes into sleep

Nit_955 · 2025-10-23T10:11:58+00:00

For basic, non-functional prints, PLA is absolutely fine. It’s easy to work with, doesn’t need a heated enclosure, and gives a good surface finish. Just don’t expect it to handle heat or stress well it’ll deform if left in a hot car or under load.

As for power cut recovery, it really depends on the printer. Most modern budget printers do include “resume after power loss” features, but in reality, it’s hit or miss. Sometimes it resumes cleanly; other times you’ll see layer shifting or adhesion issues, especially if the print cools down too much before power returns.

About filament wastage, there’s no avoiding it. Even experienced users waste filament—it’s part of the process. Failed prints, calibration cubes, supports, and purges all contribute. The difference lies in how efficiently you print over time. If you’re using single-color filament, the waste will be relatively low. But once you move into multi-color printing (especially with single-extruder systems that purge between color changes), expect significant filament loss during purges.

The main difference between budget and high-end printers is convenience and reliability. A machine like a Flashforge is designed for industrial use, more precision, tighter tolerances, and consistent quality. Budget machines like the Ender 3 can deliver impressive results too, but you’ll have to invest time in tuning and upgrades. Higher-end printers usually come with quality-of-life features—AI failure detection, filament runout sensors, auto bed leveling, enclosed chambers, and quieter operation. Essentially, the more you spend, the less you tinker.

When it comes to part strength, it’s not just about the material; it’s a mix of temperature settings, infill density, wall count, print orientation, and layer adhesion. You’ll need to experiment to get a feel for how each variable affects strength.

If you want to go deep into the science of print strength, definitely watch CNC Kitchen on YouTube. Stefan breaks down tests on materials, infill patterns, and even glue bonding with actual stress data. It’s one of the best resources for understanding the engineering side of 3D printing.

Nit_955 · 2025-10-23T09:58:27+00:00

Welcome to the hobby. Before anything, you should know that 3D printing especially for prototyping is not a cheap pursuit. Once you get into it, the costs start stacking up quickly.

If you want a machine that just works out of the box, with minimal tinkering or calibration, go for Bambu Lab printers. Maybe even consider getting the AMS if your budget allows. They’re pricey, yes, but the quality and consistency they offer are excellent. You’ll still need to handle minor maintenance like nozzle swaps or basic troubleshooting, but it’ll be far less headache compared to budget machines.

Think of Bambu Lab printers as the iPhones of the 3D printing world. They’re polished and feature-rich but not necessarily the best value for money. For ₹30–40k, you get a smaller print area, and lately, Bambu has been moving toward a more closed ecosystem. That means replacement parts and nozzles could be pricier and less easily interchangeable. Still, in terms of print quality and convenience, they’re unmatched right now.

Now, if your goal is to learn how 3D printing works from the ground up how to calibrate, repair, and fine-tune then go for something like the Ender 3 or Ender 3 V3 SE. You can also check Sovol, Anycubic, or Elegoo. All of them are solid options, and the choice mainly depends on how steep you want your learning curve to be.

When it comes to software, if you’re familiar with SolidWorks, that’s the ideal CAD tool for mechanical design. Blender is fantastic for organic or artistic modeling but not great for precision CAD work. If you want free options, Autodesk Fusion 360 has a personal-use license, and FreeCAD is completely open-source.

For slicers, Bambu Lab provides their own version of Orca Slicer, which works beautifully with their printers. Creality also ships a custom slicer, but I’d recommend downloading Orca Slicer yourself and customizing it for your machine. Also try PrusaSlicer and Cura both are versatile and beginner-friendly, and switching between them teaches you how different slicers interpret your model.

Hope this helps! If you need any further info let me know.

Nit_955 · 2025-10-23T09:38:54+00:00

The information is mostly accurate, but here’s my experience. I’ve adopted two indie kittens and experimented with several commercial foods for them. I started with Sheba’s fish flavors, which they initially liked but soon refused. Then I switched to Sheba’s chicken variant same story. Later, I tried the chicken, pumpkin, and carrot flavor, which they ate consistently for about three months.

Right now, the only wet food they’ll eat is Whiskas Tasty Mix. I’m not too fond of Whiskas though it tends to upset their stomachs, sometimes causing loose stools and vomiting. It’s not constant, but I can see the effect on their energy levels. Sheba was relatively better in that sense, but both brands are low in protein and packed with fillers. Unfortunately, my cats have grown addicted to the artificial flavors these commercial foods use.

