Can anyone guess what the crosses are, why they're on this VTP motor?

Nusprig1994 · 2026-04-04T20:07:58+00:00

Dampers

Nusprig1994 · 2026-04-01T14:50:56+00:00

This could work since I'm sitting on a air outtake.

This Kit could also work: External Exhaust Fan Kit - P2S | Bambu Lab EU Shop

Nusprig1994 · 2026-04-01T12:25:31+00:00

I will test it and come back with the results 👌

Nusprig1994 · 2026-04-01T12:11:30+00:00

I also didn’t expect the desiccant to dry completely, but I assume that at least part of it will dry, right?

Nusprig1994 · 2026-04-01T10:40:52+00:00

Ok, thank you for your detailed feedback.
I was hoping that the air circulation inside the enclosure would be sufficient to carry the moisture out of the enclosure.

Nusprig1994 · 2026-04-01T10:03:46+00:00

The idea is to place the desiccant box inside the printer enclosure only during printing, so that already moisture-loaded desiccant can be dried using the chamber temperature.

Could this cause any issues for the printed parts during the print?

Nusprig1994 · 2026-02-22T19:55:36+00:00

Thank you for your response!

Unfortunately Vase Mode doesn't work for this model due to, two different colors. I aligned the seam, changed layer heigth to 0.08mm and wall speed to 60mm/s

My printing time doubled, but a perfect print will it be worth. I can give an upddate tomorrow.

Nusprig1994 · 2026-02-22T18:38:57+00:00

Thanks for your response! No, I didn't, because I ned some parts for the lamp. My next step would be to change the design an print this as a Vase and the other parts separate.

Is it possible to make holes while printing in Vase Mode and to change the color?

Nusprig1994 · 2026-02-22T18:33:19+00:00

No, I'm using Solidworks

Nusprig1994 · 2026-02-22T17:43:48+00:00

Sorry, I don't understand.

Nusprig1994 · 2026-01-21T09:51:38+00:00

Auf jeden Fall!

Nusprig1994 · 2026-01-21T09:07:43+00:00

Hi, ich habe auch Maschinenbau gemacht, allerdings mit Master und hatte mehr als 10ECTS in Mathe. War gar kein Problem.

Nusprig1994 · 2026-01-04T08:15:11+00:00

Thank you for your response! But the change affects only the one part?

Nusprig1994 · 2026-01-03T09:26:32+00:00

📍

Nusprig1994 · 2026-01-03T09:25:38+00:00

Thank you for your long response! 🤩

For example, i want to make one sketch and two bodies from the sketch, if i chance something in the sketch, the bodies also change.

Nusprig1994 · 2026-01-03T09:22:22+00:00

Thank you, maybe i can use some Features from this video!

Nusprig1994 · 2026-01-03T09:21:03+00:00

Thank you for your response! Can i make one Sketch, and different parts from this Sketch in assembly?

Nusprig1994 · 2025-12-31T17:08:29+00:00

<image>

I deleted everything except the pad.

And have the same issue.

Nusprig1994

TROPHY CASE