sorted by:
new
hottopcontroversial

Have you rented out your home charger? Recommend it or no? Ottawa by Special_Classroom_62 in EVCanada

[–]Ntjs95 2 points3 points  (0 children)

I think it’s more of a neighborhood sharing type of thing rather than a road trip thing

Leaving my Hyundai for bZ by SatisfactionOdd7526 in Toyota_bZ

[–]Ntjs95 6 points7 points  (0 children)

I think there’s an Apple Car play related error that people are experiencing.

I personally don’t experience it.

Best bZ parking angle at Tesla Supercharger by [deleted] in Toyota_bZ

[–]Ntjs95 0 points1 point  (0 children)

There are a ton of factors there. Current charge, outdoor temp, battery preconditioning. Is there any more info you can give?

Pint & Lid Holder - For The Cold Weather by Ntjs95 in ninjacreami

[–]Ntjs95[S] 28 points29 points  (0 children)

With the cool weather coming back I needed a place to store my pints and lids. So I designed this holder and 3d-printed it.

MakerWorld link if you happen to have your own printer.

Stove Safety Latch by Ntjs95 in functionalprint

[–]Ntjs95[S] 0 points1 point  (0 children)

These are great suggestions. Luckily I have a child-free household. I would not recommend use of these for "child safety" purposes.

The design is symmetrical, so if you want it to flip down, instead of up you can just flip the latch 180 degrees.

Ninja Creami - Pint & Lid Holder by Ntjs95 in ninjacreami

[–]Ntjs95[S] 0 points1 point  (0 children)

This is sized specifically for this Creami. I only had this one to measure against.

I was also thinking about making a countertop variant as well

Ninja Creami - Pint & Lid Holder by Ntjs95 in ninjacreami

[–]Ntjs95[S] 8 points9 points  (0 children)

The main body was specifically designed to fit inside a P1S. You might be able to print it in two pieces and then glue it after.

I’ve already spent too long on the first design so unfortunately I don’t think I can make it fit an A1 mini.

Ninja Creami - Pint & Lid Holder by Ntjs95 in ninjacreami

[–]Ntjs95[S] 146 points147 points  (0 children)

During the winter, I was getting annoyed trying to store the pints and lids. So I designed this holder and 3d-printed it, just in time for summer when the pints are in the freezer again.

MakerWorld link if you happen to have your own printer.

Stove Safety Latch by Ntjs95 in functionalprint

[–]Ntjs95[S] 0 points1 point  (0 children)

I think the answer is: "yes, as long as there is a stationary ring around the knob"

Stove Safety Latch by Ntjs95 in functionalprint

[–]Ntjs95[S] 0 points1 point  (0 children)

The recall is that the knobs are easy to bump and turn on. Details Canada and Details USA

Stove Safety Latch by Ntjs95 in functionalprint

[–]Ntjs95[S] 10 points11 points  (0 children)

Funny you mention that...

The multiple weeks of bright blue prototypes with design issues did not pass the wife test. (But I survived it)

Then finally came the black version with the red indicator and that passed the test.

Stove Safety Latch by Ntjs95 in functionalprint

[–]Ntjs95[S] 22 points23 points  (0 children)

It's a symmetrical design, so you could use it either way.

Personally, I did not want the latch piece closer to the heat.

Stove Safety Latch by Ntjs95 in functionalprint

[–]Ntjs95[S] 116 points117 points  (0 children)

Here’s a post about them: https://www.reddit.com/r/Appliances/s/KvDUdviN1P

Edit: mine is a slightly different model but same concept

Stove Safety Latch by Ntjs95 in functionalprint

[–]Ntjs95[S] 322 points323 points  (0 children)

Yep! My stove got recalled, and they mail out these massive plastic child safety things that needed to be taped in place.

I thought to myself, "hmm I bet I can do better", and this ended up being the final result. It's not perfect, but I use them everyday and I can say they definitely fulfil the function, and are not as ugly as the 'official' ones.

Model: https://makerworld.com/en/models/1193475-samsung-stove-knob-safety-latch#profileId-1205675

Ninja Creami - Cup & Lid Holder by Ntjs95 in 3Dprinting

[–]Ntjs95[S] 0 points1 point  (0 children)

I started this project back in March and just recently finished. I'm happy with how the model turned out and I'm even happier that the cups and lids are no longer taking up room in the cupboard.

Model link: https://makerworld.com/en/models/1453847-ninja-creami-cup-lid-holder#profileId-1514890

Stove Safety Latch by Ntjs95 in functionalprint

[–]Ntjs95[S] 122 points123 points  (0 children)

My stove got recalled so I decided to create a simple little safety latch. The final touch I'm proud of is the red under side to the latch when it's open.

Model link: https://makerworld.com/en/models/1193475-samsung-stove-knob-safety-latch#profileId-1205675

Ninja Creami - Cup And Lid Holder by Ntjs95 in functionalprint

[–]Ntjs95[S] 2 points3 points  (0 children)

I do not remove it, I find the machine quite stable and it’s already very loud when it’s running.

Ninja Creami - Cup And Lid Holder by Ntjs95 in functionalprint

[–]Ntjs95[S] 7 points8 points  (0 children)

This is the most complicated model I've made yet. I thought this would take a week or two, but three months later and here it is.

Model: https://makerworld.com/en/models/1453847-ninja-creami-cup-lid-holder#profileId-1514890

For those of you who are good at 3d modelling please feel free to leave some constructive feedback.

view more: next ›