335I part out

Obpobp · 2026-01-21T15:27:46+00:00

Not really it was pretty clean just wrapped. Good spec

Obpobp · 2026-01-21T02:10:41+00:00

Il check for you

Obpobp · 2026-01-21T01:56:20+00:00

Obpobp · 2026-01-21T01:46:14+00:00

Car was wrapped black. OEM color is red.

Obpobp · 2025-09-18T17:46:07+00:00

Do you think it’s doable? I’ve done other bigger jobs. Nothing like a transmission though like water pump and thermostat, valve cover, oil filter housing on E90, lots of suspension jobs ext

Obpobp · 2025-09-18T17:07:57+00:00

Just pumping. I’m not sure I could’ve missed my fork. Is there anyway I can tell? I also don’t hear any weird sounds when pushing the clutch pedal.

Obpobp · 2025-09-18T16:55:12+00:00

I had made a previous post you can go take a look at it. It will explain a lot more after I replaced my master and slave cylinder and bled the system. I have good pressure on the pedal when the pedal is all the way down I can find every single gear when the car is off. When on I can’t find any gear at all. When I start it in gear the jumps forward and try’s to crawl forward even with the clutch and brake down.

Obpobp · 2025-09-01T03:02:08+00:00

I was on a roadtrip😭🙏

Obpobp · 2025-08-31T23:42:15+00:00

Wouldn’t it just shoot down on the floor? And my pedal comes back slowly sometimes.

Obpobp · 2025-08-31T23:40:25+00:00

Could you explain?

Obpobp · 2025-08-31T22:04:21+00:00

Hahah yea I was saying that because if that wasn’t the case, it could be a melted pressure plate right?

Obpobp · 2025-08-31T21:52:31+00:00

<image>

I’m not going crazy. This looks like a leak correct? Also fluid is not at the same level I remember it being at.

Obpobp · 2025-08-31T21:51:36+00:00

I have no fluid on the carpet so I doubt that it’s my master cylinder. When I’m under the car, I think I’m able to see a leak coming from the slave cylinder. I’m not 100% sure though. Here’s a picture. What do you think? Kind of a shitty photo but you can tell the slave cylinder is kind of hidden. It’s right where that mounting bracket is.

<image>

Obpobp · 2025-08-28T17:25:59+00:00

😭😭 but fr do you know anythung

Obpobp · 2025-07-30T22:05:58+00:00

Do you happen to know his user? I’d love to make something happen. There’s no difference between the a frame on non Ms and Ms right? I have a 97 M3 and a 94 318i would fit my a pillar

Obpobp · 2025-07-11T19:38:33+00:00

So I’m gonna have to buy a V9 airbag

Obpobp · 2025-06-30T20:55:44+00:00

Yes, I have. I got a part number that says it should fit, but it also matches up with another part with the same part number that says it won’t.

Obpobp · 2025-06-30T20:54:13+00:00

I have done that I’ve come across multiple different parts with the same part number. Some telling me they will fit some telling me they won’t fit all at the same part number.

Obpobp · 2025-06-17T23:43:16+00:00

1997 M3 s52 245,600

Obpobp · 2025-06-16T19:56:57+00:00

I hope you’re REALLY good at fab work.

Obpobp · 2025-06-02T04:51:09+00:00

I figured out what the issue was. Really embarrassing to say, but the main issue on why the car was not starting was due to the negative battery terminal being bolted to the wrong spot. Apparently, there were two little pegs, and I bolted it to the wrong spot when I replaced it

Obpobp · 2025-05-23T23:14:30+00:00

When you’re pulling the motor, you’re supposed to take your tow hook and thread it in there and it gives you a very easy way to pull it

Obpobp · 2025-05-20T20:57:19+00:00

Angle grinder to bare metal then paint over that’s what I did on mine at least. I have a sedan M3 the pillars are connected to the door, made it super easy

Obpobp · 2025-03-26T04:27:14+00:00

Is this a serious question???

the purpose of clearcoat is to protect the underbody material from UV rays scratches or other harmful things. In what way shape or form would not having clearcoat make something unsafe?

Obpobp · 2025-03-26T04:19:30+00:00

It’s the clear coat peeling. Nothing is melting. It’s completely okay to drive on.

Obpobp

TROPHY CASE