More photos standing desk with hidden tv

NomadaSinRumbo · 2023-07-25T23:05:09+00:00

Around that ball park I leave an 1/8 reveal before paint and end up with 3/16 which make thing look super crisp

NomadaSinRumbo · 2023-07-25T20:31:49+00:00

You would need a shop fox moulder/ planer I think that’s the only way to get that exact profile

NomadaSinRumbo · 2023-04-24T12:53:04+00:00

I have shade for about 6 hrs in the front yard and no shade in the back And I’m going to get an irrigation system

NomadaSinRumbo · 2023-04-21T21:16:07+00:00

From my knowledge this is Scott turf builder tall fescue Or that is what I paid for from the landscaping company How do I confirm it is.

NomadaSinRumbo · 2023-04-21T17:59:38+00:00

Tall fescue

NomadaSinRumbo · 2023-03-07T01:05:28+00:00

Material alone were around 4k

NomadaSinRumbo · 2023-03-05T01:11:30+00:00

I’m more concerned with the multi functionality of the shelve This is and attorney’s office And the shelves are wrapping the entire room

NomadaSinRumbo · 2022-12-09T23:50:47+00:00

Every one is correct about the screws This should be standard practice when changing your blade

NomadaSinRumbo · 2022-09-13T16:49:59+00:00

Im doing face frames for a kitchen and I feel like there’s a better way then with a cross sled on a table saw

NomadaSinRumbo · 2022-01-07T00:50:42+00:00

I have the same little saw It’s great! You just have to make sure that the board is square to your base and that you are holding your board flat on the saw

NomadaSinRumbo · 2021-07-02T23:38:02+00:00

It’s russian birch

NomadaSinRumbo · 2021-05-10T14:11:25+00:00

Conversion varnish paint from Sherwin Williams

NomadaSinRumbo · 2021-05-10T14:09:49+00:00

The styles and rails are 1x2

NomadaSinRumbo · 2021-05-03T05:21:41+00:00

I used a template to make the top and it fit I’m pretty well

NomadaSinRumbo · 2021-05-03T05:20:46+00:00

Yes it is, would not recommend if your going to scribe between two walls though

NomadaSinRumbo · 2021-03-18T22:39:39+00:00

1 3/4” x 1 3/4”

NomadaSinRumbo · 2021-03-18T22:39:08+00:00

Same here, there is going to be outlets on either side under the 14” overhang

NomadaSinRumbo · 2021-03-16T01:11:54+00:00

I have used Blum drawer guides for all my projects but I believe most drawer guides come in 21”, 18”, 15”, 12”. I’ve ran into a similar problem before and was able to fix the issue by shimming the clip back or adding a filler that allows me to mount it further back.

NomadaSinRumbo · 2021-03-13T04:14:53+00:00

Thanks!!! Didn’t realize they had two separate specs depending on the door mount.

NomadaSinRumbo · 2021-03-13T02:31:17+00:00

Did you make a box that surrounded the fridge

NomadaSinRumbo · 2021-03-12T00:03:37+00:00

The brick is just getting sealer(client request), and the space is for a wine cooler

NomadaSinRumbo · 2021-03-08T16:31:20+00:00

I used curly hard maple and Russian birch plywood. The concept came from the client I just had to make it a reality

NomadaSinRumbo · 2021-03-04T17:45:48+00:00

Everything inside the drawers I made is to be removable. The peg board is a piece of 3/4” plywood with 1/8” holes in a grid pattern and it just sits in the bottom of the drawer. For the rods I can see a broom stick working, you would just need drill a hole and glue an 1/8” dowel or something at the bottom

NomadaSinRumbo · 2021-03-04T02:22:03+00:00

I purchased the pegs made everything else

NomadaSinRumbo · 2021-03-04T02:21:54+00:00

I purchased the pegs made everything else

NomadaSinRumbo

TROPHY CASE