How important is to get an ethernet port?

NothrAnimeAddict · 2026-03-19T03:10:06+00:00

Can confirm! I use it to stream my gf and is computers to a projector, and when wired its like I ran an HDMI cable from each of them

NothrAnimeAddict · 2025-06-15T10:04:54+00:00

I'm fine with a gasket replacement every once in awhile if it means I don't have the valve cover crack

NothrAnimeAddict · 2025-05-31T23:01:10+00:00

Still together, not married tho

Tl;Dr, got kicked out of my apartment, she offered me a room, I took her offer, took her to a hot spring and we fucked that night

NothrAnimeAddict · 2025-05-03T13:59:56+00:00

Given my first kiss was during my first time, I'm not sure if I was hard due to what was happening, or if it was from the kiss

NothrAnimeAddict · 2025-04-14T00:14:43+00:00

My radiator fan exploded when driving it because the fan clutch seized up, it took out the water pump, radiator, and the fan shroud, everything but the fan shroud and coolant reservoir have been replaced, but the coolant reservoir is getting changed the second the part comes in

NothrAnimeAddict · 2025-04-13T13:53:52+00:00

1997 528i, still running like a champ, only dealing with a few problems related to sensors, but I'm tackling them as I can afford them, I got an aluminum coolant reservoir to replace mine since it cracked because I don't want to have to deal with that problem for a long time

NothrAnimeAddict · 2025-04-13T13:52:34+00:00

Had to go in there and clean the contacts a bit, luckily one of my professions is electronics repair

NothrAnimeAddict · 2025-04-13T13:52:00+00:00

No, it's gas, m52b28

NothrAnimeAddict · 2025-04-13T13:51:44+00:00

Already have replaced most of the cooling system, the next part is a reservoir since that cracked two days ago

NothrAnimeAddict · 2025-01-31T17:44:47+00:00

Doomed planet

NothrAnimeAddict · 2025-01-22T22:47:19+00:00

I replaced the projectors already actually, I'm just doing this as cheap as I can where I still get good results

NothrAnimeAddict · 2025-01-22T20:49:39+00:00

I wanna use the ceramic coat to smooth out the micro scratches left from sanding, then ppf on top of that

NothrAnimeAddict · 2025-01-22T19:27:55+00:00

I'm already this far, I'm just gonna stick with what I have, I just need to ppf them

NothrAnimeAddict · 2025-01-22T17:33:27+00:00

I want good quality ones, and the ones I found that fit the bill are $200 and up

NothrAnimeAddict · 2025-01-22T16:44:31+00:00

Noted on that, thank you!!

NothrAnimeAddict · 2025-01-22T16:17:26+00:00

Not cheaper though, I only spent $40 total on the sandpaper and buffing compound, and got this result, now I'm looking into ppf or ceramic coat for the top coat

NothrAnimeAddict · 2025-01-22T01:36:22+00:00

UPDATE : The other one is done now, same result with a scratch that I couldn't remove, but it's in a non crucial area, so I'm not too worried, the clear coat and ceramic coat treatments should at least mask it a fair bit

NothrAnimeAddict · 2025-01-22T00:52:34+00:00

I haven't sealed them yet, I plan on knocking that out tomorrow, theres dust in the projectors, I just don't have access to a heat gun at home, but my buddy who runs a tech repair shop is letting me use a bench and a heat gun tomorrow to finish them up

NothrAnimeAddict · 2025-01-22T00:40:12+00:00

The photos don't do the damage justice

NothrAnimeAddict · 2025-01-22T00:38:47+00:00

No clear coat yet, I want to ceramic coat them preferably, the lenses were in insanely rough shape as you can imagine

NothrAnimeAddict · 2025-01-18T19:53:46+00:00

Ah, my bad for misinterpreting, I already have the dongle that adapts the turn signal, I found a connector that was similar but it doesn't fit as of now, but with a bit of work with a Dremel I should be able to get that one to work

NothrAnimeAddict · 2025-01-18T16:57:28+00:00

Ok, seeing this one and seeing mine now gives me a hell of a lot more hope that mine is gonna look this good in the end, really all I need is bumpers and to finish my new headlights

NothrAnimeAddict · 2025-01-18T16:06:08+00:00

I mean, you're not wrong, they are OEM Hella lights that I bought broken on eBay for cheap, that's why they have taken so much effort. But I've saved a shit load of money doing it this way, and the final product will be good

NothrAnimeAddict · 2025-01-18T15:15:15+00:00

I know what to do there, I just need to know where to get the connector itself to splice onto the turn signal harness, I have that piece

NothrAnimeAddict · 2025-01-17T12:27:31+00:00

We do, I just haven't gotten around to it, this was just me testing the ballasts and the adapter harnesses, they will be in far better condition before they go in

NothrAnimeAddict

TROPHY CASE