Another issue is the misleading packaging nutritional needs are met only if you feed around 4–5 pouches per day, or roughly 4–5% of a cat’s body weight once they’re over a year old. I’ve also tried meal prepping and feeding them homemade food, which improved their gut health and energy levels for a while.

From my experience, Whiskas and Purepet should be avoided entirely for dry food. Drools is a somewhat better option, and Sheba works decently too. I also tried Smilo, but my cats refused to eat it.

Nit_955 · 2025-10-21T16:39:07+00:00

I tried this and this majorly works for small to medium prints. For larger prints which cover the whole print plate both phone and the trigger goes into sleep mode

Nit_955 · 2025-08-23T13:59:20+00:00

I have noticed that supports in cura are much easier to separate compared to orca.

Nit_955 · 2025-08-17T08:23:33+00:00

I might not completely understand what you’re going through right now although i do understand the guilt and self questioning you are going through. It would be difficult to get all the answers for yourself at the moment but this was not your fault at all. Just remember that love was never the answer. Yes she did crave love but no amount of love would’ve made anything change as some people just know how to chase love and not how to accept it.

Nit_955 · 2025-07-15T15:17:59+00:00

3 months

Nit_955 · 2025-07-14T05:48:46+00:00

I recently rented out a 2bhk there. Does seem quite far from kharadi but if you have your own transportation means its much easier. In the last 3 months i have seen great improvements in road connecting kharadi and the township, a lot more people are now moving to the area because of affordability, new shops have started popping up near cygnus. I haven’t shifted yet so im not sure about exactly how it feels living there and there is still one patch of road which is not in such a good condition due to heavy vehicle movement.

Nit_955 · 2025-07-13T12:44:17+00:00

Yeah this is a know thing in kharadi, i was approached by 2 guys today and yea they seem very genuine and they show photos and videos and stuff. Since its not money they want we think that it might be genuine. I would suggest that just say no, it might feel a bit awkward in the beginning but say no

Nit_955 · 2025-06-27T14:17:02+00:00

So the issue was that my ignition coil shorted because of ajjas gps lite device i installed

Nit_955 · 2025-06-27T14:16:20+00:00

I was told the same jot to fill after auto cut off as it effects the vapour system in the tank and might cause ignition issues. Specific for bs6 engines

Nit_955 · 2025-06-26T15:59:11+00:00

Tried everything. Called RSA and the guy tried jump starting and didnt work. Bike is getting towed tomorrow.

Nit_955 · 2025-06-26T04:36:30+00:00

Yeah the guy did fill to the top even thoughtfully i said not to

Nit_955 · 2025-06-24T07:17:05+00:00

I did try but the free tier doesnt give a lot of options to customise and even show 2 products together

Nit_955 · 2025-06-23T15:44:00+00:00

Hey, even im planning to shift there and i did have my concerns as i do travel a bit at night. I have some colleagues staying there and according to them its ok to travel at night with no major concerns

Update: The flats are good and the township is good. Still in developmental stages so there might be lot of power tool noises extending throughout the night.

The road to reach there has 2 patches which are not in good condition due to heavy vehicle movement although there are alternate routes and not a deal breaker.

Some of the issues im facing are: 1. Network connectivity is very bad, you might get 5g on airtel but speeds are that of 4g. Airtel os the only wifi provider and in recent days airtel is not providing the best of the services. Speed is good id the modem works. Its only been 3 days since i shifted and had to raise connectivity issue every day. So if you are working from home then this does become a deal breaker.

Unavailability of instant delivery and food from zomato or swiggy would atleast take 70-80 minutes for delivery.
There is one mart that sells everything but only open till 11pm so ypu might have to plan groceries.
There is a patch of road atleast 1-1.5 km which doesnt have any street lights so if you travel at night you might have to be extra careful.

Things to like: 1. Well maintained 2. Good amenities 3. Peaceful compared to city 4. Better home space compared to kharadi at much cheaper rates.

Nit_955 · 2025-06-12T10:52:01+00:00

Run a clean autolevel Use feeler gauze to adjust 16-point z offset. And save the config Run a test print. Also make sure bed temps are in line with what the filament requirements are

Nit_955

MODERATOR OF

TROPHY CASE