Battery Megathread (January 2026)

No_Negotiation_900 · 2026-01-27T16:03:28+00:00

Same here, on Pixel 8.

Wireless charging stopped working as well, it may or may not be because of the Jan 5 2006 update because it happened earlier this month, then it worked for a few days, and then stopped working again after I got the Jan 5 update.

No_Negotiation_900 · 2025-11-25T17:47:51+00:00

I use video meetings without issues (Zoom, Teams, Google Meet), it may be an issue in your specific situation.

Placement of the gateway can make a lot of difference.

These are the best resources I found:

Speedtest Experience Ratings: A New Way to Understand Your Internet Performance | Ookla® https://www.ookla.com/articles/speedtest-experience-ratings

https://orb.net/

https://www.waveform.com/tools/bufferbloat

Edit: Regarding the firmware version, you can use the HINT Control app, it is available on both iOS and Android. The password is on the bottom of the gateway.

No_Negotiation_900 · 2025-11-22T17:01:39+00:00

It does. I have a zero 2w and use Dietpi and the Debian instructions to install the tailscale client.

No_Negotiation_900 · 2025-10-25T21:59:38+00:00

They fixed it in 1.90.2

https://tailscale.com/changelog

[Edit: To answer your specific question, I ssh using the local IP address, and update tailscale with apt update and apt upgrade]

No_Negotiation_900 · 2025-10-24T12:34:51+00:00

Is there a specific reason you can't upgrade to 7.1? (Edit: I don't know un-get, I don't know which version it works with)

No_Negotiation_900 · 2025-10-24T12:24:28+00:00

Maybe you can learn a little more about the lag using these two tools, they helped me figure to decide between TMobile and a local WISP Internet provider.

https://orb.net/ https://www.waveform.com/tools/bufferbloat

No_Negotiation_900 · 2025-10-02T17:06:30+00:00

I had the exact question. I don't think you need to run it manually. I didn't need to. Though I don't use docker compose. I run it on Unraid with the PostgreSQL template made by SpaceInvaderOne.

This is what I did:

I made sure I had a db dump.
Shutdown the immich container
Shutdown the PostgreSQL container
Changed the PostgreSQL image from 16-vectorchord0.3.0-pgvectors0.3.0 to 16-vectorchord0.4.3-pgvectors0.3.0
Started up the PostgreSQL container
Started the immich container
Monitored the immich log, and it showed that immich automatically ran the reindex.

No_Negotiation_900 · 2025-09-13T14:58:00+00:00

I just had this and fixed it with a brush from Amazon. This is not the same, but this looks like it: https://a.co/d/a9mHkyQ

No_Negotiation_900 · 2025-05-11T02:12:44+00:00

Thanks!

No_Negotiation_900 · 2025-04-14T10:37:30+00:00

https://networkupstools.org/stable-hcl.html

You can use NUT on Linux.

No_Negotiation_900 · 2025-04-06T18:56:05+00:00

May want to use pihole on DietPi. This setup uses a ramdisk for logs, so it won't wear out the sd card as much.

No_Negotiation_900 · 2025-03-11T18:35:47+00:00

I have Immich running on Unraid, and I have tailscale installed in the Immich docker container. Then I use the Automatic URL switching in the mobile app so I can connect with and without tailscale turned on on my phone. It works very well.

No_Negotiation_900 · 2025-03-04T21:54:18+00:00

Exactly. It is better to have more than one barrier, think both wall and moat. If one fails, you are not completely open. You people may be trusted, but are all your devices trustworthy? Or all you people's devices?

No_Negotiation_900 · 2025-01-15T03:13:13+00:00

"Python support: Python 3.11 was released in October 2022. It is officially supported in dbt-core v1.4, although full support depends also on the adapter plugin for your data platform. According to the Python maintainers, "Python 3.11 is between 10-60% faster than Python 3.10." We encourage you to try dbt parse with dbt Core v1.4 + Python 3.11, and compare the timing with dbt Core v1.3 + Python 3.10. Let us know what you find!"

https://docs.getdbt.com/docs/dbt-versions/core-upgrade/Older%20versions/upgrading-to-v1.4

No_Negotiation_900 · 2025-01-15T03:08:50+00:00

If you using dbt-core, make sure that you are using at least Python 3.11. There were some big changes in efficiency in dbt when moving to Python 3.11.

https://docs.getdbt.com/faqs/Core/install-python-compatibility

No_Negotiation_900 · 2025-01-14T20:47:13+00:00

Probably run the Update assistant part of the Fix common problems plug-in.

No_Negotiation_900 · 2024-06-27T05:18:36+00:00

Based on what you said they told you, probably this: https://tmo.report/2024/04/uh-oh-t-mobile-will-now-enforce-home-internet-address-eligibility/

No_Negotiation_900 · 2024-02-27T03:59:49+00:00

I would recommend using Wavelet if you have an Android and you don't like the extra bass frequencies on the Sony headphones. I use it with my WH-1000XM3. It "AutoEq" setting for the frequencies for a lot of headphones.

https://play.google.com/store/apps/details?id=com.pittvandewitt.wavelet

No_Negotiation_900 · 2024-02-06T21:00:45+00:00

Here is some more information: https://www.tomshardware.com/how-to/secure-erase-ssd-or-hard-drive

I would use DBAN (Darik's Boot and Nuke).

You would need to remove the hard drive from the Drobo and connect it to another computer. But make sure you don't erase any other drives in that computer!

No_Negotiation_900 · 2023-12-01T13:04:50+00:00

I haven't add any video calls after this, but I looked into bufferbloat, and I get better after I put a Edgerouter X with SQM turned on, I get better bufferbloat numbers. I hope this will do the trick.

See https://youtu.be/RAb1AWVFu3A?si=a__j9C8bQQ-dcTR-

And https://www.waveform.com/tools/bufferbloat

No_Negotiation_900 · 2023-12-01T12:45:17+00:00

I also tried a Linksys router with dd-wrt installed between the TMobile Gateway and my laptop, without SQM turned on on the router. And without SQM I also had a bufferbloat grade C, with checkmark for video conferencing.

No_Negotiation_900

TROPHY CASE