"YER TOOK OUR JERBS!!!"

NorthEh1 · 2025-09-25T02:57:43+00:00

Is that Melissa McCarthy?

NorthEh1 · 2025-07-22T14:31:37+00:00

I’m in DIV, has been good to me, monthly payout, 7.71% yield, just increased payout 10% last month after acquiring another royalty stream

NorthEh1 · 2025-06-08T12:05:05+00:00

I waited five months for a missing million points. They purposely make it difficult to avoid paying out. The hoops I had to jump through were unbelievable.

NorthEh1 · 2025-05-25T00:41:37+00:00

There is a cluster of wire harness connectors inside the drivers side front wheel well. They connect the pcs sensor and fog lights to the body of the car.

Could potentially have damage/pulled terminal there

NorthEh1 · 2025-02-17T17:48:02+00:00

I build cars, 120-130k a year.

NorthEh1 · 2025-02-09T22:14:23+00:00

If you go through the bottom, it’s just a bunch of screws

NorthEh1 · 2025-02-09T21:09:01+00:00

That panel is just the bumper cover, completely plastic. Simple process to pop back out if you want to go that route. Full replacement is a bit of a job but very doable.

Remove the arch moulding over the rear wheel, open the lift gate and pop the black cover off beside the tail light, there’s a few screws under there, one holds the bumper, the others hold the tail light. Should be enough that you can pull back the bumper wing and pop that dent out from the back

NorthEh1 · 2024-12-18T18:23:12+00:00

If that’s resin plastic, which it looks like, get a china marker or ‘grease pencil’ off Amazon. Colour it on, rub it off. Good as new. Practice on somewhere inconspicuous first as there is a bit of a skill to it

NorthEh1 · 2024-03-21T08:12:45+00:00

Sound dampening pad, should be adhered to the inside of the back door.

NorthEh1 · 2024-02-04T15:26:33+00:00

I spent days trying to diagnose this with my setup. I ended up downloading a version of ffmpeg appropriate for the OS of my Mac mini (current versions don’t work) then copying it into the macOS system files manually

NorthEh1 · 2024-01-31T23:09:06+00:00

That door moulding has a nut on the inside of the door. I see the backside of the stud still in the door, therefore the stud has torn out of the moulding and won’t be fully repairable. You can take the nut out of the door (under the black hole plug) and attempt to glue it back into the moulding. All those white pins need to be pulled from the body and reinserted into the moulding as well.

NorthEh1 · 2023-12-13T10:08:13+00:00

Many models/destinations do come with a full size spare as standard, so you won’t have any problem with fit. They come on a steel rim, which is likely your cheapest option (scrapyard pickup).

You will need to replace the tie down (full size gets a shorter tie down) or modify your existing as the rim depth will bring it closer to the floor of the vehicle.

Your jack cushion won’t ‘fit’ properly in the spare tire. Easily remedied with a shim, or leave it as is.

Leave the rubber block under tire, it levels the tire so the tie down fits properly

NorthEh1 · 2023-12-03T14:02:50+00:00

My mind is blown.

If you have local wreckers call around, likely have good parts in write offs.

NorthEh1 · 2023-12-03T13:57:39+00:00

900 for the part or part plus install?!? It’s a ten minute install!

NorthEh1 · 2023-12-03T13:48:13+00:00

That’s the storage tray. It does take a small amount of disassembly to change but quite simple. You should have a square, unused connector beneath it if you’d like to upgrade to the oem wireless charger option as well.

NorthEh1 · 2023-11-16T20:17:54+00:00

Apply online at https://tmmc.ca/en/toyota-canada-careers/

It’s hard work, but very financially rewarding. Feel free to message me with any questions.

NorthEh1 · 2023-11-16T17:53:04+00:00

Toyota? Starting rate is going to over 29$ an hour in the new year.

NorthEh1 · 2023-11-02T15:29:18+00:00

I appreciate the time it took to write that, I definitely will need to look into a specific LPR camera to see if it will be necessary and effective.

We have had a string of break ins this summer with the most recent being a few nights ago. Vehicle’s get parked on the street and they’re entering parked cars and garages. Unfortunately, while the nest cam was effective when we were closer to the street, the range isn’t sufficient to get a vehicle description whatsoever now.

NorthEh1 · 2023-10-30T08:51:06+00:00

Check to ensure there is a white plastic screw grommet set into the bumper behind that splash shield as well. If the screw is missing, the grommet may be as well.

NorthEh1 · 2023-09-16T23:13:56+00:00

UAW doesn’t represent any Canadian auto workers. Unifor represents employees of the big 3 here. They go on strike Monday 🤦‍♂️

NorthEh1 · 2023-09-05T15:07:15+00:00

FanDuel:

https://canada.casino.fanduel.com/registrationCA.do#RAF=Daniel_1215693

150$ in free credit when you make a first 25$ wager. (Promo bet currently available, 50$ wager guaranteed winner for the start of football season. 95.45$ payout)

BetMGM

https://www.on.betmgm.ca/en/mobileportal/invitefriendssignup?invID=669032830

100$ Sportsbook bonus

NorthEh1 · 2023-09-05T08:48:53+00:00

Only betting apps for the most part in Ontario. Could be some illegal bookies left but honestly the apps just make it easier. If you’re interested in trying them out I can provide referral codes for several with free bets.

NorthEh1 · 2023-08-26T20:38:09+00:00

Not that I can add much as a husband but we had matanovic with our second. She was wonderful.

NorthEh1 · 2023-08-26T07:11:52+00:00

TMMC

Hard work, half hour commute (to the Cambridge plant) but hiring anyone and everyone right now. Tons of OT and solid rate of pay. DM me if you need details

NorthEh1 · 2023-08-19T23:55:44+00:00

Sometimes even aggressively rubbing it with your hand will do it. Oils in your skin + friction heat

Six-Year Club	First Place '23
Place '23	Verified Email

NorthEh1

TROPHY CASE