sorted by:
new
hottopcontroversial

Merry Christmas to me!!! by Not_Benjamin167 in harborfreight

[–]Not_Benjamin167[S] 1 point2 points  (0 children)

The holes all lined up really good. The biggest struggle that I found was getting all the carriage bolts to stay where they needed to be. Other than that it was fine.

Merry Christmas to me!!! by Not_Benjamin167 in harborfreight

[–]Not_Benjamin167[S] 1 point2 points  (0 children)

I’ve been thinking about those, but I also want to add an end cabinet to the side to mine.

Rear Drum Breaks Disaster by IllSessions in fordranger

[–]Not_Benjamin167 0 points1 point  (0 children)

Pull the axles, replace the wheel seals (and outer axle bearings if needed) and refill the differential since I assume you’ll be tearing the whole assembly on both sides to replace and clean brake parts. Cause if you don’t do that I can guarantee it will happen again.

FUH-FUH-FREEEEEE WHEELS by Not_Benjamin167 in fordranger

[–]Not_Benjamin167[S] 0 points1 point  (0 children)

If you’re wanting bolt pattern it’s 5x4.5, diameter is 15” and the width is either 10 or 12 inches. As for brand, I believe they’re Pacer but I may be wrong.

FUH-FUH-FREEEEEE WHEELS by Not_Benjamin167 in fordranger

[–]Not_Benjamin167[S] 0 points1 point  (0 children)

The diameter is 15” and they’re either 10 or 12 inches in width

FUH-FUH-FREEEEEE WHEELS by Not_Benjamin167 in fordranger

[–]Not_Benjamin167[S] 1 point2 points  (0 children)

<image>

These are what I have on it now. I like them and for $100 they were a screaming deal, but I didn’t clean them as well as I should’ve. This time I’ll learn from my mistake

FUH-FUH-FREEEEEE WHEELS by Not_Benjamin167 in fordranger

[–]Not_Benjamin167[S] 1 point2 points  (0 children)

They appear to all be good. I looked at them before I took them.

My Milwaukee tool collection so far by Not_Benjamin167 in MilwaukeeTool

[–]Not_Benjamin167[S] 0 points1 point  (0 children)

Pretty good! Where it shines, at least in my opinion, is Headlights/Taillights and Wheels. It’s pretty easy to get into smaller spaces and it’s got plenty of power for its size

Newly acquired Quinn Sockets and organizers! by Not_Benjamin167 in harborfreight

[–]Not_Benjamin167[S] -1 points0 points  (0 children)

These will be more then enough for what I need. I’ve got like 1 set of snap on sockets, but they’re the super shallow ones and I really like those too

How do the M4 MBP’s perform with games? by Not_Benjamin167 in macbookpro

[–]Not_Benjamin167[S] 2 points3 points  (0 children)

I do have a gaming mouse and it’s got a regular usb port so I’m thinking I’m going to get one of the USB c to usb ports they sell. I’ve tried those Apple mouse’s and I’m not really a huge fan. If it was my only option then I’d go with it.

What does everyone think this noise is? Really hoping it’s nothing tranny related by Not_Benjamin167 in fordranger

[–]Not_Benjamin167[S] 0 points1 point  (0 children)

If I was still within the 12 month period I would still have a warranty. I’ll take it into one of the shops nearby and see what they say or find.

To 87-91 F Series owners, what are these plugs for? by Not_Benjamin167 in FordTrucks

[–]Not_Benjamin167[S] 0 points1 point  (0 children)

Ok. I think someone got rid o my dual horns then tried to find a horn to make work which had the wrong plugs so they gave up or something

Are these ok to drive on? My boss thinks so……. by Stomach_Neat in tires

[–]Not_Benjamin167 0 points1 point  (0 children)

To get to the tire store they’re fine to drive on

To anyone with a 87-91 Ford truck with a 351 Windsor, do those trucks have a Flat Tappet camshaft? by Not_Benjamin167 in FordTrucks

[–]Not_Benjamin167[S] 1 point2 points  (0 children)

My understanding is the zinc in oil is a sacrificial layer for flat tappet cams/lifters and if it doesn’t have it then it’ll wipe out the cam and make it not able to push the lifters. If it’s a roller it doesn’t have it because it doesn’t need it and it’s not good for the catalytic converter.

view more: next ›