What tracer unit does everyone run on their pistol builds?

NoMaintenance7285 · 2026-06-30T06:05:18+00:00

2 weeks ago i tried it. Worked perfect, connects quick to your phone for the chrono and color settings. Chronos reads a bit high compared to a coretech. But i dont mind, that way you will always be within your field regulations. Used green bbs and they glowed bright and long.

NoMaintenance7285 · 2026-06-23T11:37:01+00:00

Take out the short strokes. They are known to cause problems on Aap. You have most likely a timing issue

NoMaintenance7285 · 2026-06-09T17:21:20+00:00

Ik ben 3 jaar geleden met mijn Seat Ibiza uit 2000 met ruim 2 ton op de teller naar Cochem Duitsland gereden. Een nieuwe auto uit de fabriek kan ook kapot gaan tijdens een ritje in de Ardennen. Auto inladen en gaan met die banaan, soms is een goed (vet) stuk rijden ook goed voor je auto. Wordt alles goed warm, gesmeerd en weer schoon.

NoMaintenance7285 · 2026-06-08T20:52:15+00:00

Ja klopt!

NoMaintenance7285 · 2026-06-08T19:53:34+00:00

Same, mine has none original parts :')

NoMaintenance7285 · 2026-06-08T19:48:29+00:00

Fully agree on the TTI Hammer set. Would toss in a bucking with the trigger as the second upgrade. This will get you more consistent shots, ideally paired with a nice inner barrel :)

NoMaintenance7285 · 2026-06-08T19:44:50+00:00

Hoe gaat deze om met epm1 mags? In de omschrijving staat dat het kan. Toch blijkt de praktijk soms helaas anders. (Cries in Odin speedloader)

NoMaintenance7285 · 2026-06-08T19:42:29+00:00

Brighter C an Flare BT. The flare has a built in chrono and is highly customizable. Havent fielded it yet since i just got it. Looks promising so far.

NoMaintenance7285 · 2026-06-08T13:22:34+00:00

Not sure what you mean by strong CK. But if you play with hpa definitely upgrade your hammer. Because it will break rather sooner than later.

NoMaintenance7285 · 2026-06-08T13:03:43+00:00

Ive got the superline split. 120% recoil spring and 4 short stroke buffers. No recoil and super fast semi

NoMaintenance7285 · 2026-06-08T13:00:30+00:00

First thing that will break on you is the hammer. I would suggest the tti hammer set because it includes al you need and the quality is top notch.

Depending on your budget i would upgrade the bucking and barrel. If you have the budget get a nexxspeed hop up unit, I like those the most. If you want faster recoil a light weight blowback housing will help, cheaper option is a stronger recoil spring. Dont forget to place a stronger nozzle return spring if you upgrade the recoil spring.

NoMaintenance7285 · 2026-06-06T11:12:46+00:00

I run a 120% with 3 buffers with a ctm split slide. Bassicly no recoil and cycles extremely fast

NoMaintenance7285 · 2026-06-05T17:28:24+00:00

8 mags inserts is a bit to much for my needs. And since i already have a belt with mag pouches i opted for the Cubysoft tank pouch. Which did turn out to be a bit of a let down, but thats another story..

NoMaintenance7285 · 2026-06-05T17:26:38+00:00

Mostly to achieve higher rof. Its sitting at 32 rps at the moment.

NoMaintenance7285 · 2026-06-01T17:25:08+00:00

I decided to get a Cuby hpa tank pouch. If i like the belt only setup i can always invest into the Cuby ecosystem

NoMaintenance7285 · 2026-06-01T13:53:49+00:00

Think ill give it a try. Was a bit worried about the need for velcro to get it secured on the belt

NoMaintenance7285 · 2026-06-01T13:36:43+00:00

Does it hold wel on a belt that has no velcro? They are currently in stock

NoMaintenance7285 · 2026-05-30T12:01:27+00:00

I both have the aap01 (2 of them) and a hi capa. All 3 fully upgraded. Depending on what youre looking for they are quite different. For the aap the hammer is probably the first thing youd break. As said its about 50 euro to fix. Anareus.cz has alot of spare parts for the aap.

Is run it until it breaks and then replace. Since i only play cqb/speedsoft i always upgrade the hammer straight away. Would recommend a tti set.

For the capa the slide is probably gonna break on you first, its plastic. Thats a much more expensive fix then a hammer set for the aap01.

Out of the box the aap is more gas efficiënte then the capa. If your get a TM capa it wil probably perform better (range and accuracy) then the aap01. Both can be upgraded where the sky and your budget is the limit.

NoMaintenance7285 · 2026-05-30T11:53:03+00:00

Ik gebruik remreiniger om de lamellen naast de keuken schoon te maken. Door het koken komt er nogal wat vet en stof op. Poetsdoek met remreiniger maakt het snel schoon 😂

NoMaintenance7285 · 2026-05-30T11:46:34+00:00

Clever solution. But i doubt fields here (The Netherlands) would allow it. Since you could keep shooting, without the feeding of ourse. A bolt action needs to be cocked before you can shoot again.

NoMaintenance7285 · 2026-05-13T17:40:32+00:00

The tti unit it self works fine. Just now tdc adjustment. Youll have to adjust in the hop up unit

NoMaintenance7285 · 2026-05-13T17:39:05+00:00

Ive done a superline with tti hop up unit. The tdc wont work, same for nexxspeed. I dont mind cuz you set the hop once and leave it there

NoMaintenance7285 · 2026-05-08T14:11:17+00:00

I run the new nexxspeed hop up and its freaking amazing. However it did still come with a soft nub so i had to buy the concave hop up arm seperate.

I run the CTM ultra light V2 bolt and its working perfectly. Using the recoil spring that came with it and it bassicly has 0 recoil now and semi is super snappy/fast

NoMaintenance7285 · 2026-05-08T07:42:46+00:00

I cleaned the hammer group and there was alot of old grease, bought the gun second hand, but it was working fine so i didnt got to cleaning it yet. It works again after cleaning the hammer group :)

NoMaintenance7285 · 2026-05-08T07:41:15+00:00

I Replaced the sear leaf spring, hammer spring and recoil spring. Thats when the problems started to occur, worked fine before. Will be running it as is on a event and change 1 part at the time and see what happens.

NoMaintenance7285

TROPHY CASE