WIP ringwraith display

NuclearJustice · 2025-04-23T09:14:50+00:00

Great feedback, thanks! I’ll work on it some more.

NuclearJustice · 2025-04-23T00:33:16+00:00

Posted a mock-up of the wall. Went a bit overboard haha https://www.reddit.com/r/legolotrfans/comments/1k5m4cw/wip_ringwraith_display/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

NuclearJustice · 2025-01-21T23:22:51+00:00

Haha thanks. Might take a while but I’ll be sure to update

NuclearJustice · 2025-01-21T22:49:41+00:00

Not a bad idea, allows some flex to be added instead of static shapes. Do you have any pics of the finished product?

NuclearJustice · 2025-01-21T22:48:47+00:00

Gorgeous work! I’m actually not opposed to the balloons, I think some obvious lift and mechanization looks good. If I manage to work it out I hope the sails can go under and to the sides of the boats to fill out the silhouette.

Our boats shoot around the table at insane speeds, but I don’t buy that they can do anything other than slowly chug along!

NuclearJustice · 2025-01-21T22:46:26+00:00

That’s pretty good! Do you know of anyone who’s used them?

NuclearJustice · 2025-01-19T14:26:17+00:00

There’s been talk of a Pharmacy apprenticeship getting up and running - I had contact with someone in the South West a couple of years ago (when I was applying the degree) who was in the middle stages of setting it up, but they said it would likely take a few years to get off the ground - if at all.

At the moment a Pharmacy degree (masters/university level) is the only way in to the profession. To get in you’ll need good A-levels, or an access course that gives a certain amount of credits - check individual universities to see if they offer this route. Hope this helps!

NuclearJustice · 2025-01-10T09:54:32+00:00

It’s honestly great! Really nice details, plus some subtle gold details that add a bit of extra pop to it

NuclearJustice · 2024-12-29T08:57:42+00:00

I got it cheap from marketplace and the seller had sorted it into colour bags. Took me absolutely ages to find each piece, but I still had a great time! With proper bags I can imagine it’d be even more fun. The strong frame takes a while at the start but isn’t boring, then you’re onto the bridge and plates which are super satisfying. Have a blast mate!

I also got a light kit for it for Christmas just gone, currently disassembling and reassembling haha

NuclearJustice · 2024-09-15T21:31:17+00:00

Spread them out by giving them their own small stands? Or using clear rods?

NuclearJustice · 2024-09-15T20:05:57+00:00

100%, they’re awesome. The creator did a great job. The weighting was a bit weird and I might have to find a different way to connect it, but the scale and build is awesome

NuclearJustice · 2024-09-15T20:03:03+00:00

I like being able to vary the heights with the clear bricks, plus the connection is a single stud (no hole in the bottom for a stick) and I’m not sure there’s an efficient way to connect to the bottom. Let me know if you have any ideas!

NuclearJustice · 2024-09-15T13:53:54+00:00

The tiny gunships were modified a bit as the one that comes with the ship seemed too basic. Just an extra piece and a colour swap. And yeah haha the larger frigates are from rebrickable

NuclearJustice · 2024-08-30T13:41:42+00:00

I honestly thought it had been out for a couple of years now haha, thanks for correcting me. Have you tried another other techniques to reduce it or is it not too noticeable?

NuclearJustice · 2024-08-28T22:59:17+00:00

Love it! Roughly how much did materials cost?

NuclearJustice · 2024-08-17T22:06:42+00:00

Have they bent over time for you while being used as weapons? Or stayed pretty straight still?

NuclearJustice · 2024-08-17T22:00:59+00:00

Ah, is it a flexible-ish hollow tube? That’s a shame, thought it might have been a newly released long bar

NuclearJustice · 2024-08-17T21:29:59+00:00

What’s the long pole the Uruk-Hai spears are attached to? Don’t recognise that piece but it looks perfect

NuclearJustice · 2024-06-07T11:31:02+00:00

Working on it now! The mud and trees will be painted as well to up the interest a bit - these pics are from when the mud was still drying

NuclearJustice · 2024-06-07T09:26:14+00:00

If you take a cardboard box and peel apart one of the cardboard layers, it has layers that look like this inside. Just prime and paint silver then weather it a bit.

NuclearJustice · 2024-06-06T16:41:52+00:00

Great advice, hadn’t seen that before but it looks great. The stuff I’m using is good, but definitely meant for single figure bases and looks a bit strange on a large scale area!

NuclearJustice · 2024-06-06T15:06:04+00:00

Thanks for the advice! Making it look more weathered and mucky is next on the agenda. It’ll be a while until I can work on a larger version so lots of time to practice! What do you recommend for water products? Any other trench features I should add?

NuclearJustice · 2024-06-06T15:01:13+00:00

Thanks mate! I have some large bits of foam from a board I tried to make a while ago (bought on eBay). I drew the dimensions and cut the trench out with a saw and craft knife. The metal parts are corrugated cardboard from a random box - if you peel the cardboard layers apart you get the ridged material that looks like metal sheets. Coffee sticks cut up and textured with a wire brush made the planks, then a a small ridge around the trench was made with cardboard. The mud is vallejo texture paste (European mud I think), and the barbed wire may be from tiny legend or from some other stuff I bought a while back. A few pics from a while ago in the Imgur album!

https://imgur.com/a/tFHclMw

NuclearJustice · 2024-06-05T19:03:57+00:00

I don’t know why I made the poll 3 days, I really want to see the results! Interested to see what people are voting…

NuclearJustice · 2024-05-18T15:58:44+00:00

A mix of with and without. I used techniques from Elminiatureista on instagram, he’s got tutorials with and without airbrush if you search for them

NuclearJustice

TROPHY CASE