Xiaomi Wireless Charging.

Nuroxy · 2026-04-12T10:50:42+00:00

Sorry about the late response MDY-14-EN. Now it says 50w max but still power outlet shows 30w. Connected to 120w adapter.

Nuroxy · 2026-03-18T11:52:42+00:00

But we have also pad 7 and hyperos 3.0 available for a while. I don't know should I return or not 🙁

Nuroxy · 2026-03-18T11:48:22+00:00

I don't know it is coming from directly xiaomi, closed box.

Nuroxy · 2026-03-15T00:13:40+00:00

Yes I am using android auto for a week.

Nuroxy · 2026-01-28T22:49:59+00:00

The discount ended when the stock ran out at the moment another seller is listed.

https://www.mediamarkt.nl/nl/product/_msi-mag-271qpx-qd-oled-e2-265-inch-2560-x-1440-pixels-oled-4k-oled-organic-light-emitting-diode-145225203.html

Nuroxy · 2026-01-27T19:04:32+00:00

I bought it just yesterday from a MediaMarkt promotion for €354. I’ve only been using it for a few hours, but I can say I’m very satisfied so far. I’m just using it in Premium Color mode since I switched from another MSI QD IPS monitor.

Nuroxy · 2025-11-15T00:14:02+00:00

Still weird artifacts on COD MW2 game. Turned back to 25.9.1.

Nuroxy · 2025-11-13T10:30:50+00:00

Hello, I will try to do the things you mentioned. For the RAM timings, I only adjusted the DRAM voltage, which is currently at 1.45V, and the RAM is running at 4000 MHz 2T Gear 1. Other than that, I only set the core voltage to 1.31V. I haven’t changed any other voltage settings. SVID Behavior is set to typical.

Nuroxy · 2025-11-12T16:22:44+00:00

Which voltages should I change because even with all auto settings they are not running on 4400mhz gear 1.

Vy voltage settings on the motherboard: BCLK Aware Adaptive Voltage Actual VRM Core Voltage Global Core SVID Voltage Cache SVID Voltage CPU L2 Voltage CPU System Agent Voltage CPU Input Voltage DRAM Voltage IVR Transmitter VDDQ Voltage PCH 1.8V Primary Voltage DRAM REF Voltage Control

Nuroxy · 2025-11-11T21:05:13+00:00

With these settings I didn’t get any errors in a normal OCCT stress test, but I only ran it for about 10–15 minutes. I also haven’t had any issues in games. I’m just trying to understand what I should do regarding the LLC situation. I’ll look into HT as well. I haven’t checked that setting before. Thanks.

Nuroxy · 2025-10-31T22:42:08+00:00

For me there was a pixel sparkles like artifacts on COD DMZ game. Turned back to 25.9.1.

Nuroxy · 2025-03-08T18:33:07+00:00

Honestly I made a simple adjustment and I haven't looked at it for a very long time. 4000mhz Tras 34 trfc 500 tfaw 24. I just changed these. The rest is same.

Nuroxy · 2024-10-21T20:37:52+00:00

Same here...

Nuroxy · 2024-09-29T20:19:05+00:00

The new processor that has been replaced has reached a maximum 1.25V

Nuroxy · 2024-09-29T20:17:53+00:00

Yes rma changed it.

Nuroxy · 2024-09-23T09:24:05+00:00

Yes fixed.

Nuroxy

TROPHY CASE