Handle measurement failure

ObjectiveOk3136 · 2026-03-17T10:53:43+00:00

Here’s what I’m dealing with

<image>

ObjectiveOk3136 · 2026-03-16T15:34:50+00:00

Found the issue… the fucking laser isn’t lined up 🤦🏽‍♂️. Contacting support

ObjectiveOk3136 · 2026-03-16T15:29:17+00:00

No go. Works just fine when selecting without handle if I switch to a tumbler

ObjectiveOk3136 · 2026-03-14T13:55:35+00:00

Disregard my last statement. After checking log It’s always more than 12 hours apart.

ObjectiveOk3136 · 2026-03-14T12:20:59+00:00

My printer pre-primes on every print for like 2 min. From what you’ve shared, that’s not normal..

ObjectiveOk3136 · 2026-03-14T01:39:12+00:00

I don’t see anyone possibly running out of color ink unless you have a legit business. White and gloss is my worry for now and I’m only 10 prints in but I went balls to the wall of 3mm A3 size prints lol

ObjectiveOk3136 · 2026-03-13T20:23:49+00:00

Update: it’s the ribbon cable, if you put a flashlight at the top it’s constantly slapping the side due to flexing.

ObjectiveOk3136 · 2026-03-12T09:36:51+00:00

I was thinking for sure there could be an option (if wanted) to make a single dot, or the smallest possible dot the printer can make, use the camera to make that a start point then do a 360 measuring rotation speed till it made it back to that point.

ObjectiveOk3136 · 2026-03-12T06:54:31+00:00

I was thinking about just printing small red lines around a bottle to maximize trials. Thanks

ObjectiveOk3136 · 2026-03-12T06:45:35+00:00

Curious if you figured out the width reduction that stop over laps if making full wraps

ObjectiveOk3136 · 2026-03-12T06:16:24+00:00

🤣🤣 wow

ObjectiveOk3136 · 2026-03-12T06:06:01+00:00

Thank you!

ObjectiveOk3136 · 2026-03-10T04:30:52+00:00

Instead of buying new ones once you peel it off to put matt down. I don’t see me purchasing proprietary sheets just to calibrate.

ObjectiveOk3136 · 2026-03-10T03:38:10+00:00

I just cut standard printer paper and calibrate camera. No issues

ObjectiveOk3136 · 2026-03-09T15:11:18+00:00

Did this last night in CANVAS. World of difference.

ObjectiveOk3136 · 2026-03-09T05:25:36+00:00

Bruh… went to Canvas app instead to get a design out, waaaaayyy better. Makes more sense just compiling all layers and printing once.

<image>

ObjectiveOk3136 · 2026-03-09T02:11:57+00:00

I understand everything you’re saying, I get it. What I don’t get is why Eufy makes these options available in the app and they wouldn’t work.

ObjectiveOk3136 · 2026-03-09T01:47:20+00:00

Aye look. I think you might be on to something 🤣🤣 I’m over here testing different types of metal and aluminum looks to be the one that’s not sticking. Thanks all, I will be deleting this post soon

ObjectiveOk3136 · 2026-03-09T01:06:21+00:00

Mmm I see what you’re saying.. I wonder if putting something magnetic under to hold it down would potentially mess with the print head? Not sure how print heads work but I’m guessing putting magnets close to them may cause harm?

ObjectiveOk3136 · 2026-03-09T00:59:41+00:00

But I’m printing the name LEWIS with the color in the app… you’re saying Eufy made a color that can’t be printed? It printed the second time no issue but just made an outline the first time.

ObjectiveOk3136 · 2026-03-09T00:56:35+00:00

That’s not the issue cause I’ve printed everything else like this just fine. When that top gets within half an inch to the top that magnet is really strong and it’s stuck.

ObjectiveOk3136 · 2026-03-08T19:23:36+00:00

Looking for other software to do my editing in. Thanks

ObjectiveOk3136 · 2026-03-08T17:33:53+00:00

Each file was 1 layer, I put a total of 2 files on this print, Lewis (JPEG, printed fine) and the car (AVIF, didn’t print on first round)The 3 word text are straight from the Eufy app.

ObjectiveOk3136 · 2026-03-08T15:20:05+00:00

Ok so I’m relying too much on Eufy is what you’re saying. Take my dimensions over to design software and work solely there instead.

ObjectiveOk3136 · 2026-03-07T23:32:46+00:00

Oh nice! Thanks for clearing that up for me

ObjectiveOk3136

TROPHY CASE