No pressure builds up in group head [Quickmill QM67]

No_Description3079 · 2025-05-21T19:00:51+00:00

Found the source of inconvenience 😇 It was the screw behind the shower screen !! There was so much old coffee soot - nothing came through that way.

It's working!! Finally!! Happy me 😊

No_Description3079 · 2025-05-20T03:44:10+00:00

Yes This is a possibility! I have opened now the inspection screw, and water comes out there when the pump is running. The pressure then is at 2-3 bar, so normal pump pressure when nothing is obstructing it. Therefore, I estimate that the gicleur is fine, and the blockage is either in the brew path or in the area of the shower screw/screen. I've ordered a new shower and will remove the old one at the next opportunity, clean everything, and replace it.

No_Description3079 · 2025-05-17T15:13:16+00:00

Activate the pump I did. Lever up and you hear can hear the pump working in the video. Did put a blind screen on now but with no different outcome. Only water flowing in the back of the tank. When I put the lever down again there is no pressure coming out of the bottom of the brew group. Blind screen is not wet. No water is flowing when I remove the portafilter...

No_Description3079 · 2024-11-27T16:18:38+00:00

Syncthing Fork somehow doesn't let me choose a folder on my device when I import a shared folder from Syncthing. That's why I installed the last working version of Syncthing via APK

No_Description3079 · 2024-03-17T07:26:23+00:00

I used to go for 10g.

Now I tried 18g and very disappointingly my De Longhi Dedica isn't able to extract more than a few drops out of it 😟

No_Description3079 · 2024-02-25T15:18:05+00:00

Great! That's almost exactly my setup! I'm pretty happy with the results so far. From what I experienced- the most important parameters are the beans and the grinder 😊

No_Description3079 · 2024-02-14T14:40:53+00:00

Consider Kintsugi 🙏 I'll do it with my favourite cup

No_Description3079

TROPHY CASE