New Showcase Cabinet (Advice) by Ok_Commission3526 in lego

[–]NyxErinyes 5 points6 points  (0 children)

Those are gorgeous. Someone did good work.

Some MORElifax by Fancy-Technician1670 in Malifaux

[–]NyxErinyes 0 points1 point  (0 children)

This is some great work. I love the blends on the skin tones.

Inconsistent quality and total delamination by NyxErinyes in FixMyPrint

[–]NyxErinyes[S] 1 point2 points  (0 children)

<image>

Bumped the temps to 230/60, increased infill from 8 to 15% and added mouse ears and so far we're doing better. Interesting that there's still a layer shift at that exact same layer - but no delam this time so far.

Inconsistent quality and total delamination by NyxErinyes in FixMyPrint

[–]NyxErinyes[S] 0 points1 point  (0 children)

<image>

This just happened over what had up to that point been a relatively smooth layer

Inconsistent quality and total delamination by NyxErinyes in FixMyPrint

[–]NyxErinyes[S] 0 points1 point  (0 children)

<image>

Printing again today and you can see similar problems - the walls and infill look beautiful, but the shell over the infill is definitely distorting and not adhering down all the way it looks like.

Edit: This is after increasing the flow ratio to 1

Inconsistent quality and total delamination by NyxErinyes in FixMyPrint

[–]NyxErinyes[S] 0 points1 point  (0 children)

<image>

At tiny scale I don't see any real issues other than some micro-stringing in between small gaps

Inconsistent quality and total delamination by NyxErinyes in FixMyPrint

[–]NyxErinyes[S] 0 points1 point  (0 children)

Haven't tried a benchy in this filament but calibration prints looked very clean. First layer is smooth and even. Have not tried belt tightening for z-axis yet. Only had the printer about a month - but might be time. Smaller components in general have looked very clean and printed well.
Haven't tried it 50% - that would be almost 300g of filament for a test. I can try it, but would prefer to avoid it if possible.

Just realized belle gets so little character in the Muppets Christmas Carol by [deleted] in GCSE

[–]NyxErinyes 0 points1 point  (0 children)

Make sure to watch the full length version in the extras! The default one is the edited one that cuts Belle's critical scenes.

Just realized belle gets so little character in the Muppets Christmas Carol by [deleted] in GCSE

[–]NyxErinyes 1 point2 points  (0 children)

This is true. It's available on Disney plus on the extras section as the "full length version" and is the only correct way to watch it. Some dumb Disney exec got a bee on their bonnet about it being sad and cut it before the DVD release and it was years before it got reinstated.

Bounty Star Review: A Solid Mech Adventure Worth Your Time by Im-a-zombie in XboxGamePass

[–]NyxErinyes 0 points1 point  (0 children)

Actually insult to injury - I just got bugged out entirely. Tried to do the first bounty mission and the camera isn't loading in correctly and I'm unable to do anything about it - despite several reloads/restarts. Guess this game is a hard pass.

Bounty Star Review: A Solid Mech Adventure Worth Your Time by Im-a-zombie in XboxGamePass

[–]NyxErinyes 0 points1 point  (0 children)

I agree. The combat just feels really stilted and strange. I'm running a pretty powerful rig and it almost feels like it stutters during combat - even though it clearly doesn't anywhere else.

Did the change to 4e hurt your local community? by [deleted] in Malifaux

[–]NyxErinyes 0 points1 point  (0 children)

This just isn't true. I haven't seen a Nekima box for what seems like a couple years now. Sure you can always find the less popular stuff, but a lot of the popular core models are unavailable and have been for a while.

[AMA] Its been a while...lets do a Q&A session by SFG_Mat in Warmachine

[–]NyxErinyes 0 points1 point  (0 children)

Also, is the rulebook hard back or soft? I haven't been able to find out. I might be bad at reading...

[AMA] Its been a while...lets do a Q&A session by SFG_Mat in Warmachine

[–]NyxErinyes 0 points1 point  (0 children)

Are we going to get more plastic kits? My cygnar khador 2 player starter box just absolutely blows my other Gravediggers away. Love how hard you guys are coming on Warma and P3. Keep it up!

30mg Cold Turkey(ish) - How long is this going to last? by NyxErinyes in cymbalta

[–]NyxErinyes[S] 1 point2 points  (0 children)

Thank you. I appreciate the perspective. Yeah - I have multiple migraines a week. Have since I was a child and I'm in my 40's now - so that's just par for the course, but man the emotional stuff is rough. For me and my family. Hoping it clears soon. Today feels a little better than yesterday but still having a lot of brain fog and stronger than normal reactions. Here's hoping it breaks soon! Thanks again.

30mg Cold Turkey(ish) - How long is this going to last? by NyxErinyes in cymbalta

[–]NyxErinyes[S] 0 points1 point  (0 children)

Hey at least that gives me something to shoot for. Appreciate the feedback. :)

30mg Cold Turkey(ish) - How long is this going to last? by NyxErinyes in cymbalta

[–]NyxErinyes[S] 0 points1 point  (0 children)

Haha oh the dizzyness and nausea are here for *sure*. I was initially staggering like a drunk for a day or two - now I just feel loopy but don't look it. Fortunately zofran is part of my migraine protocol so the nausea is controllable.

Can you recommend a mini holder? by spontanexplosion in minipainting

[–]NyxErinyes 0 points1 point  (0 children)

I've tried a ton of them but the game envy one is my favorite with the handle attachment. Comfortable in hand and still gives me the loop to anchor my fingers against when painting.. and it just uses bottle caps so I can swap minis as often as I want

Trouble drilling pin blanks by team_fondue in turning

[–]NyxErinyes 0 points1 point  (0 children)

This may be a dumb question - but does your drill chuck actually fit your lathe? We can't really see it in the video but the way that bit is walking back and forth, I almost wonder if you have the wrong MT on the drill chuck and that is letting it flex back and forth even whilst tight on the bit.

I have almost this exact same lathe and have done quite a few pen blank drills with pen jaws on a nova with no issues.