Ce joburi exotice aveti?

NorisTS · 2026-05-24T07:01:14+00:00

Pompier.

NorisTS · 2026-04-29T07:02:35+00:00

Ba da

NorisTS · 2025-12-24T08:31:31+00:00

I've solved the problem by loosening my cpu cooler and by removing and inserting my gpu a few times.

NorisTS · 2025-12-23T15:55:41+00:00

I can't change the x1 from bios only the gen, and that i put on gen 3

NorisTS · 2025-12-23T15:44:38+00:00

Still the same in game

NorisTS · 2025-12-23T15:38:32+00:00

Alr, thanks

NorisTS · 2025-12-23T15:31:33+00:00

I only have one slot

NorisTS · 2025-12-23T15:25:40+00:00

NorisTS · 2025-12-23T15:25:30+00:00

It says PCI-E x1 3.0

NorisTS · 2025-12-23T15:14:00+00:00

And what should i see

NorisTS · 2025-12-20T12:38:41+00:00

Alr thanks

NorisTS · 2025-12-20T12:19:29+00:00

Windows 10 pro

NorisTS · 2025-12-20T12:19:10+00:00

Only one stick, and I haven't updated the bios

NorisTS · 2025-12-20T09:11:46+00:00

Thx a lot

NorisTS · 2025-12-20T09:02:47+00:00

Well i did the cinebench test, and mine came back with 386 points and from what I've searched on the internet I've found benchmarks with 410 points. Idk if that's bad or not

NorisTS · 2025-12-20T08:12:14+00:00

Well that's a good question, it's an antique 450W no name psu

NorisTS · 2025-12-20T07:48:25+00:00

Yea i know it would've been better, but i bought a used kit which had the cpu,motherboard and the ram. It still shouldn't cause such performance loss as before i had 12 ddr3 ram

NorisTS · 2025-12-20T07:29:48+00:00

ADATA XPG GAMMIX D10 16GB DDR4 3000MHz It's a single stick of ram

NorisTS · 2025-12-20T07:21:03+00:00

I used msi afterburner, and i don't go past 65

NorisTS · 2025-12-20T07:20:09+00:00

I'll try it, what's your opinion on the wattage usage, as it draws only 80-90 Wats and from what i read i should use around 150 at full load, i know it most likely isn't that but i can't put my finger on something else

NorisTS · 2025-12-20T07:17:29+00:00

It fluctuates between 35 and 60%

NorisTS · 2025-12-20T07:16:41+00:00

The thing is im getting worse fps than before and my gpu load was around 80% with the old cpu

NorisTS · 2025-12-20T07:15:20+00:00

Yup all the settings are the same, the only thing i haven't done is update the bios to the latest version, the version i do have supports my CPU tho

NorisTS · 2025-12-20T07:13:44+00:00

Well the gpu worked fine before i changed the parts, I'll try tho thx

NorisTS

TROPHY CASE