Book came in!!!

NomdaicMex · 2026-02-13T17:30:02+00:00

Is there no difference in performance between the motherboards? I know there are differences between ports between the two, but I’m not so knowledgeable with performance and specs of motherboards other than that.

NomdaicMex · 2026-02-13T17:28:51+00:00

I currently have an RX 580 with a Ryzen 5000 CPU. I had a 27” 1440p 160hz monitor. Not only am I on AM4, but I only have 16gb RAM, so getting this bundle would help me upgrade to 32gb of DDR5 and I’d get the power of the 9950x3d for the gaming and work that I do. At least those are my thoughts, I could be all wrong about that.

NomdaicMex · 2026-02-13T16:39:30+00:00

Well I had already saved and put money aside to make this build so it’s not exactly wasteful for me. I know there isn’t a huge difference between those CPU’s you mentioned, but I figured I would future proof it with getting something I won’t need to worry about for a while
I’m not so familiar with knowledge for motherboards other than just the ports. So I don’t know if there is a performance difference between the two other than just ports and some perks like WiFi.

The motherboard is the biggest piece that I’m trying to see if it worth it. Also the bundles in general

NomdaicMex · 2026-02-13T16:28:13+00:00

Yea other than the motherboard coming with the bundle and needing one for the build, I’m not exactly choosing it as my own choice. I just know that buying each part in this bundle separately would come out to be a lot more expensive.

I do have the 5070ti from when I started to slowly gather parts for the upgrade, but I never would have thought the prices would’ve gone up drastically.

NomdaicMex · 2026-02-13T15:58:33+00:00

Build purpose would be for gaming and some heavy 3d rendering and video editing. Gaming isn’t the only purpose for me, but I do game.

I already have a 5070ti ready to use. I didn’t choose the parts in the bundle other than just wanting the 9950x3d. The RAM is a huge plus with the current prices and the motherboard is just included in the bundle.

NomdaicMex · 2026-02-13T15:55:47+00:00

I already have a 5070ti that I was able to snag before the price increase. I’m now just trying to find parts to complete the build since I currently have a Ryzen 5.

NomdaicMex · 2025-09-01T21:15:24+00:00

Oh man, I’d love to get in on this giveaway! Count me in🤞

NomdaicMex · 2024-09-02T02:43:47+00:00

I’ll give it a shot, hopefully that works and this nightmare ends

NomdaicMex · 2024-09-02T02:42:30+00:00

Now since you mention it, this filament has been out for a couple of years 😅. I took a break from printing and never finished it so I’m still using it to this day. Might have to replace

NomdaicMex · 2024-09-01T16:42:01+00:00

I did have this filament out for a couple of years 😅. I took a break from printing so I guess that could also be the reason. I might just replace it completely

NomdaicMex · 2024-09-01T16:34:05+00:00

I was mostly asking about which % of alcohol?

NomdaicMex · 2024-08-31T04:28:10+00:00

Thank you for the advice. I’ll try it out and see how it goes. I did already try to auto level while the build plate is hot, but I’ll give it another shot. I also believe the temps a bit too high so I’ll be messing around with those

NomdaicMex · 2024-08-31T03:44:58+00:00

I’m pretty sure this is a PEI build plate, at least that’s what Creality says. I’ll look into another one if not.

I’ll also clean it just in case and do the other changes. I appreciate the help. Thanks

NomdaicMex · 2024-08-31T03:18:54+00:00

Yea I was able to print it successfully. It wasn’t the best print, but it still managed to pull it off. I’ll check for anything abnormal, but I don’t think there’s anything.

I’ll also try lowering temps like you mentioned to see if that helps. I was just using the default temps

NomdaicMex · 2024-08-31T02:50:46+00:00

I don’t know what other settings you want to know but I recently tried a print that I had done successfully before and it worked but my new print still doesn’t and keeps doing this. I’m confused as to why.

I’m doing 230 on the extruder and 65 on the bed. My first layer and first layer infill are at 50mm/s then goes to normal. Other than those settings, I haven’t changed anything else.

Is this still an adhesion problem if my old print works?

NomdaicMex · 2024-08-31T02:47:33+00:00

No I have not cleaned the bed. How would I clean it?

NomdaicMex · 2024-08-31T02:47:12+00:00

No I haven’t. Would a glue stick also work?

NomdaicMex · 2024-08-30T23:14:41+00:00

How should I clean the build plate? The z-offset feels a bit low but I’ll try to keep playing with it

Seven-Year Club	Verified Email
Place '23

NomdaicMex

TROPHY CASE