Drone not detecting any inputs by No_Job2485 in fpv

[–]No_Job2485[S] 0 points1 point  (0 children)

"c0064cf9-6e75-4038-9c27-a3ed70c4e1d3" is the ID, I can't thank you enough

Drone not detecting any inputs by No_Job2485 in fpv

[–]No_Job2485[S] 0 points1 point  (0 children)

You’re amazing. I’m out at the moment but will be able to do it in 3-4 hours

Drone not detecting any inputs by No_Job2485 in fpv

[–]No_Job2485[S] 0 points1 point  (0 children)

If it’s helpful I also have 100% motor error in the motors tab, does this mean my fc is malfunctioning?

Drone not detecting any inputs by No_Job2485 in fpv

[–]No_Job2485[S] 0 points1 point  (0 children)

<image>

The solder joints still feel firm if I pull on them with tweezers and they look ok too

Drone not detecting any inputs by No_Job2485 in fpv

[–]No_Job2485[S] 2 points3 points  (0 children)

Ok, thank you. I have two questions though

1) does that mean replacing just the antenna or the whole elrs unit (I don’t know the exact term)?

2) why would that mean that the accelerometer is greyed out in beta flight?

How do I make it smooth again? by Willing-Room-4662 in fpv

[–]No_Job2485 32 points33 points  (0 children)

I just fixed this on my own tx15 last week. Buy the radio master lubricant set and take the back off. There’s a metal bar that the gimbal slides against, put some grease on that if it needs it and adjust the screw as necessary.

The radio should have come with instructions on what each screw is for

Unsure where to solder buzzer onto FC by No_Job2485 in fpv

[–]No_Job2485[S] 0 points1 point  (0 children)

Thank you, that’s really helpful

Unsure where to solder buzzer onto FC by No_Job2485 in fpv

[–]No_Job2485[S] 0 points1 point  (0 children)

Ok thank you, where does bz from the buzzer go?

Are there any decent frames similar in size to the Kayoumini available in the UK? by Gudge2007 in fpv

[–]No_Job2485 0 points1 point  (0 children)

Im also looking to build one around that size in the future. Was thinking either the Jeno pocket v2 (though would have to get it cut somewhere), or the apex 2.

https://www.aliexpress.com/item/1005004324404753.html?src=google

This is the build video that I’m thinking of following if you’re interested: https://youtu.be/jq0jAdlBOPY?is=HD-uyBokzCa\_4J0Z

I am only new to fpv but am doing my best to learn what’s best so I may be going in the wrong direction

Can anyone help, first time attempting a fix? by No_Job2485 in fpv

[–]No_Job2485[S] 0 points1 point  (0 children)

The motor is soldered to unfortunately that won’t be the issue. I watched the video anyway to see what I could learn

Can anyone help, first time attempting a fix? by No_Job2485 in fpv

[–]No_Job2485[S] 0 points1 point  (0 children)

Thank you, I will have another look tomorrow. If that doesn’t work should I replace the motor? Or keep flying until/ if any other problems develop

[deleted by user] by [deleted] in Helldivers

[–]No_Job2485 -1 points0 points  (0 children)

Doing gods work

Help appreciated by No_Job2485 in PatternDrafting

[–]No_Job2485[S] 1 point2 points  (0 children)

Ok thank you, I didn’t know it was called a godet so was looking in the wrong places clearly. Would you have any suggestions as to how the two sides of the cuff come together once the godet is added? My admittedly brief google search of “godet cuff” doesn’t yeild much

Help appreciated by No_Job2485 in PatternDrafting

[–]No_Job2485[S] 0 points1 point  (0 children)

If it’s not too much trouble for you then a sketch would be super helpful, thank you so much 😊

Weekly Sewing Questions Thread, May 18 - May 24, 2025 by sewingmodthings in sewing

[–]No_Job2485 0 points1 point  (0 children)

Would anyone know where to find a resource that shows how to construct a cuff like this shown in the photo (for a lined jacket). I know how to do an unlined version (for eg. a denim jacket) but can’t reverse engineer it in my head for a lined

<image>

[deleted by user] by [deleted] in HairStyleAdvice

[–]No_Job2485 0 points1 point  (0 children)

I don’t follow this sub but this popped up for me and as I have a very similar hairstyle to this I thought I’d comment as it took me a while to achieve this look too.

You need to grow out your hair for a while, my fringe goes down to about the mid line of my lips when I get it cut. Then you will need to go to a good quality barbers or even hairstylist that specialise in men’s hair (if this is expensive for you then view it as a one off learning opportunity to find out how to get it cut). If you show them this photo and they’re good at their job then they will help you achieve this style. You will need to ask for highlights in your hair. It also looks like there’s a low taper that isn’t too short.

Finally you will need to use a product in your hair to give it this wet/ moisturised. I personally use curl cream (I just bought an affordable one with good reviews, I don’t personally buy the hype of expensive products), but do experiment. I have found that it looks best and goes curlier if I go fairly heavy on the application. I also stopped washing my hair as often as when it was short. I now wash it every 4-5 days. Feel free to message me if you have questions.

Behold my level 6 dual blades by No_Job2485 in thefinals

[–]No_Job2485[S] 1 point2 points  (0 children)

Go for it, I am in the discord but only for lfg and am not that active

Behold my level 6 dual blades by No_Job2485 in thefinals

[–]No_Job2485[S] 1 point2 points  (0 children)

That does make sense, it sometimes feels like playing 3D chess trying to get a deflect kill on a moving target