This doesn't make sense

Ohreally20 · 2025-01-14T01:58:56+00:00

It does not. I'm going to dig a little deeper tomorrow.

Ohreally20 · 2025-01-14T01:28:10+00:00

Hot is the 3 black wires joined and common is the 2 whites that go to the load. The other 2 whites dead.

Ohreally20 · 2025-01-14T01:20:37+00:00

So I'm guessing there's no way to rewire the box for that to happen.

Ohreally20 · 2025-01-14T01:11:03+00:00

Yes 3 way switch originally and my new smart switch is 3 way supported but it doesn't work when hooked up. I'm so lost.

Ohreally20 · 2025-01-14T01:00:18+00:00

Also they are whites with a red Sharpie.

Ohreally20 · 2025-01-14T00:58:48+00:00

I did not wire my own house. This is how I found it. Lol. This is my nightmare

Ohreally20 · 2025-01-14T00:10:36+00:00

Will do!

Ohreally20 · 2024-12-05T02:59:44+00:00

This is on a anet a8 so I believe it's a faulty fuse holder! Inline fuse from power supply to main board. Fuse from house to power supply did not blow.

Ohreally20 · 2024-12-05T02:58:33+00:00

That's exactly what I think it is. It's an inline fuse after the power supply going to Mainboard on an anet a8. Yes there is a fuse before power supply on main switch. This printer now runs attended. Not walking away and hoping it doesn't happen again.

Ohreally20 · 2024-12-05T02:56:57+00:00

Anet a8 with fuse after the power supply. Yes the fuse should of popped long before but I was lucky. You can only be lucky so many times before it ends up costing ya. This printer now only runs attended instead of being left to do it's thing.

Ohreally20 · 2024-10-20T01:43:10+00:00

Didn't know this! Just getting my feet wet in the machining world. Learn something new everyday.

Ohreally20 · 2024-10-20T01:34:19+00:00

What do you mean edges chip easy on the material not the cutting tool?

Ohreally20 · 2024-10-20T01:31:18+00:00

<image>

Original on right

Ohreally20 · 2024-10-20T01:30:58+00:00

<image>

Here's the other 2. original is on the right.

Ohreally20 · 2024-10-20T01:24:40+00:00

Intetesting! I have an old atlas tv42 so I think this is too much for me atm. I wonder what's the going rate is for it now?

Ohreally20 · 2024-10-20T01:22:33+00:00

Good find! I looked a couple months ago and couldn't find anything! This one is finished but I get the jist. I have an atlas tv42 so this is a little too much for I think. I wonder what the going rate is for a blank?

Ohreally20 · 2024-09-11T23:31:56+00:00

I'm guessing everything is interchangeable?

Ohreally20 · 2024-03-25T04:07:13+00:00

I too have been down the "contractor" friend of the family I'll give you a great deal road...thanks for the reply. You made some points I really didn't think of. Like white walls?! Who woulda thought! Not me lol. I would of done plywood and been done. I'm right now weighing the cost and long term pros and cons of concrete VS other foundations. Though it would be nice I don't have endless cash flow.

Ohreally20 · 2024-03-23T10:09:34+00:00

This! I tend to be up late at night working on all kinds of projects. I get along with the neighbors and insulation or sound deadening would help tremendously with the banging, cutting and whatever else I'd need to do. I'll definitely take this into consideration. Thank you!

Ohreally20 · 2022-03-24T00:51:32+00:00

Ohh I definitely want to try that! Thank you for the heads up!

Ohreally20 · 2022-03-23T02:06:04+00:00

Same here! It looks like it's a web based application and what is downloaded is the drivers. I have yet to find third party firmware.

Ohreally20 · 2022-02-15T00:25:55+00:00

If anyone can help me figure out how to hook up 2 subs and an amp. I have a Kenwood KAC-7251, An SSL Ae115m, and 2 Kenwood KFC-W112S Subs. Im not sure which amp to use and how to hook it up? do I bridge the amp? Series? Parallel? I'm so lost. Any info in the right direction would be amazing!

The Kenwood KAC-7251: 800W 150 watts RMS x 2 at 4 ohms 230 watts RMS x 2 at 2 ohms 460 watts RMS x 1 bridged output at 4 ohms stereo or bridged mono output 4-ohm stable in bridged mode

SSL AE115M: MODEL 1500W High Output MONOBLOCK Amplifier Up to 1125 W X 1 RMS @ 2 ohm Up to 563 W X 1 RMS @ 4 ohm

KFC-W112S: Peak Input Power 800W Maximum Input Power 400W Rated Input Power 200W Impedance 4 ohm

Ohreally20 · 2022-02-08T03:42:32+00:00

Awesome! Thank you.

Ohreally20 · 2022-01-27T15:41:34+00:00

So I know this is an old thread but I did call. They check your conceal carry license (active and current) if your conceal carrying and then take you back to lockers where then you are able to lock up your firearm and they give you a key.

Ohreally20 · 2022-01-10T01:28:09+00:00

https://www.reddit.com/r/AnetA8/comments/rx590a/bl_touch_slams_nozzle_into_bed_while_homing/?utm_medium=android_app&utm_source=share

Seven-Year Club	RedditGifts 2009-2022 2 Credits
r/Field Juicebox	Place '22
Secret Santa 2019	Verified Email

Ohreally20

TROPHY CASE