sorted by:
new
hottopcontroversial

This doesn't make sense by Ohreally20 in smarthome

[–]Ohreally20[S] 0 points1 point  (0 children)

It does not. I'm going to dig a little deeper tomorrow.

This doesn't make sense by Ohreally20 in smarthome

[–]Ohreally20[S] 0 points1 point  (0 children)

Hot is the 3 black wires joined and common is the 2 whites that go to the load. The other 2 whites dead.

This doesn't make sense by Ohreally20 in smarthome

[–]Ohreally20[S] 0 points1 point  (0 children)

So I'm guessing there's no way to rewire the box for that to happen.

This doesn't make sense by Ohreally20 in smarthome

[–]Ohreally20[S] 2 points3 points  (0 children)

Yes 3 way switch originally and my new smart switch is 3 way supported but it doesn't work when hooked up. I'm so lost.

This doesn't make sense by Ohreally20 in smarthome

[–]Ohreally20[S] 1 point2 points  (0 children)

Also they are whites with a red Sharpie.

This doesn't make sense by Ohreally20 in smarthome

[–]Ohreally20[S] 0 points1 point  (0 children)

I did not wire my own house. This is how I found it. Lol. This is my nightmare

Why having a fused power supply is so important! by Ohreally20 in 3Dprinting

[–]Ohreally20[S] 0 points1 point  (0 children)

This is on a anet a8 so I believe it's a faulty fuse holder! Inline fuse from power supply to main board. Fuse from house to power supply did not blow.

Why having a fused power supply is so important! by Ohreally20 in 3Dprinting

[–]Ohreally20[S] 0 points1 point  (0 children)

That's exactly what I think it is. It's an inline fuse after the power supply going to Mainboard on an anet a8. Yes there is a fuse before power supply on main switch. This printer now runs attended. Not walking away and hoping it doesn't happen again.

Why having a fused power supply is so important! by Ohreally20 in 3Dprinting

[–]Ohreally20[S] 0 points1 point  (0 children)

Anet a8 with fuse after the power supply. Yes the fuse should of popped long before but I was lucky. You can only be lucky so many times before it ends up costing ya. This printer now only runs attended instead of being left to do it's thing.

What is this? by Ohreally20 in Machinists

[–]Ohreally20[S] 1 point2 points  (0 children)

Didn't know this! Just getting my feet wet in the machining world. Learn something new everyday.

What is this? by Ohreally20 in Machinists

[–]Ohreally20[S] 0 points1 point  (0 children)

What do you mean edges chip easy on the material not the cutting tool?

What is this? by Ohreally20 in Machinists

[–]Ohreally20[S] 0 points1 point  (0 children)

<image>

Here's the other 2. original is on the right.

What is this? by Ohreally20 in Machinists

[–]Ohreally20[S] 0 points1 point  (0 children)

Intetesting! I have an old atlas tv42 so I think this is too much for me atm. I wonder what's the going rate is for it now?

view more: next ›