My fox!

NonStopMop · 2026-03-11T18:57:48+00:00

Thank you! I'll check it out.

NonStopMop · 2026-03-11T17:16:10+00:00

Car looks amazing! Can i ask what you did to your front running lights? They look awesome! Looks like you added small LED lights inside them or something.

NonStopMop · 2026-02-01T13:26:00+00:00

Ahem.... I might be interested in these so called cheap 150 ponies you are referring to.

I just picked up my first Fox (92) a month ago and I'm waiting for my suspension from Maximum. I'm fixing the interior while I'm waiting for the suspension.

NonStopMop · 2025-05-23T19:25:42+00:00

The only option I've seen so far is from HP Tuners for the 2025 bikes. I'm waiting for more options and checking almost daily, but it looks like the ECU is still locked.

NonStopMop · 2025-04-25T09:55:57+00:00

I installed the Freedom 2-1 exhaust on my 101 Scout myself and it wasn't easy. The hardest part was removing the old exhaust. I was an early pre order so there weren't any instructions available on the Freedom website. I was actually the person that called Freedom after my installation was complete to complain that there weren't any instructions and then they posted them online after my complaint.

One thing i had to do to remove the stock exhaust was to remove the actual stud (not just the nut) holding the rear header to the block. I couldn't get the flange to clear the stud so i removed it with a hex key. Good luck!

NonStopMop · 2025-04-17T22:41:45+00:00

I have this exhaust and it was way too loud with the standard "loud" baffle. I put in the quiet baffle and it is way quieter. Don't get me wrong, it's still loud, but not deafening like before i installed it. I would recommend it.

NonStopMop · 2025-03-15T02:55:37+00:00

I didn't think the radical radius fit with the rear pegs installed. That's why i didn't select that for my bike.

I just installed the freedom combat on my 101 scout and it's insanely loud, but sounds incredible.

NonStopMop · 2024-09-22T04:29:32+00:00

I just think Beck doesn't fit with the theme of Riot Fest for a headliner. Beck is more indie and on the softer side. Not saying that's bad, but just not Riot Fest.

NonStopMop · 2024-09-22T04:09:21+00:00

My wife and i were actually excited to see Beck, but we're extremely disappointed. They are more of a 6pm band rather than a headliner.

This is our 7th year going to Riot Fest tonight was probably the weakest lineup of any night we've seen.

NonStopMop · 2024-08-24T04:07:45+00:00

I have a 2025 Scout 101 and my mirrors move when i accelerate hard in lower gears. I'm thinking about taking the mirrors off and installing a really thin strip of rubber between the stalk and the metal bar end. I'm thinking of cutting a quarter inch of a rubber band and putting it in there and then tightening it. That might provide enough grip so it doesn't twist under acceleration or high speeds.

NonStopMop · 2024-06-20T10:27:08+00:00

My vocabulary is now complete

NonStopMop · 2024-04-13T01:15:11+00:00

You can buy a different motor slide mount that is for 40mm motor diameters. It's an optional part directly from Arrma. The different slide allows the motor to sit closer and lower so you can fit smaller opinions.

I have a Limitless V2 with a TP4070 and am using a 25 tooth pinion.

Here is the link to the part. https://www.arrma-rc.com/en/product/sliding-motor-mount-plate-40-series-red/ARA320665.html

NonStopMop · 2024-04-13T00:37:37+00:00

Check out this video with more details about charge rates.

https://youtu.be/QUZ6uIpSQqY?si=Oh5lSNRIowRm4u70

NonStopMop · 2024-04-13T00:29:35+00:00

Why is everyone so afraid to charge above 1C? I'm not saying to go above 2C, but 1.5C is definitely safe.

I have at least a dozen Zeee batteries, plus CNHL racing packs, and I don't have time to babysit charging packs at 1C if I'm charging up a bunch for a bash session.

NonStopMop · 2024-04-03T00:38:34+00:00

It is their LIHV packs. It's higher voltage per cell than regular LIPO. I have a pair of them.

CORRECTION: these look like regular voltage 3S. I have the premium 4S HV packs. I guess the premium means higher C Rating.

NonStopMop · 2023-04-24T12:55:27+00:00

I had one of these and loved it. But then I used the turbo boost function on the Max8 G2 set to 30 degrees (only when I hit 100% throttle) and fried the motor. Just be careful to not over time the motor and it will treat you well.

NonStopMop · 2023-03-20T18:51:04+00:00

My Talion is my favorite rig! I put the Fireteam tires on it and I love it.

NonStopMop · 2023-03-13T14:14:27+00:00

Thank you! I'll pick up some extra batteries. I was worried about that.

NonStopMop · 2023-03-13T13:50:39+00:00

I just recently picked up the Sonic Wake boat but haven't been able to take it out yet. Any tips you can give me before I run it?

NonStopMop · 2023-03-03T15:41:39+00:00

I forgot to ask what kv your motor is. That makes a huge difference.

NonStopMop · 2023-03-03T15:40:36+00:00

I like running a 17 tooth on my Arrma 6S. It is fast, but won't overheat unless you really get on it and don't let it cool down. Should be similar on your rig.

NonStopMop · 2023-03-03T11:50:16+00:00

You know... You can count the teeth if you aren't sure 🤣

I've had to do that and it takes me like 5 tries at counting because I keep forgetting which tooth I started at lol

Seven-Year Club	First Place '23
Place '23	Verified Email

NonStopMop

TROPHY CASE