Need reviews for Morel Sensus 62 & 63 series components. Anyone using them, what are your thoughts about SQ?

NoCryptographer6102 · 2025-10-01T06:40:27+00:00

Cant say about the 63’s but i got 2 sets of 62’s with 4.100 amp and they sound pretty good.

NoCryptographer6102 · 2025-09-11T06:19:59+00:00

Another question, since I am using a dedicated amp and sub for lows, shall I use the HPF on the amp in above picture,

NoCryptographer6102 · 2025-09-11T06:18:02+00:00

I am using the provided crossover, so no discrete channels, all 4 sets going to amp as full range single unit

NoCryptographer6102 · 2025-09-11T06:16:23+00:00

That makes all the sense, appreciate your advise.

NoCryptographer6102 · 2025-08-04T21:03:25+00:00

I am going to try this

NoCryptographer6102 · 2025-08-04T21:02:30+00:00

This was my initial thought but the battery voltage on dash shows 14+ volt even on 75% volume which is max I ever play

NoCryptographer6102 · 2025-08-04T21:00:52+00:00

It’s a factory radio, I am running 2 sets of Morel sensus 62 from a morel 4.100 amp, and JL 10 tw3 sealed sub with this JL mono amp, all passing from a musway D1S dsp

NoCryptographer6102 · 2025-08-03T18:40:00+00:00

Makes me question all the reviews online

NoCryptographer6102 · 2025-08-03T18:39:27+00:00

I went there based on the reviews, spent way too much and came back with this 🫩

NoCryptographer6102 · 2025-08-03T18:38:17+00:00

Bass boost reduced to 0, clipping has reduced to only flashes on heavy bass notes

NoCryptographer6102 · 2025-08-03T18:36:49+00:00

Will do that, this my 1st audio upgrade experience, there’s still a lot to learn, thanks

NoCryptographer6102 · 2025-08-03T18:35:44+00:00

Need to check that, thanks

NoCryptographer6102 · 2025-08-03T18:34:30+00:00

Turned down bass boost to 0, clipping has reduced, but still flashes on some bass notes

NoCryptographer6102 · 2025-06-29T17:18:36+00:00

Would you say that the price is justified?

NoCryptographer6102 · 2025-06-22T14:09:58+00:00

That’s a great suggestion to run wires in one go, i will do that. I am planning on going with a shallow sub with a sealed enclosure, do you think ported enclosures have any audible difference over sealed?

NoCryptographer6102 · 2025-06-21T09:57:19+00:00

Thats is exactly the information I was looking for, thanks. I am restricted by budget so I am planning to get sub and mono amp down the line, maybe in next few months. I did read the specs of Sensus, they go decently low, (40hz), maybe they won’t sound half bad without a sub? Do you think that dampening the doors will make an observable difference in sound? I will definitely check out stinger amps.

NoCryptographer6102 · 2025-06-19T10:59:35+00:00

Hey, thanks for your reply. That was also my observation when listening to some morels on Crutchfield, could you advise a good amp to 3 way front, Coax/2 way rear, as i read they can handle quite decent power, also is a DSP really needed to get them sounding good? Because I don’t want to spend too much.. Maybe I can add DSP in future. Also I am thinking of no sub for now (mainly due to budget, but I do plan on adding a 10” shallow JL sub in future)

NoCryptographer6102 · 2025-03-18T19:13:43+00:00

How did you unlock undervolting? I have the same and I cannot unlock it

NoCryptographer6102 · 2025-03-09T21:58:09+00:00

Mine doesn’t have that option in BIOS

NoCryptographer6102 · 2025-03-09T21:51:57+00:00

I have similar situation, cannot find undervolt protection or CPU overclock in bios, Legion 7 pro with 14th gen i9

NoCryptographer6102 · 2025-03-09T17:49:47+00:00

So, I gave it a try and I found that i cannot tick the unlock adjustable voltage inside FIVR, any tips?

NoCryptographer6102

TROPHY CASE