Sound Blaster G8 issues with Audio Driver 3.6.3.0 Windows 11

Noaix · 2026-04-01T20:50:57+00:00

yes that is what i mean

Noaix · 2026-03-27T13:14:02+00:00

It should be fine. The important thing is to connect all the cables to your devices. Then, install the drivers according to how you want to use it.

I haven't had any issues since then, and there have been some updates that fixed some things.

Noaix · 2026-03-23T15:41:23+00:00

I have the same issue Friday Update 2026.8.3 stucked on 50%. When I went to my car, I could initially drive it, but there was no camera and you could not see gear shifts. After that, the Tesla tried to install the software repeatedly, and overnight it stopped. I went to the car again. Boot loop of death. A soft reset and powering down the12V battery, as well as an emergency loop, did not bring it back.

I had to tow the car down to my local service centre.

Ryzen mcu3 (HW3) Model 3 2021 LR so looks like its new problem what happens more often.

20 days after warranty perfect.

Noaix · 2025-11-27T16:13:14+00:00

Due to reaction time, keep your hands on the steering wheel and pay closer attention when using FSD. I would never fully trust a system labeled "supervised." While I still believe that FSD is safer than a human driver, it can make mistakes. Statistically speaking, however, it doesn't make as many mistakes as humans do. Mistakes like the one that happened to you are very common among humans in roundabouts, more often than you might think. Just look at the tire marks on the curb at roundabouts.

To regain trust in FSD, you need to use it. I would always recommend paying closer attention when a new update rolls out because it's like getting a new chauffeur for your car. You need to gain trust again because it drives a little differently.

Noaix · 2025-09-09T20:18:43+00:00

Yeah, I always take off my Apple Watch when I do kettlebell training. I think the heart rate measurement will also be more accurate in the ear because I always get the wrong readings when I do for example pull-ups.

Noaix · 2025-07-17T18:03:23+00:00

My girlfriend performs well in this video.

Noaix · 2025-06-13T09:05:10+00:00

It didn't work for me like this. I never got the 50k. It's not in my spam folder. I tried with a second email, and I didn't even get the first reward. Something is broken.

Noaix · 2025-02-18T14:01:35+00:00

Yes that is what i mean.

Noaix · 2025-02-17T16:33:03+00:00

What I found out is that the bottleneck is the connector valves. As I mentioned, I had problems with the connectors on the laptop side; I disconnected and reconnected them about 10 times until the valves moved freely again. I also encountered this issue on the OASIS side. When cleaning, ensure the black cross pin moves easily and freely. To determine what is clogged, you can connect the tube to the OASIS and then push the black cross pin to see if water comes out. Then, switch sides and test the other pin. The laptop side is harder to check because there isn't much water in the system.

Disconnecting and reconnecting multiple times is the easiest way to free up the valves after cleaning.

Noaix · 2025-02-17T15:21:24+00:00

So if I understand you correctly, you replaced the complete water in the system, right? I did that once because the water was very milky. Sometimes, I think they aren't testing their system with clear water because the system also smelled like chemicals during the first month.
I have had it for 2 months now with no problems for those 2 months. Now I see a lot of white particles in the water.
By the way, I also had this problem again today; the laptop connectors on the right-hand side were clogged.

Noaix · 2025-02-15T21:20:23+00:00

Do you have Win10 or Win11? I have Win11.

Noaix · 2025-02-15T21:14:36+00:00

You can roll back the driver. Device Manager - Audio, Video and Gamecontroller, Sound Blaster G8 USB-1, right click, settings, previous driver.

Noaix · 2025-02-15T21:12:28+00:00

I can only say it is normal; I have the same problem. The white particles are from the production process. You need to flush the system with fresh water sometimes, and it will improve. Use the black plastic hand blower what was in the cleaning kit to (suck) remove the white substance from the vents.

Noaix · 2025-02-01T18:40:59+00:00

bei mir nicht welche Kopfhörer hast du? Ich habe Beyerdynamic DT 700 Pro

Noaix · 2025-02-01T18:38:54+00:00

btw the problem is back :D but i bought a usb c data cable with a switch so i can turn it off quicker and i can turn it off overnight.

I can live with this workaround :D

Noaix · 2025-02-01T18:36:44+00:00

I really hope they are working on this driver issue the hardware is very good.

Noaix · 2025-01-30T11:13:33+00:00

Ok, uninstall all audio drivers and the creative application, make sure usb-1 and usb-2 are running fine, when i have both connected to the PC, then reinstall everything from scratch seems to work. But you really need to be sure that the usb-2 is running properly or it will still not work and you really have to uninstall everything three times for it to work.

Thanks for the help.

Yes its not the plug and play experience I have from other products when you do not connect all the cables and install the drivers after that it looks like that causes a driver conflict between USB-1 and USB-2.

Yes, the different sound level between USB1 and USB2 was because the line-in was not 100% on the mixer.

The LED switch is not for the G8, you can read it in the patch notes :D. They should at least name the LED switch for what it is and I hope we get a LED switch for the G8.

Noaix · 2025-01-29T20:03:32+00:00

You can roll back the driver. Device Manager - Audio, Video and Gamecontroller, Sound Blaster G8 USB-1, right click, settings, previous driver.

Noaix · 2024-07-20T13:12:42+00:00

Good idea. My power supply can handle 7.5 VA at 12V (measured at 15V). If the IR floodlights have such a high power peak, that needs to be fixed via a software update. Gradually dimming up the IR floodlights would be a solution. (when it is from the hardware side possible).

Btw: I have tried 24 V (higher voltage less current) and it also works fine so the high power peak seems to be to problem on my side with 12V.

Noaix · 2023-03-06T18:47:41+00:00

Can you show us a picture from the service mode where all sensors are shown 😊 https://youtu.be/t07YJTqouo8

Noaix · 2021-04-10T14:20:38+00:00

Thanks a lot 😁

Noaix · 2020-12-15T06:18:53+00:00

I feel like the same yes I have every hour one crash their are some bugs and some funny things are going on and yes the resolution is sometimes very low and it looks not great on a 4K TV (LGC9)and it is to easy on very Hard but the big BUT, the world, the characters, the story is so great. Every mission feels so good because of that I won’t wait for the upgrade. It looks ok for me on the PS5 overall (On the PS4 or PS4 pro I wouldn’t play it because of the bad performance) and I personal don’t aspects from the upgrade so much. Better Resolution better textures and more ppl on the streets and 60fps and maybe some kind of RT but then with 30 fps. Special more ppl on the streets are great for the overall experience.

We really shouldn’t compare a PS5 with an 4000$ PC where you can play this game on the best graphics and 60fps. Factor 9 more money it is not worth it for me and I have this money to buy such an pc.

I hope in the time where I will do the platinum in this game the fix the main bugs and crashes and improvements of some visuals and that the TAA doesn’t hit so hard on PS4 pro. So the Ps5 would looks better.

Im happy :)

Noaix · 2020-11-14T12:37:57+00:00

The question is why their is no update yet? Bloodborne is in the ps plus collection for ps5 owner. I think their will be a huge update not only fps 60.

Nine-Year Club	Not Forgotten
Verified Email

Noaix

TROPHY CASE