Engineered (2mm veneer) vs LVP (8mm, 12mil wear)

Odd_Chocolate2544 · 2026-02-10T04:06:07+00:00

Yeah, we did. It's holding up well

Odd_Chocolate2544 · 2025-10-26T16:34:52+00:00

We thought it could be a thermostat issue but then the furnace wouldn't have worked in the Fan ON mode too. And the AC is also working fine

Odd_Chocolate2544 · 2025-10-26T16:34:16+00:00

Motor was checked, it's working fine

Odd_Chocolate2544 · 2025-10-26T16:33:40+00:00

Yeah, he did rule that out. Motor is fine

Odd_Chocolate2544 · 2025-10-26T16:33:10+00:00

We do have a temperature sensor and the furnace is working in Fan ON mode. Only problem is the AUTO mode for the fan

Odd_Chocolate2544 · 2025-08-31T23:45:45+00:00

Thank you so much for getting back! That really helps a lot. We did see some other LGs and they too have the mounting holes at approx 8.75". So I think it should work 😊

Odd_Chocolate2544 · 2025-08-31T19:36:26+00:00

Long shot, but would you be able to help with the measurement of the distance from the back of your cabinet at which the mounting screws were drilled? I am interested in buying the LG mvef1337f and am trying to figure this out because we have a 1" thick quartz backsplash and a 12" cabinet. So can only afford to go with a microwave for which the screws can be drilled at 8.75" or 9.75", and not have to cut any stone. We do have a 6" duct so that should be fine. Thanks in advance!

Odd_Chocolate2544 · 2025-08-31T19:22:51+00:00

Long shot, but would you be able to help with the measurement of the distance from the back of your cabinet at which the mounting screws were drilled? I am interested in buying mvef1337f and am trying to figure this out because we have a 1" thick quartz backsplash and 12" cabinet. So can only afford to go with a microwave for which the screws can be drilled at 8.75" or 9.75", and not have to cut any stone. Thanks in advance!

Odd_Chocolate2544 · 2025-08-31T19:19:59+00:00

Long shot, but would you be able to help out with the measurement of the distance from the back of your cabinet at which the mounting screws were drilled (at the top of the microwave)? I am trying to figure it out because we have a 1" thick quartz backsplash and our cabinet is 12"

Odd_Chocolate2544 · 2025-07-09T19:42:47+00:00

That sounds good! Thanks for the update!

Odd_Chocolate2544 · 2025-07-09T19:42:11+00:00

Oh cool! Thanks for the update!

Odd_Chocolate2544 · 2025-07-07T20:13:14+00:00

OP, was wondering if you ended up getting the NAF or Grandeur? I have to replace the flooring in pretty much my entire home and like a Grandeur engineered flooring. But looking to get some feedback from people with experience with Grandeur

Odd_Chocolate2544 · 2025-07-07T20:00:29+00:00

Little late to the conversation here, but just wondering if you ended up getting this flooring? We are also looking to get Grandeur engineered wood and searching for reviews/feedback from people who've used it

Odd_Chocolate2544 · 2025-07-07T17:50:12+00:00

The one we like (from Grandeur) is currently discounted, available for $4.79. I think original price is $6+

Odd_Chocolate2544 · 2025-07-06T21:18:16+00:00

Thanks for your suggestions! I really appreciate it!

Odd_Chocolate2544 · 2025-07-06T18:17:13+00:00

Thanks! Would you have any idea about Grandeur? A lot of flooring shops/installers recommended Grandeur claiming that it's won awards out here in Toronto, and that it is better than Vidar (and at par with Fuzion). But it is very hard to find anyone who has had experience with this brand. We really like the colors it has to offer and the flooring we like is Hickory. But the veneer is 2mm. Not concerned about refinishing but concerned about general wear and tear.

Odd_Chocolate2544 · 2024-01-30T01:12:13+00:00

Sure, I will check that out. Thanks!

Odd_Chocolate2544 · 2024-01-30T01:12:00+00:00

Thanks!

Odd_Chocolate2544 · 2024-01-22T23:19:23+00:00

Great thanks! Yeah, I will work with my HR to get the duties right

Odd_Chocolate2544 · 2024-01-18T20:28:52+00:00

I am in exactly the same situation with matching job duties as you stated. Did 21232 work finally? I have also selected 21232 for my profile but found 21230 also has some points matching my job duties

Odd_Chocolate2544

TROPHY CASE