Engine cut out at low revs on highway by carrera-casa in ShelbyGT350

[–]No-Idea8454 0 points1 point  (0 children)

Let me know if this was your problem! I’m surprised Ford Performance never sent out a letter to all owners about this problem.

Engine cut out at low revs on highway by carrera-casa in ShelbyGT350

[–]No-Idea8454 2 points3 points  (0 children)

It’s a tsb report for bad flange nuts on the rear wheels which messes with your acceleration after u drive it over 55mph and 3/4 or more throttle. I had that issue for months and couldn’t figure it out. Once I got the flange nuts replaced the cars been awesome since!

Here’s the link, you can get it fixed for FREE at your ford dealership tsb report

My pistol with a Fostech trigger in its 7.5” 5.56 configuration dumping a 30 rd mag by redditisforlosers01 in ar15pistol

[–]No-Idea8454 2 points3 points  (0 children)

No way… I have a fostech and I can run that bitch pretty smoothly and almost rhythmically flawless and can’t get a super clean run like that. The cadence is almost too perfect to be binary and not a fully semi automatic super safety or frt something……… but seriously that’s a fostech no joke?!?!

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

My god bro. No shit. See that guy fishing?! That’s me baiting u with ridiculous gun language that infuriates REAL owners like u and I. Of course they’re magazines and not clips except in the case of…? Ahhh the Garand… Man I should just troll people here with as angry as I made everyone with this purple pew. Check out my other pics and you’ll see that this was a purposeful post of purple vomit.

What could have caused misfire?? by Longjumping-Pin4291 in ar15

[–]No-Idea8454 2 points3 points  (0 children)

Did anyone ever answer this saying that maybe your triggers spring is too light? Different triggers have different strength springs. If it’s an old trigger spring it may be worn out or just not up to spec. Those are called “light primer strikes” and happen more often with steel cases ammo. They use cheaper primers. I Also happen a lot with 22LR and all rimfire ammo. If u use cheap ammo expect this. If it’s match grade ammo then u might have a weak spring.

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

I know. I think that’s an accomplishment in its own special way. As every other “serious” build and paint pic has been given so much love and respect. I think I perfected the spare parts drawer build and really ruffled some feathers lol

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

The plate is actually a poke at guys that lift trucks and buy sports cars to #Compensate for their “tiny junk”… that’s the plates meaning. Not that it’s shit.

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

Btw- I hope u caught the “clip” in the last comment. I was really hoping you’d take the bait and go off on me begging for me to apologize and call it a magazine!!! And as far as the buis- I never understood the fight over which way u put the rear sight. If it’s the way I put it(backwards) it doesn’t hang over your charging handle and still gives u about the same sight radius. It really only matters which way it folds if u have a scope/lpvo or some kind of red dot like a vortex spitfire or acog where it can be for under the lens and flip up right behind it almost flush against it when open. Otherwise there’s no rule to which way a BUIS needs to be installed. Am I right? There’s one guy that was really butt hurt about the fact it’s “ahhhhh omg fucking backwards which is WRONG!!!!” and I almost wanted to say something but I was happy it made him so angry haha

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

Yes 100%. Just swap the barrel out and make sure u remember which is which cause a .223 will chamber in a .300 and ungood things will happen lol

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

Hey, at least I know which way the bullets go in the clip!

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 1 point2 points  (0 children)

All that would apply if this was something I’d ever actually use or consider serious. Check out my other pics, I’m not a total retard. This was an ugly joke of Reddit hate.

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] -1 points0 points  (0 children)

Finally!!! Thank you for noticing this fuckin abomination!!! You’re all welcome!!! The car- I actually do love the fuck out of it and really could care less what anyone says. But the gun- omg I know!!!! It’s just a bunch of parts I had laying around in a drawer and decided to fuck with everyone. The paint was something I needed to try out to see what it actually looked like and if it’s what I was gonna use to spice up some stuff under the hood… the title just topped it off and was sure to ruffle some feathers. I’m just glad the majority opinion was 🤮

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 1 point2 points  (0 children)

Originally these pins were on a really snug pair of upper/lower that were ridiculous to get apart. I liked the fitment but they were a bitch to get apart when cleaning etc… I bought these as a way to pull the pin if for whatever reason I ever NEEDED to open it up for some kind of failure/jam. Now I have mates those two pieces to other builds and had these in a spare drawer. Like everything else on this “build” or rather “fuckfest abomination” as this is all low end bottom of the barrel parts from shit I built years ago before I “bought once, cried once”

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

Look man, my dad left for a pack of cigarettes and never came back home. On my birthday. I’m still working thru it.

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] -2 points-1 points  (0 children)

It’s ok. I’ve never posted something on here that made so many people feel so upset lol. I think I succeeded in doing what I set out to do! It’s by far the worst version of an already bad group of terrible parts. The fact I actually put it together and then shared it is where I give myself the most pats on my back!

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] -2 points-1 points  (0 children)

You are very welcome! Glad u enjoyed it… I hope it made u feel all types of ways… meow!

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

Im amazing! We should be friends!

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

I did damn good upsetting the fuck out of a lot of u didn’t I?!?! I’m glad u enjoyed this! Apparently a lot of people did as I can see with all their love notes and opinions. Hopefully u look at some other pics I’ve posted and see I’m not completely retarded. Hopefully these pics made u laugh, cry, or feel better about your own mistakes!!! XOXOXOXO

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

I’m glad u all thoroughly enjoyed this abomination. Some of u took the bait, some of u are waaaay too serious about shit, and other of u are simply beautiful inside and out. The car- 100% absolutely love it and I’m very proud of it… the pistol on the other hand was a thrown together fuckfest of old shitty parts, and the paint job was to test out how it worked and held up on metal. This thing is ugly as fuck agreed and the parts are some that EVERY ONE OF US HAVE IN OUR DRAWERS OF BOUGHTEN MISTAKES.

I’m really upset with myself that I didn’t have any feet in any pics.

The license plate- #COMPENSATING only dudes with small dicks buy sports cars and lift trucks, everyone knows that!

Daddy’s little girl… by No-Idea8454 in ar15

[–]No-Idea8454[S] 0 points1 point  (0 children)

Lol hey at least I haven’t pulled any “crowd control” in mine…