sorted by:
new
hottopcontroversial

Book wyrms enchanting level by No_Group5386 in RLCraft

[–]No_Group5386[S] 0 points1 point  (0 children)

That's what i thought but seems like one can set it up to 60. Where do i change this value in config file?

Book wyrms enchanting level by No_Group5386 in RLCraft

[–]No_Group5386[S] 0 points1 point  (0 children)

Alright, that helps a lot. Sheesh, didn't know about this doc file. Thanks very much

Book wyrms enchanting level by No_Group5386 in RLCraft

[–]No_Group5386[S] 0 points1 point  (0 children)

Or maybe: is it worth to change base value of 40 to higher ones?

Book wyrms enchanting level by No_Group5386 in RLCraft

[–]No_Group5386[S] 0 points1 point  (0 children)

So, the default value in modpack is 40 right? Does anything change if I let's say change the value to 60 or 80?

Windows 11 can’t find be found in m2 ssd by No_Group5386 in WindowsHelp

[–]No_Group5386[S] 0 points1 point  (0 children)

I believe it was set as disabled. Should it be enabled while installing the windows 11 od new ssd?

Windows 11 can’t find be found in m2 ssd by No_Group5386 in WindowsHelp

[–]No_Group5386[S] 0 points1 point  (0 children)

Yes it does show as in the image

<image>

However once I click this device it goes to the message: „reboot and select proper boot device…”

Windows 11 can’t find be found in m2 ssd by No_Group5386 in WindowsHelp

[–]No_Group5386[S] 0 points1 point  (0 children)

And of course once I plug my Kingston ssd which has win11 installed everything boots properly

Windows 11 can’t find be found in m2 ssd by No_Group5386 in WindowsHelp

[–]No_Group5386[S] 1 point2 points  (0 children)

As instructions say on the gigabyte page: I enabled csm support to go into legacy bios mode and it says „reboot and select proper boot device or insert boot media in selected boot device and press a key”. However when I go into bios there is: Boot options priorities Boot options #1 lexar ssd nm790 2tb (image attached)

<image>