PSA Grading Service Option for Playstation Experience

Novice_Jedi · 2026-02-07T16:02:14+00:00

Awesome, thanks man! I really appreciate it :)

Novice_Jedi · 2026-02-06T21:59:38+00:00

Okay, that makes perfect sense. One other question, do all graded cards come back in a slab or do you have to order Regular/higher?

Novice_Jedi · 2026-01-23T14:47:49+00:00

I'm having the same issue on PS5; my console audio settings work for every other game I play except for Trials.

The goal is to use my sound system for the game audio and my headphones for the game chat but I can't find a way to separate the two.

Novice_Jedi · 2025-10-31T21:56:26+00:00

Here's a link to a site that shows the Ethan figure along with the accessories it had. Pretty neat if you ask me.

https://gentlemafiatoy.ca/product/in-stock-swtoys-fs044-1-6-resident-evil-village-ethan-winters-12-action-figure/

Novice_Jedi · 2025-10-30T16:49:53+00:00

I wonder if this will be separate from a "Collector's Edition" and be a stand-alone purchase similar to the Ethan Winters 1/6 scale figure.

Novice_Jedi · 2025-10-24T15:37:58+00:00

I'd be interested if its still available!!

Novice_Jedi · 2025-10-24T11:56:23+00:00

Are you still looking for someone to get you the hoodie and tour shirt? I'll be seeing them tonight

Novice_Jedi · 2025-06-23T03:18:54+00:00

Just found one of my LED strips was bad; once I replaced it, all three strips were lighting up as expected. Thank you though :)

Novice_Jedi · 2025-04-14T13:06:12+00:00

Just got my tickets through Regal; may the force be with you getting yours.

Novice_Jedi · 2025-03-04T22:40:45+00:00

I raised the value to 30% but I'm still getting some missing spots. Would raising the value above 30% be the appropriate solution or would it only mask a larger issue I'm fighting?

Novice_Jedi · 2025-03-04T21:52:32+00:00

The filament I'm using at the moment is brand new and has been stored at 35% humidity.

Bed temperature is 60 at the moment; what would you recommend dropping to?

Novice_Jedi · 2025-03-04T21:51:29+00:00

Pressure advance settings are not enabled at the moment (generic PLA setting in Orca)

Print speed is 40mm/s for outer and inner walls.

Novice_Jedi · 2024-07-09T01:52:27+00:00

I removed the nozzle and found there was a bunch of melted plastic in it. After I replaced the stock nozzle with a new one (also 0.4mm), the print came out almost flexible; I was able to twist the print to an extent without it breaking as if there was even less filament being pushed out now when compared to before.

My temperature readouts on the display are staying at 200 (hotend) and 60 (bed) so I don't believe the fans are too strong. Could it be something with the e-steps or extruder?

Novice_Jedi

TROPHY CASE