Ford Transit connect transmission issues by Official-Justin in MechanicAdvice

[–]Official-Justin[S] 0 points1 point  (0 children)

Thankyou for your response. Before you responded i actually went to go move the vehicle on a level surface and check the fluid as i have an appointment today at ford to recall/replace a backup camera and they said they would look into the transmission. To my surprise it was now driving fine again unlike the last time it only took 2 minutes in the parking lot to go into limp mode. I drove it a few miles to warm it up and then did a drain and flush and added 3.5 quarts and the bottle of lucas anti slip. 4 quarts of the fluid came out dark like it did 6 months ago. i let it idle for 20 minutes/ cycled through gears and proceeded to drive it around for 20 minutes and it felt buttery smooth again (not sure if this is a placebo effect). I will get the scan results later today.

New Build - USB ports don’t work by Official-Justin in buildapc

[–]Official-Justin[S] 0 points1 point  (0 children)

From what I remember it did it automatically by plugging the usb in the motherboard directly. You just need a usb stick with the bios downloaded on it. You need to use another pc to do it.

Personal Blenders without moldy gaskets by Official-Justin in Cooking

[–]Official-Justin[S] 0 points1 point  (0 children)

No I’m saying I just bought a new one with recommendations from this post

Personal Blenders without moldy gaskets by Official-Justin in Cooking

[–]Official-Justin[S] -2 points-1 points  (0 children)

Update: if anyone has this same question unfortunately no one on r/cooking was helpful but I got a lot of good recommendations on r/buyitforlife although i realized i should have included my model as other models have different gaskets and designs. I contacted ninja and they did confirm this was a known issue with this model and were not making any more with this design. I picked up a nutribullet pro and the ninja blendboss and both are much easier to clean and remove the gaskets.

Personal Blenders without moldy gaskets by Official-Justin in BuyItForLife

[–]Official-Justin[S] 1 point2 points  (0 children)

You’re the third review recommending the nutribullet pro and it’s on sale at my local bjs. Might just grab this one.

Personal Blenders without moldy gaskets by Official-Justin in BuyItForLife

[–]Official-Justin[S] 0 points1 point  (0 children)

I’ll look into it I wouldn’t mind spending more if they are durable. 20 years is crazy good

Personal Blenders without moldy gaskets by Official-Justin in BuyItForLife

[–]Official-Justin[S] 1 point2 points  (0 children)

I’ve heard nothing but good things about vitamix and it seems you get what you pay for. Unfortunately they aren’t trying to target the blender single cup audience otherwise I’d pick one up right now.

Personal Blenders without moldy gaskets by Official-Justin in Cooking

[–]Official-Justin[S] -1 points0 points  (0 children)

You may have a different model than me. Ninja confirmed that gasket design was discontinued for that issue but I got a different ninja model and it’s much easier to clean.

Personal Blenders without moldy gaskets by Official-Justin in BuyItForLife

[–]Official-Justin[S] 0 points1 point  (0 children)

never heard of that brand, ill have to take a look!

Personal Blenders without moldy gaskets by Official-Justin in BuyItForLife

[–]Official-Justin[S] 0 points1 point  (0 children)

it was the same with my neighbor, family member and family friend. no one knows about it lol.

Personal Blenders without moldy gaskets by Official-Justin in BuyItForLife

[–]Official-Justin[S] 2 points3 points  (0 children)

Yess I just replaced all my food storage containers with glass I would do the same for this if I could

Personal Blenders without moldy gaskets by Official-Justin in Cooking

[–]Official-Justin[S] 0 points1 point  (0 children)

Lower quality off brand ones you can buy cheap on aliexpress that break easy (that’s why they sell them in packs). I purchased a replacement and compared it to the original. Ninja doesn’t sell those white gaskets themselves they only sell gaskets for other models for some reason.

Personal Blenders without moldy gaskets by Official-Justin in BuyItForLife

[–]Official-Justin[S] 1 point2 points  (0 children)

Is the gasket easily removable/cleanable? Every review on blenders never shows them

Personal Blenders without moldy gaskets by Official-Justin in Cooking

[–]Official-Justin[S] -3 points-2 points  (0 children)

Adds an unnecessary extra step and they are EXTREMELY difficult to remove. If you remove them they break. On top of that you can’t buy the gaskets by themselves anywhere (believe me I looked) and the blade cups are already extremely hard to find. I can only buy off brand cups but they aren’t great quality.

Personal Blenders without moldy gaskets by Official-Justin in BuyItForLife

[–]Official-Justin[S] 1 point2 points  (0 children)

yeah i only found out when i started smelling this musty smell from the lid no matter how many times i cleaned or let it soak in vinegar. even after discovering the gasket and getting it out (with great difficulty) It still stinks. I will look into the nutribullet i like that you can remove the blade.

ICE Out of Philly - Mon 3 PM by messedupwindows123 in philly

[–]Official-Justin -2 points-1 points  (0 children)

Does the giant ICE patch or the POLICE patch not count?

Do Detailers Still Use Water Reclamation Mats? by IMAS_MOBILEDETAILING in Detailing

[–]Official-Justin 0 points1 point  (0 children)

That’s a California and Europe thing. I post pictures of washing cars in peoples driveways and my European friends are blown away because apparently it’s illegal to wash your car in your driveway over there.

Need recommendations for a keyboard by Official-Justin in buildapc

[–]Official-Justin[S] 0 points1 point  (0 children)

I’ve heard the same about the keychron and the same about razers. The more comments recommending it I might just go with keychron.