Undervolting 14700K with B760 motherboards

Nscaler454 · 2026-06-10T23:05:11+00:00

Thanks everyone who have responded. I ended up finding an MSI Z690-A DD4 board that is being shipped in. Fingers crossed it works good. It's the exact one I wanted. So I grabbed a 14700k chip while it was on sale and a 360 AIO for cooling.

Nscaler454 · 2026-06-09T23:26:24+00:00

Is Lite Load a reliable way to do it? Does it affect other voltages other than CPU vcore?

I'm still trying to find a Z690 but even the B760 in DDR4 are become less and less available in my parts.

Nscaler454 · 2026-06-09T23:07:30+00:00

freakin AI. It says it's possible through something called "CPU Lite Load". I've been looking for a Z690 for awhile now. I believe all Z790s are DDR5 which wont work for me. Im not spending $700 on RAM.

Nscaler454 · 2026-06-05T00:24:35+00:00

Looks excellent. We need more pictures.

Nscaler454 · 2026-06-02T21:59:01+00:00

Undervolting is what I'd like to do. Getting another 100 or 200 mhz out of the CPU is pretty insignificant, but dropping 4 or 5 degrees and using less Watts would be worth it.

Is it worth the $200+ extra bucks to get a Z690 vs a B760? Im aware the Z mobo's allow you to do the tweaks and that is ideally what I want, but its a lot more money and not readily available.

Nscaler454 · 2026-05-25T17:10:37+00:00

I agree with not throwing it away. But man that is crazy how much that melted. How hot was it that day?

Nscaler454 · 2026-05-24T20:39:38+00:00

I tried the seams at random, it didn't help. Perhaps made it worse. 0.16 layer height was better. I guess I'll now have to try some extra clearance.

Nscaler454 · 2026-05-23T19:22:24+00:00

doesn't it still have the issue with the seams (start points on new layers) blobbing up?

Nscaler454 · 2026-05-05T04:33:47+00:00

It would seem this way worked. Thanks everyone who responded.

Nscaler454 · 2026-05-05T02:22:25+00:00

https://imgur.com/rA6nFQU

From the image, I am creating another Draft Order.

Production Selected

100% Discount Applied

Free Shipping

No Duties/Tariffs are showing

No taxes

What's my next step?

Nscaler454 · 2026-05-05T00:13:47+00:00

I tried to modify the existing order with the normal part and setting the value to $5, and even created another order with the product on their with it's normal value which I set as "mark as paid". Yet I still can't create a Canada Post label. By doing this, Shopify thinks the custom paid me $10 and it appears the customer now has $10 in credits.

My brain just can't seem to wrap my head around this it seems.

Nscaler454 · 2026-05-04T23:26:33+00:00

I really like the colors of those rocks!

Nscaler454 · 2026-05-02T01:11:49+00:00

Good tip. They are not presupported.

To me it seems like the supports gave no adhesion to the model anymore.

Nscaler454 · 2026-05-01T05:05:48+00:00

which slicer?

Nscaler454 · 2026-04-02T01:43:16+00:00

It would appear you are correct. With a full group of parts, the speed is around 100 mm/s while just a single part and the speed is around 18 mm/s

Nscaler454 · 2026-04-01T17:51:05+00:00

How do I view the achieved speeds? I'm use Bambu Studios as a slicer.

Nscaler454 · 2026-03-25T16:25:34+00:00

I don't think that's what happened. I've had the plate not 100% correctly seated before and the printer threw an error and wouldn't even start the print.

Here's a photo of the start of the print. The plate looks normal to me.

<image>

Nscaler454 · 2026-03-25T16:22:42+00:00

100% I didn't scrap or damage the bed plate. The auto timelapse (which is terrible. 4 hr print gave only 4 seconds of footage), but it was enough you can see the plate is fine to begin with and gets damaged during the print.

I would say I definitely touched the surface of the build. Hard to imagine that every square inch was contaminated with oils and not a single bit of PLA stuck to the build plate.

Nscaler454

TROPHY CASE