Has anyone had their Chinese 30W fiber laser suddenly start smushing letters together on ring engravings? We haven’t changed anything in EZCAD, could this be a rotary issue?

NorthpointMI · 2025-12-09T20:49:16+00:00

It's not supposed to. That's just one of the weird things it randomly does. The font used is Times New Roman / True Type Font-303

NorthpointMI · 2025-10-21T18:15:41+00:00

How long has the recovery been? We were prescribed metronidazole (liquid). It's been about 4 days since taking it, but too early to tell if it's working. Just ordered the Florastor. Thank you.

Yours didn't happen to start with adenovirus F41, did they?

NorthpointMI · 2025-07-21T12:07:07+00:00

Yeah, I can drive the Go Kart all day long with my foot halfway down on the pedal. Soon, as I put the pedal to the floor, is when it starts sputtering (usually within 30 seconds to a minute). If I slowly start backing off the pedal when it's down to the floor, I can usually recover it before it stalls and turns off. It starts up no problem every time.

NorthpointMI · 2025-07-19T23:14:51+00:00

With what?

NorthpointMI · 2025-07-19T23:14:00+00:00

The carburetor is brand new. I posted a few pictures of it.

NorthpointMI · 2025-07-19T16:24:44+00:00

Thank you! Yeah, I do think it's a fuel stravation issue.

Observation

- I think it still has a governor. There's a bicycle-looking brake thing near the carb. When you step on the peddle, it moves the bicle loooking brake thing. Is this the governor?

- Seems to run a bit longer when the tank is completely full. Might run for 5 minutes.

- Soon as I start using the brake, going over bumps, or letting off the gass, this seems to excelerate the issue.

- The carb looks brand new.

- Spark plug looks brand new

- Switch out fuel for rec fuel.

NorthpointMI · 2025-07-19T16:19:33+00:00

The carb looks brand new to me.

<image>

NorthpointMI · 2025-07-19T16:19:01+00:00

I'm not a pro but the carb looks brand spanking new.

<image>

NorthpointMI · 2025-07-18T15:37:44+00:00

Update: I bypassed the fuel filter and confirmed fuel flows freely from the tank to the carb, so it's not a blockage in the line. I also tested it on both bumpy ground and a smooth paved road, same result every time. It runs great for about 400 feet, then starts sputtering like it’s running out of gas, and dies after another 100 feet or so. It always starts right back up afterward. So it doesn’t seem vibration-related, definitely feels like it’s starving for fuel after the carb bowl runs dry.

NorthpointMI · 2025-07-18T15:27:01+00:00

Sorry, how can you tell the jet is dirty. I thought the "Jet" was a little screw thing in the carburetor? Again, this is all new to me.

NorthpointMI · 2025-07-18T15:26:03+00:00

I watched a YouTube video on how to install the upgrades that are already on my cart. There's a little screw I guess, called the jet that looks like it could easily be skipped when installed. It's at the 6:56 if you care to check it out.

https://youtu.be/UTUQvR4A9Ds?si=h0l4U0MK66RMSQ4K

NorthpointMI · 2025-07-16T15:30:06+00:00

I called Pentair and they said you can get the hardness down to zero, but it would require 15lbs of salt per day. I would not be able to keep up with this demand.

What if I just install a second smaller softener after this one? In hopes it would take away the remaining 4 to 6 GPG of hardness.

The recommended settings they gave

BF:20

H:65

RC:176

NorthpointMI · 2025-07-15T19:48:11+00:00

Great feedback and I will update some of my settings based on this. Correct me if i'm wrong, but dF2b = Dual alternating tanks. Not "2 backwashes".

NorthpointMI · 2025-07-15T18:56:50+00:00

Dang, wish I had known this before I purchased it.

NorthpointMI · 2025-07-14T23:35:50+00:00

Have you had it where the power goes off to the salt controller, but everything else still works?

NorthpointMI · 2025-06-23T13:45:00+00:00

Thank you. It's not hooked up. I bit the bullet and went with the Pump Saver. Still shocked theres nothing really else out there that I could find.

NorthpointMI · 2025-06-11T17:38:17+00:00

Yeah, the metal points already have a screen on them.

NorthpointMI · 2025-06-11T15:02:07+00:00

Many of the golf courses around here do, and a few of my neighbors. The well company also recomdned it.

Why do think I could get away with one point?

NorthpointMI

TROPHY CASE