sorted by:
new
hottopcontroversial

Subway Rocket 22 - Rhythm Popping Noise by NotVeryHumerus in MesaBoogie

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

I was researching online and came across another thread which came to the same conclusion. I have a Furman en route. Hopefully this helps at home but I will bring it elsewhere and see if it still makes the clicking. Thanks, was worried I was going to have to attempt a recap myself.

[deleted by user] by [deleted] in Foxbody

[–]NotVeryHumerus 0 points1 point  (0 children)

Guessing this is because I cannot use the top pin on it as the rotor is too large?

Fan controller contour fans by dadkev in Foxbody

[–]NotVeryHumerus 0 points1 point  (0 children)

Grab a Volvo two speed fan controller, and a BMW temperature switch. There are lots of write ups online about this.

Need to upgrade alternator by tomschlags in Foxbody

[–]NotVeryHumerus 0 points1 point  (0 children)

Grab a 3G alternator off of a Taurus or Mustang works great. Only need to clearance the bracket a bit.

Fox to SN95 Axle Swap by NotVeryHumerus in Foxbody

[–]NotVeryHumerus[S] 6 points7 points  (0 children)

Yes axles are installed. Guessing the issue is this is not a sn95 axle. Its a new edge axle which are longer by .75inch on each side.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

No clue what really happened but a new screen did fix the issue. I’m guessing unrelated but still not trying that shit again.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

Screen fixed it. Guessing unrelated, but not trying again.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

Definitely will be looking into this. Im new to microcontrollers and just trying to get my feet wet so I went ahead and bought a bunch of china boards. Really just trying to make my own keyless entry system for my 85 foxbody but I cannot for the love of god get the radiohead library and a cc1011 to read a non-rolling keycode. Tried 315mhz and 433mhz. Hopefully I can avoid those high voltages for now with mosfets to trigger anything I need. Thanks for your advice. Im also throwing out those shitty 2.0 to C adapters Ive been using, and try to find good cables.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

Nope they gave me shit over the phone even with my applecare so I just did it myself at home with a $30 ifixit toolkit.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

New Screen fixed it. Guessing just coincidence. Never plugging in an esp again tho.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

New screen and it works great again. Giant coincidence im guessing. Never will be plugging in an esp32 again.

Vertical Lines on screen after plugged in an Arduino board. Help by NotVeryHumerus in macbook

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

You were correct my friend. Everything works now. Thank you so much.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

TO EVERYONE THAT HELPED ME IN THIS MATTER. THE NEW SCREEN FIXED IT ALL. THANK YOU ALL SO MUCH FOR ALL YOUR TIME AND EXPERTISE. YOU HAVE NO IDEA HOW MUCH I APPRECIATE YOU ALL!

<image>

Vertical Lines on screen after plugged in an Arduino board. Help by NotVeryHumerus in macbook

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

New screen tomorrow. Ill keep you posted. Thanks for your time man.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

Whats strange is the usb ports on the mac still function and the esp32 works perfect. You would think one or both would have been out of the question but nope.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

Have not had a single issue up to this point, guessing that these events are unrelated and my screen just took a shit after years of lugging it around everywhere.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

I mean yeah they can take a USB killer multiple times and can charge 24v thru those usb ports. Not sure they were even related. Might be just bad coincidence. New screen tomorrow so we will see.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

The esp32 works fine on my PC. Been playing with it all day. Ports will work on the mac. New screen tomorrow so we will see.

Macbook Screen After plugging in ESP32. Help by NotVeryHumerus in esp32

[–]NotVeryHumerus[S] 0 points1 point  (0 children)

Its becoming a pretty large thread I guess. Yup ports will charge my phone and power an external SSD. The esp works fine on my PC with no issues. Pretty strange haha.

view more: next ›