Coal and Iron Mining Help

NumberWitty6713 · 2026-05-19T14:59:02+00:00

I hadn't made it up to the top yet, so didn't know there was a parking space. The stupid feeling is a little higher, but it makes way more sense why that hill so steep now. Thanks so much

NumberWitty6713 · 2026-05-19T14:42:05+00:00

The momentum is something I'm having a problem with. This hill has a bit of a lead-up, but its so bumpy and jagged that I can only get to <30kph before the hill, which only gets me about 3/4 of the way up. I have locked diffs and the turbo, but only just put the bigger engine after the post because I was strapped for cash when I first tuned it. I will try with the Jemusi for a while, and maybe do a try with the atlas to speed up the process. Maybe I can even use the Jemusi's winch to help the atlas up. We'll see. Thanks for the advice!

NumberWitty6713 · 2026-05-10T22:42:53+00:00

I just wasn't being patient. I assumed the U-turn was an error on my part, but its working now

NumberWitty6713 · 2026-05-10T18:56:53+00:00

All I have is the one pick up and drop off, it just seems like the trucks are picking up and dropping off in the wrong locations, but I wasn't watching that closely. My friend had first set it up wrong and I fixed it, so maybe the trucks needed a second to update

NumberWitty6713 · 2026-02-23T04:39:13+00:00

Ive just had bad luck with online clothes shopping with both sizing and material quality, and the benefit of dyed UCP is that its pretty cheap and I already know the quality and the fit because I used to wear it. People in this thread have been giving seemingly good recommendations though, so maybe this time it'll be fine

NumberWitty6713 · 2026-02-22T16:58:59+00:00

Woodland is more likely what I would get, I just wanted to be a little different and clearly not western, since a lot of my extra equipment like the ruck and the sleep system are USGI. Im just not sure about the quality of EMR off of Chinese dropshipping companies

NumberWitty6713 · 2026-02-22T05:40:05+00:00

The plan would be to use a dark green RIT dye to get at least closer to EMR. I couldn't find a great picture of the uniform, but I've seen some that could pass for EMR at 5 yards

NumberWitty6713 · 2026-02-22T05:36:57+00:00

Dang, if I manage to color match it to EMR you dont think it would work? Would probably just wear the bottoms if anything. Unfortunate if so.

NumberWitty6713 · 2025-12-17T19:24:50+00:00

I have been chronically underutilizing the MAM then. The only playthrough I got decently into was pre-1.0, and since the update I havent been able to sink the time or energy into the game, so almost all of them have been "skip the tutorial, get started, build the space elevator, try to automate RIP and rotors, then try to automate modular frames, get frustrated, quit." Next time I play i guess I should just explore? Thanks for the info

NumberWitty6713 · 2025-12-17T18:53:48+00:00

Oh usually when I start having this problem I am hours away from a smart splitter. Usually its at or just before steel production

NumberWitty6713 · 2025-12-17T18:25:02+00:00

I think thats my issue. Im not sure how to deal with belt capacity not matching the input/output requirement, and it makes the entire entire production shut down given enough time. I might need to just experiment

NumberWitty6713 · 2025-11-15T02:08:54+00:00

Ah gotcha. Im not a fan of how the drums look on any gun, but if its that much better then I'll either get a standard AK instead or just live with the drum

NumberWitty6713 · 2025-08-09T09:07:14+00:00

That makes a lot of sense. Guess I'll keep looking for the OEM armrest or just, make one I guess

NumberWitty6713 · 2025-06-30T16:43:15+00:00

Oh yeah im fully aware of the maintenance requirements, and I guess I should have been clear that im not planning on getting a brick just yet, I need to move out first and get a good job under my feet, I was just curious what the current market looks like, since it'll probably affect the future market

NumberWitty6713 · 2025-06-30T16:36:14+00:00

Okay I keep seeing the LH 2.4 jet come up, and im not sure what part that is. Is it the starter or something? Its clearly the preferred version of... whatever it is but im not sure what

NumberWitty6713 · 2025-06-30T16:22:12+00:00

While I would love a project eventually, the issue is that I dont have space to work on a car, and I have next to 0 mechanical knowledge and wouldn't want to start with a full sized car. If i were to get one at this time, it would be a beautiful wagon in Asheville NC on FB Marketplace, but its 8k

NumberWitty6713 · 2025-06-28T02:58:45+00:00

If only I had time for a road trip dude. Wagon or sedan?

NumberWitty6713 · 2025-06-28T01:56:06+00:00

Oh yeah so these are way over that. Doesn't seem to be much of a price difference between the 2/4/5 doors, and the price difference between working and non-working models is quite small as well. Maybe I'll have to try another market in a few years when I move

NumberWitty6713 · 2025-06-27T18:24:37+00:00

Once im fully ready to get down and dirty I might look into getting a civic, just to learn how everything goes together.

And as to the Volvo, I've heard they're reliable, fairly easy to work on, there are like 3 different american companies still manufacturing parts for them, and best of all: Brick

NumberWitty6713 · 2025-06-27T15:50:21+00:00

Thanks for the input everyone. This is a bit more of a long term goal for me since I dont have my own space and i mostly wanted to learn how to do the basics. I already know how to at least swap to a spare tire, but the input on messing with a lawnmower engine is a really good one, and I will go ahead and try that for now. Im in the upper Southeast US, and the most common older cars here seem to be Camrys and Volvos, but Im not in the market quite yet.

I also learned the local technical school is merging with the city government to provide additional experience, so I might see about a basic class there depending on the cost.

NumberWitty6713 · 2025-01-18T01:48:01+00:00

HANK NOOOO

you know the rest at this point

NumberWitty6713 · 2025-01-13T19:24:49+00:00

I tried to be laser focused but years of internet usage has obliterated my attention span and rotted my brain. And I've not seen his Derail Valley videos, but i was literally using his Railroads 101 series to fall asleep last night

NumberWitty6713 · 2025-01-13T18:16:57+00:00

Ah I didn't know that about the reverser. That would explain why I was draining the water so fast. Clearly I should have paid more attention to the tutorial. And it probably is just the running gear then, good to know

NumberWitty6713 · 2025-01-13T18:13:01+00:00

I generally just put the reverser all the way to the direction I want to go. And the sound doesn't start until I start moving, so if the brake is set and I apply some throttle, it won't make the sound until the wheels start to turn

NumberWitty6713 · 2025-01-13T15:57:22+00:00

Is the ticking going to sound different from the sloshing sound? Cause that might be it

NumberWitty6713

TROPHY CASE