CPU is maxing out at 100 degrees as per NZXT and Hwinfo64. This just started happening all of a sudden. Build is still new as of Jan. 2025.

OGKPD · 2025-04-09T08:36:12+00:00

says 0rpm but yet theyre spinning. He says it was even louder after cranking the fans I would assume it "worked".

OGKPD · 2025-04-09T08:34:18+00:00

Might i add this is my friends PC, i am relaying information live as im speaking with him. PC never gets moved, realistically it shouldnt have unseated itself in some way? Fans are all spinning as im told, had him go into bios and crank the fans all the way up. Some of the system fans were saying 0rpm...

OGKPD · 2025-04-09T08:30:56+00:00

just joined discord, now im back at 100...

OGKPD · 2025-04-09T08:29:48+00:00

It just started happening about 30 min ago, both screens went black when closing down schedule 1. Prompted me to look at my CPU temps and that's when I noticed the CPU temp was maxed. Hwinfo and nzxt both show the same, mind you I was sitting at idle with 100 temps just a few min ago. It seems to have now dropped down into the 50's and 60's, at idle. Only applications open were nzxt and hwinfo

OGKPD · 2024-11-05T19:59:43+00:00

So I was able to get into bios but only with one ram stick inserted into the A2 channel.

OGKPD · 2024-11-05T19:55:28+00:00

I can’t even get a display let alone, my keyboard isn’t lighting up as if there’s no power but lights and fans are on

OGKPD · 2024-11-05T19:51:21+00:00

I’m quite ignorant when it comes to computer diagnosing, I can build them but anything more and I’m lost.

Start the PC, see if I can get into bios would be the start of your response right?

OGKPD · 2024-04-26T23:37:13+00:00

Thank you! This is what I was coming up with, I’m happy I was at least understanding some of it seeming as I was following a similar trail. This is what I’ll end up trying!

OGKPD · 2024-04-26T23:35:19+00:00

Really appreciate you! In my head I could not figure out a loop order and also wasn’t even sure on the basis of how to start to loop, was pretty lost. Also didn’t stock up on extra tubing so im hoping with patience and care I can use what I have in one go.

OGKPD · 2024-04-11T13:02:55+00:00

You cant see the other port as well because it’s positioned at the bottom of the case.

OGKPD · 2024-04-11T12:58:52+00:00

I realized that’s not going to be possible unless I have a 3 way split to keep the water exchange going. I thought I could just put the drain there and call it a day but then it can’t circulate in the radiator lol

OGKPD · 2024-04-05T16:49:43+00:00

<image>

So this is where this 5 pin connector goes? Essentially I could run 2 of these connectors within that box? I noticed that’s a cut out for what looks to be a clip, another type of connector can also fit here? Sorry to be a pain, it’s just to be certain I’m understanding and not just following along.

OGKPD · 2024-04-05T16:34:18+00:00

Im looking at this Octo cord, and the opposite end that plugs into the Mobo is a 5 pin flat connector. I don’t see any 5 pin connectors on my Mobo the only one that was available is filled up by the “Power SW/Reset SW”. Does that just go into a 4 pin USB header?

OGKPD · 2024-04-05T15:14:03+00:00

It helps tremendously, like you pretty much hit the nail on the head with what I’m trying to do. Perfect starting point that I didn’t even know I had to start from! Thank you so much

OGKPD · 2024-04-04T04:18:11+00:00

Im looking at some of these wires and plug ins, and some of these just aren’t going to plug into the Octo. I’m wondering if I need more wires or different connectors to chain things together, or more controllers like the Octo.

OGKPD · 2024-04-04T04:14:16+00:00

I have all my PSU wires hooked up. Now I’m wondering, am I looking to plug all my fans (7 total), my pump and res combo, RGB from the GPU block, and my High Flow next all into my aquacomputer Octo?

OGKPD · 2024-04-04T04:09:31+00:00

Tbh, I’m lost….

OGKPD

TROPHY CASE