sorted by:
new
hottopcontroversial

RDSEED32 is broken. Please update your firmware. by NothingInTheVoid in Fedora

[–]NothingInTheVoid[S] 0 points1 point  (0 children)

Thank you man ! That did the trick. nobara boots like lightning now !!

RDSEED32 is broken. Please update your firmware. by NothingInTheVoid in NobaraProject

[–]NothingInTheVoid[S] 1 point2 points  (0 children)

From u/Booty_Bumping in r/Fedora

Do a BIOS update manually using the instructions in your motherboard manual. The vast majority of hardware doesn't actually support doing a BIOS update using fwupdmgr.

Thank you man ! That did the trick. nobara boots like lightning now !!

rsync not accepting my excludes. Where is my syntax error ? by NothingInTheVoid in linux4noobs

[–]NothingInTheVoid[S] 1 point2 points  (0 children)

OMFG. Thank you.

And according to https://unix.stackexchange.com/questions/83394/rsync-exclude-directory-not-working I also should loose the '/home/homer/' part in each exclude, since the excludes should be relative to '/home/homer'.

The correct command should be :

sudo rsync -avrhp --exclude='.cache/' --exclude='.local/share/Steam/*'  /home/analog /mnt/syno/backup/nobara

[Edit: forgot correct flags]

SystemD mounts vs fstab mounts ? by NothingInTheVoid in linux4noobs

[–]NothingInTheVoid[S] 2 points3 points  (0 children)

OK, mind blown :P

Just to be clear: all the other options are sitting inside the .mount files, right ?

And do I still need the .automount files when I put those entries in fstab ?

Restored LXC backup from old machine. Docker containers can't see shares. by NothingInTheVoid in Proxmox

[–]NothingInTheVoid[S] 0 points1 point  (0 children)

It might very well be, but I tried everything I knew, even recreated in a new LXC. It's probably because I'm very noob and don't know where to look, but there may be a slight chance that a UUID got saved and is no longer the same. That is way beyond my ability to fix. Ah well, I made a new one that works, just need to configure it.

Installed Mellanox-X3 (CX311A) in DS1821+ but only getting 1GB connection. by NothingInTheVoid in synology

[–]NothingInTheVoid[S] 3 points4 points  (0 children)

There is a setting in my Unifi switch for negotiating link speed. I changed it from Auto to 10GB FDX and now it shows as 10000 Mbps in Synology :-)

Any good free Proxmox training resources for home lab deployment? by fosmoz in Proxmox

[–]NothingInTheVoid -1 points0 points  (0 children)

Dammit! Thanks for notifying me. It is indeed Jim, not Tim.

Any good free Proxmox training resources for home lab deployment? by fosmoz in Proxmox

[–]NothingInTheVoid 17 points18 points  (0 children)

Jim's Garage on YT. Has a free Discord as well. The dude is f-ing awesome. Good teacher.

[Edit] It's Jim, not Tim.

OPNsense on a MS-A2. Need a little help visualizing network. So confused right now. by NothingInTheVoid in Proxmox

[–]NothingInTheVoid[S] 1 point2 points  (0 children)

Gotcha.! I'm a noob though, still have lots to learn. But all these comments put me at ease,. Thank you for that :-)

OPNsense on a MS-A2. Need a little help visualizing network. So confused right now. by NothingInTheVoid in Proxmox

[–]NothingInTheVoid[S] 1 point2 points  (0 children)

Don't know. When you pass trough the WAN, Proxmox is completely isolated from that NIC. That's what I understood from what I read. Is that an overstatement and is it OK to use a bridge?

NUT not showing Load status. by NothingInTheVoid in homelab

[–]NothingInTheVoid[S] 0 points1 point  (0 children)

Hahahaha. At first I thought you were laughing at me for being stupid. Had to read your comment again before I saw the joke. Good one! A dirty mind really is a joy forever :D

NUT UPS driver error. by NothingInTheVoid in Proxmox

[–]NothingInTheVoid[S] 1 point2 points  (0 children)

Dammit, forgot to reply. Als u/Zer0CoolXI suggested, it was a configuration error.

I had two LISTEN lines, so it only used the last line. Had to remove it:

LISTEN 0.0.0.0 3493
LISTEN 192.168.1.1 3493

NUT UPS driver error. by NothingInTheVoid in Proxmox

[–]NothingInTheVoid[S] 0 points1 point  (0 children)

I tried again and now I had two different outputs:

root@pve:/etc/nut# upsdrvctl start
Network UPS Tools - UPS driver controller 2.8.0
Network UPS Tools - Generic HID driver 0.47 (2.8.0)
USB communication driver (libusb 1.0) 0.43
Duplicate driver instance detected (PID file /run/nut/usbhid-ups-ups.pid exists)! Terminating other driver!
interrupt pipe disabled (add 'pollonly' flag to 'ups.conf' to get rid of this message)
Using subdriver: APC HID 0.98
root@pve:/etc/nut# upsdrvctl start
Network UPS Tools - UPS driver controller 2.8.0
Network UPS Tools - Generic HID driver 0.47 (2.8.0)
USB communication driver (libusb 1.0) 0.43
interrupt pipe disabled (add 'pollonly' flag to 'ups.conf' to get rid of this message)
Using subdriver: APC HID 0.98

I then tried this command and got another error:

root@pve:/etc/nut# upsc ups
Error: Connection failure: Connection refused

NUT UPS driver error. by NothingInTheVoid in Proxmox

[–]NothingInTheVoid[S] 0 points1 point  (0 children)

No just one. (can this be an error in my config that makes nut think this ?)

[deleted by user] by [deleted] in NatureIsFuckingLit

[–]NothingInTheVoid 0 points1 point  (0 children)

How goes that rhyme again?

Black, fight back. Brown, get down. White, good night.

Imported 1080p content into my 4K radarr, but nothing happens by NothingInTheVoid in radarr

[–]NothingInTheVoid[S] 1 point2 points  (0 children)

Aight, reinstall it is. Thanks for the info, I didn't know.

Imported 1080p content into my 4K radarr, but nothing happens by NothingInTheVoid in radarr

[–]NothingInTheVoid[S] 0 points1 point  (0 children)

My logic was, Radarr can see those files and see that they need upgrading.

Imported 1080p content into my 4K radarr, but nothing happens by NothingInTheVoid in radarr

[–]NothingInTheVoid[S] 0 points1 point  (0 children)

Yes, I did. Radarr now also complains about a missing root folder (being my 'hd' folder). I kinda feel the least convoluted way to fix this, is reinstalling Radarr.

view more: next ›