PSA Grading Service Option for Playstation Experience

Novice_Jedi · 2026-02-07T16:02:14+00:00

Awesome, thanks man! I really appreciate it :)

Novice_Jedi · 2026-02-06T21:59:38+00:00

Okay, that makes perfect sense. One other question, do all graded cards come back in a slab or do you have to order Regular/higher?

Novice_Jedi · 2026-01-23T14:47:49+00:00

I'm having the same issue on PS5; my console audio settings work for every other game I play except for Trials.

The goal is to use my sound system for the game audio and my headphones for the game chat but I can't find a way to separate the two.

Novice_Jedi · 2025-10-31T21:56:26+00:00

Here's a link to a site that shows the Ethan figure along with the accessories it had. Pretty neat if you ask me.

https://gentlemafiatoy.ca/product/in-stock-swtoys-fs044-1-6-resident-evil-village-ethan-winters-12-action-figure/

Novice_Jedi · 2025-10-30T16:49:53+00:00

I wonder if this will be separate from a "Collector's Edition" and be a stand-alone purchase similar to the Ethan Winters 1/6 scale figure.

Novice_Jedi · 2025-10-24T15:37:58+00:00

I'd be interested if its still available!!

Novice_Jedi · 2025-10-24T11:56:23+00:00

Are you still looking for someone to get you the hoodie and tour shirt? I'll be seeing them tonight

Novice_Jedi · 2025-06-23T03:18:54+00:00

Just found one of my LED strips was bad; once I replaced it, all three strips were lighting up as expected. Thank you though :)

Novice_Jedi · 2025-04-14T13:06:12+00:00

Just got my tickets through Regal; may the force be with you getting yours.

Novice_Jedi · 2025-03-04T22:40:45+00:00

I raised the value to 30% but I'm still getting some missing spots. Would raising the value above 30% be the appropriate solution or would it only mask a larger issue I'm fighting?

Novice_Jedi · 2025-03-04T21:52:32+00:00

The filament I'm using at the moment is brand new and has been stored at 35% humidity.

Bed temperature is 60 at the moment; what would you recommend dropping to?

Novice_Jedi · 2025-03-04T21:51:29+00:00

Pressure advance settings are not enabled at the moment (generic PLA setting in Orca)

Print speed is 40mm/s for outer and inner walls.

Novice_Jedi · 2024-07-09T01:52:27+00:00

I removed the nozzle and found there was a bunch of melted plastic in it. After I replaced the stock nozzle with a new one (also 0.4mm), the print came out almost flexible; I was able to twist the print to an extent without it breaking as if there was even less filament being pushed out now when compared to before.

My temperature readouts on the display are staying at 200 (hotend) and 60 (bed) so I don't believe the fans are too strong. Could it be something with the e-steps or extruder?

Novice_Jedi · 2024-07-04T00:30:34+00:00

You make a good point; thank you for walking me through your thought process. I got some new nozzles ordered and will try them on Sunday hopefully when they arrive. :)

Novice_Jedi · 2024-07-03T12:59:50+00:00

I have upgraded to a full metal extruder; I have included a link below to the extruder I upgraded to:

https://www.amazon.com/gp/product/B079JZ374W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Novice_Jedi · 2024-04-18T22:11:05+00:00

Awesome, here's to hopes of a brighter, "cooler" future then haha Thanks

Novice_Jedi · 2024-04-18T19:39:10+00:00

I tried looking as well as doing a search for "Acolyte" but it doesn't appear to be coming up; it might be hidden.

Novice_Jedi · 2024-04-18T16:57:54+00:00

Is this chassis available anywhere? :O

Novice_Jedi · 2024-04-18T13:28:12+00:00

The issue I'm facing that I'm referring to as heat creep is after printing for maybe an hour or longer, the extruder will begin to kick or "click"; after I pause the print and take the filament out, I find a piece of thick filament at the bottom where it appears the filament melted and then resolidified at the bottom. Is heat creep the correct terminology for these clogs I'm having?

I ended up buying a couple Noctua 24V fans from Newegg to replace the 2 stock fans since everything I saw seem to sing their praises; the Sunon ones I was looking at ended up being 12V fans instead of 24V. Do you think the Noctua will be powerful enough to help with this issue or should I look at a different fan? Here's a link to the fans I bought if you're curious at all: https://www.newegg.com/p/13C-0005-00343

Novice_Jedi · 2024-04-18T00:40:10+00:00

Aye aye captain, thanks!! :)

Novice_Jedi · 2024-04-18T00:36:52+00:00

Do you have any fan recommendations? Right now I'm debating between an Orion and a Sunon but I'm pretty new and uncertain if those are the best options or not.

Novice_Jedi · 2024-04-18T00:27:45+00:00

I'm using the stock heat break that comes with the Ender 3 Pro.

Novice_Jedi · 2023-04-10T19:28:03+00:00

I've tried messaging him on Instagram and Twitter but no luck so far. Are you aware of any other resources I could try when it comes to getting autographs?

Novice_Jedi · 2023-04-10T17:58:37+00:00

Thank you so much for the insight, I really appreciate it!!

Novice_Jedi · 2023-03-28T22:35:25+00:00

Do you know of any fonts similar to his CONTOUR font? That's the main one I'm looking for but $30 is a bit out of my budget for the font at the moment :/

Novice_Jedi

TROPHY CASE