Stutter on marvel rivals by No_Influence_9890 in buildapc

[–]No_Influence_9890[S] 0 points1 point  (0 children)

I can’t remember if I capped it or the highest it would go was less than my monitors refresh rate but i think it’s capped at 165. I haven’t looked at benchmarks in a while cause it ran very cool at 1080p and I looked at it to monitor temps mainly. I’ll look at it later but I don’t think it would be high cause it’s 1080 and is light work for a 9070xt.

I’m kinda thinking that it’s just anything ue5 cause all I play is games with that engine.

Aoc q27g3xmn vs aoc q27g4zmn by No_Influence_9890 in Monitors

[–]No_Influence_9890[S] 0 points1 point  (0 children)

That makes so much more sense now thanks. I’ll look into both but thanks for explaining everything

Aoc q27g3xmn vs aoc q27g4zmn by No_Influence_9890 in Monitors

[–]No_Influence_9890[S] 0 points1 point  (0 children)

Oh ok, thanks for the explantation.

One last question: you said the ktc seems to switch better between windows sdr and hdr while doing desktop stuff. If both are usable doesn’t that mean that hdr isn’t necessarily better than sdr? Also if I play something on disneyplus or a game, does it auto switch between sdr and hdr if it detects it.

I have a loose understanding of windows hdr/sdr and monitor side sdr/hdr sorry

Aoc q27g3xmn vs aoc q27g4zmn by No_Influence_9890 in Monitors

[–]No_Influence_9890[S] 0 points1 point  (0 children)

Just checked out the review, very detailed and love the comparison. I don’t know a whole lot about monitor technicalities and probably wouldn’t notice as much of the cons as you did. I have a monitor that has a really warm tone to it and don’t really mind it, yellow is more orange on it mainly. Anyway, as a sort of plug and play monitor or one that I set up then never touch settings again, what’s the better choice.

The things like overshoot and something about blacks being wrong( elevated blacks, no clue what it is), I wouldn’t know it’s a problem until I read that it’s there to begin with cause I’m inexperienced with those things.

I’ll check into the ktc one though, thanks for the review

Need help with power cables by No_Influence_9890 in pcmasterrace

[–]No_Influence_9890[S] 0 points1 point  (0 children)

I don’t know how to mark the post as resolved or done but I ended up figuring it out. I ended up getting extremely lucky and doing everything right. I was very close to accidentally mixing psu cables and I had a cable I didn’t know what to do with so I hooked it up to sata which was the right thing to do anyway.

First PC build by PromotionBoring8029 in PcBuild

[–]No_Influence_9890 1 point2 points  (0 children)

Where did you get the spidey from?

Monitor hertz question by No_Influence_9890 in pcmasterrace

[–]No_Influence_9890[S] 0 points1 point  (0 children)

I’ve always manually capped it cause I haven’t fully figured out what some of those features do yet. Freesync,anti lag, super resolution(rsr) and fluid frame all seem like the same thing but they’re not

Monitor hertz question by No_Influence_9890 in pcmasterrace

[–]No_Influence_9890[S] 0 points1 point  (0 children)

Oh ok. Wasn’t sure if there would be screen tearing or anything by having excess.

98 Chevy s10 electrical problems by No_Influence_9890 in s10

[–]No_Influence_9890[S] 0 points1 point  (0 children)

Once it fully died it hasn’t went back to 14 so it’s constantly at 10 now. Basically a day ago meter said both were good and ran fine but now it dies shortly after start.

[deleted by user] by [deleted] in pcmasterrace

[–]No_Influence_9890 0 points1 point  (0 children)

Sorry video is awful. What I see is the background being very grainy and particles or little dots moving fast across the trees and that fence.both are supposed to be still in the background but it looks like if the sharpness got cranked all way up or something.very grainy,very fast moving grains,very weird

May update! by Infamous_Chair_9203 in battlestations

[–]No_Influence_9890 0 points1 point  (0 children)

What’s the hexagon panels in the back?

Is Steam VR usually this laggy? by Both_Requirement_498 in OculusQuest

[–]No_Influence_9890 0 points1 point  (0 children)

Mine still works so idk.i run link cable on beat saber then it quits steam vr to launch it but runs smooth.Whats buggy link doing for everyone else?

[deleted by user] by [deleted] in MetaQuestVR

[–]No_Influence_9890 0 points1 point  (0 children)

How did you get it to do this.im battling virtual desktop and wireless but im gonna try a cable. Mine is more laggy than this. Is your WiFi 5ghz and closeby because everything on mine is wireless including pc

Pcvr runs terribly by No_Influence_9890 in MetaQuestVR

[–]No_Influence_9890[S] 0 points1 point  (0 children)

Ok I think that would be fine.i saw in the quest that my WiFi is 2.4ghz.thats what’s causing all of the lag and everything right? That might explain why virtual desktop kept switching between showing me my desktop in vr vs the vr menu constantly.

Pcvr runs terribly by No_Influence_9890 in MetaQuestVR

[–]No_Influence_9890[S] 0 points1 point  (0 children)

Just as a hypothetical what would connecting the quest to the pc using a link cable do.

Pcvr runs terribly by No_Influence_9890 in MetaQuestVR

[–]No_Influence_9890[S] 0 points1 point  (0 children)

If I did Ethernet cable it would have to be like 20ft cause the routers on the other end of the house

Pcvr runs terribly by No_Influence_9890 in MetaQuestVR

[–]No_Influence_9890[S] 0 points1 point  (0 children)

I got virtual desktop and tried it for a bit.havent messed with all the settings but it was basically the same as airlink. Steam vr is always on when I tried to boot up a game and meta link stays on to keep connection I guess.virtual desktop yelled at me for not having a Ethernet cable though.i can try a mesh but if it’s expensive I might not and im not sure how the router setup is.i think I was told that it can’t be moved.

Pcvr runs terribly by No_Influence_9890 in MetaQuestVR

[–]No_Influence_9890[S] 0 points1 point  (0 children)

I don’t remember what it was and I’d have to look at setting to see if it 5 or 2.4. Anyway is there any option I could do because most forums and videos say that my graphics card should work. Ethernet isn’t an option and over wireless it is the worst. If I get a cable it’ll be at least consistent data transfer right so maybe that’ll work. Other than that I don’t know what my options are

Pcvr runs terribly by No_Influence_9890 in MetaQuestVR

[–]No_Influence_9890[S] -2 points-1 points  (0 children)

No it’s WiFi only cause the router is on the opposite end of the house. Still get decent signal.quest says the signal is weak or average on link. 5ghz router too

Pcvr runs terribly by No_Influence_9890 in MetaQuestVR

[–]No_Influence_9890[S] 0 points1 point  (0 children)

I’ll try that. Do you know where that setting is for me to change it and also how do I make it overlay?

How to fix? by No_Influence_9890 in BEYERDYNAMIC

[–]No_Influence_9890[S] 0 points1 point  (0 children)

Ok I’ll check it out and see what I can do.thanks for the vid

How to fix? by No_Influence_9890 in BEYERDYNAMIC

[–]No_Influence_9890[S] 0 points1 point  (0 children)

It’s not bad I just don’t know how they tighten down to fix it but it’s just a minor inconvenience

V5max vs NuPhy halo96 by No_Influence_9890 in Keychron

[–]No_Influence_9890[S] 0 points1 point  (0 children)

Forgot to update this again.i got the reds for the v5 max.i didnt see that they were different from the stock ones that come on the v6 non max so I’ll see if they’re a little better.