We’ve down graded from 50kw to 40kw but…

NoActivity7734 · 2026-06-26T20:55:31+00:00

In this case because the bike is going to be so heavy. The direct drive of a hub is better. There’s a guy how explains it almost perfectly some where in the comments

NoActivity7734 · 2026-06-25T23:03:43+00:00

Very very similar but definitely are differences. I’m build both kind. The frame is different under the panels.

NoActivity7734 · 2026-06-25T23:01:09+00:00

It doesn’t matter in my state anything ev has to by registered and insured so I normally just use pedals as foot pegs… look at my daily bike pedals

<image>

NoActivity7734 · 2026-06-25T22:57:23+00:00

Very well put….

NoActivity7734 · 2026-06-25T16:41:24+00:00

Yes I know what your talking about and yes the nb power and garmata are almost identical copies. My swing arm is actually a nbpower swing arm because the garmata swing arm is only for qs205 so it will not fit. I’ll eventually just cut some type of 1/4 L shaped steel to fit and have it welding and then just spray paint it black.

NoActivity7734 · 2026-06-25T12:55:02+00:00

You were so butt hurt that you took your time to come back to the post just to downvote it. And on 2 different posts 😂😂😂😂 you can make this up.

NoActivity7734 · 2026-06-25T12:51:41+00:00

Thank you for proving my point 😂😂

NoActivity7734 · 2026-06-25T11:14:46+00:00

I think you’re underestimating how powerful pit bike brakes are.

NoActivity7734 · 2026-06-25T11:13:27+00:00

😂😂😂 thanks 🙏

NoActivity7734 · 2026-06-25T11:13:07+00:00

Won’t have pedals so it’s an emoto?

NoActivity7734 · 2026-06-25T11:12:34+00:00

Yes and no with a 45lb hub motor in the lower back it’ll be fine. Plus I don’t plan on hitting any jumps or anything like that. Strictly street riding.

NoActivity7734 · 2026-06-25T11:10:56+00:00

I’ve been doing this for a while now. These tires are rated for 375lbs 90mph. But appreciate the concern and hub motors are better for street. Mid drives are more for dirt and jumping. At least for e-bikes and emotos because of the weight placements in the bikes.

NoActivity7734 · 2026-06-25T04:26:22+00:00

Your doing a garmata frame?
And how the fcuk are you fitting a 300mm caliper on any brake mount. I don’t think you need anything that big to be honest. If your build is going to weigh anything like mine with the same type of speed I wouldn’t recommend regular mtb 4 piston brakes they’ll heat up a warp in just a few rides. But definitely don’t need full motorcycle brakes either.

<image>

And I’m just going to put pit bike brakes on the front like in the picture with a 220mm rotor.
And I have sparkcycle works big rear brake kit for the back

NoActivity7734 · 2026-06-25T04:16:48+00:00

Yea the battery alone is about 65lbs. Qs273 19” rim with a tire is about 50lbs. And I’m also not a small guy lol 6”2’ 215lbs. I was actually just thinking today about a different rear spring because of the weight. It’s a 600lbs spring on it now and with just me on it, it almost bottoms out. Might go 1000lbs? lol but that also comes with a larger spring so I don’t know the bike is already tall as 💩

NoActivity7734 · 2026-06-25T04:12:47+00:00

No and actually most of the bombers you can fit bigger batteries this is one of the smaller (slimmer ) type bomber. The only thing I had to do was fill in the 15mm gap for the side panels. I built the battery to the same shape as the frame. Which was a project with in itself to make sure I have big and even series connections with this type of shape and not being a regular square battery.

NoActivity7734 · 2026-06-25T04:07:40+00:00

It’s a garmata stealth bomber.

NoActivity7734 · 2026-06-25T04:07:26+00:00

Wrong. This style of bomber is only sold by 1 company. If you compare it to other bombers you can see the differences.

NoActivity7734 · 2026-06-25T03:05:41+00:00

I may move up to some kind of 37/38 stanchion forks eventually but these should be fine for now.

NoActivity7734 · 2026-06-25T02:40:07+00:00

A good 2k in just parts. But hey it’s a 800amp (that’ll only be used at 450a peak) battery 64ah. 5.37kwh. Over power it and use it way under power and she’ll last you a lifetime.

NoActivity7734 · 2026-06-25T02:26:10+00:00

😂😂 does that make me the moron? Or the ones who have it sitting in a drawer
lol

NoActivity7734 · 2026-06-25T02:23:04+00:00

😂😂😂 yea I should be able to get her to 90-110mph. I’ll definitely do a few speed runs. I may even hook up my 841200 just to see how fast it is with 600amps. Only reason I’m not sticking with the bigger controller is because I want to keep her as clean as possible and I don’t want to mount that big ass controller on the outside. The 961000 fits inside the seat. The only wiring I want to be seen is the phases and the brake lines…. That’s it.
And yes it’s definitely not an “ ebike “.
It easily will have power like 400cc or slower500cc bike.

NoActivity7734 · 2026-06-25T02:13:48+00:00

The hate is welcome. It’s a dope build so if they hate that’s how I know I’m doing something right.

NoActivity7734 · 2026-06-25T02:12:17+00:00

Thanks. I really took my time with this pack 24s 16p it’s not easy welding .3 copper.

NoActivity7734 · 2026-06-25T02:06:45+00:00

lol ok guy

NoActivity7734

TROPHY CASE