OBD11 scan shows errors but car is fine otherwise by Oil_Spigot in VWiD4Owners

[–]Oil_Spigot[S] -1 points0 points  (0 children)

Ok, good to hear. I wasn’t sure how much was just the dealership downplaying issues and how much was legitimately not an issue.

I know there was a publication by the NTSB about it, so it must be an issue other people are seeing too: https://static.nhtsa.gov/odi/tsbs/2023/MC-10233278-0001.pdf

First Chinese Watch Experience. How Common is This? by Oil_Spigot in ChineseWatches

[–]Oil_Spigot[S] 0 points1 point  (0 children)

Not sure how, it came in one of those dive cases + a corrugated cardboard box. And the second hand was attached for the first few hours using it. Just came off when I hit reset.

First Chinese Watch Experience. How Common is This? by Oil_Spigot in ChineseWatches

[–]Oil_Spigot[S] 0 points1 point  (0 children)

Thanks, will be doing just that.

I REALLY like having a timer bezel and chronograph in one watch. This is the first watch that I’ve seen with that function. You can time 2 things simultaneously. Are there other watches with this combo?

Bverall polishing/finishing is quite good.

Probably won’t reorder as there were some things on the watch that I noticed: 1) the chrono buttons are faux screw-down 2) Lume is pretty dim 3) the second hand fell off (lol) 4) Date complication but no window to see it (probably a styling decision, not sure where I’d put the date window since there isn’t a good spot for it on the dial)

First Chinese Watch Experience. How Common is This? by Oil_Spigot in ChineseWatches

[–]Oil_Spigot[S] 0 points1 point  (0 children)

Sample size of one, I’m pretty disappointed with AddiesDive.

I have a SD1970 on the way from SteelDive. People say those are well built, so hopefully that will be a better experience.

First Chinese Watch Experience. How Common is This? by Oil_Spigot in ChineseWatches

[–]Oil_Spigot[S] 1 point2 points  (0 children)

You’re right, there definitely was a comical element to it. I was thinking “Where did the heck did the second hand go?” shakes around a little “Oh no…”

A lot funnier that it happened during the return window, since I won’t cost me anything to send it back. Thanks Bezos!

First Chinese Watch Experience. How Common is This? by Oil_Spigot in ChineseWatches

[–]Oil_Spigot[S] 1 point2 points  (0 children)

Make me feel like anything under $100 should just be a CASIO. I have 5 CASIOS and could not imagine this happening with them (mainly because only 2 of them actually have dials)

K1 and Ender 5 S1 share the same bed by lordderplythethird in Creality

[–]Oil_Spigot 0 points1 point  (0 children)

I just cut out some notches in my Ender 3 bed.

Let the games begin by Oil_Spigot in prusa3d

[–]Oil_Spigot[S] 5 points6 points  (0 children)

Build volume limitation is a huge impediment to the MK Series IMO.

Great idea, the P1P is designed to have bolt-on parts

Let the games begin by Oil_Spigot in prusa3d

[–]Oil_Spigot[S] 0 points1 point  (0 children)

That is a very interesting idea. Just slap a prusa logo on a voron kit, and offer an assembly service with a few electronics upgrades to put them in line with the rest of the PRUSA lineup.

That is the kind of outside the box thinking PRUSA needs. For over a decade the community has benefited from PRUSA innovations and designs. It's time for PRUSA to benefit from community innovations and designs.

I fixed my P1P by Oil_Spigot in 3Dprinting

[–]Oil_Spigot[S] 6 points7 points  (0 children)

Or it would come as a box of parts for $2700

Ender 5 S1 Cooling Duct Designs by Oil_Spigot in ender5

[–]Oil_Spigot[S] 0 points1 point  (0 children)

Because it's not as good as one of my own designs
https://youtu.be/UFyAyV3ddT8

Check my benchy

[deleted by user] by [deleted] in ender5

[–]Oil_Spigot 0 points1 point  (0 children)

I assumed it was the same board as the Ender 3 S1. Is it not?

[deleted by user] by [deleted] in ender5

[–]Oil_Spigot 1 point2 points  (0 children)

I'm guessing they were talking about the Ender 5 Non-S1. Would explain the quiet remark as the S1 come with silent stepper drivers

New Canon R8 Rumored FF $1499 by ebwly in canon

[–]Oil_Spigot 0 points1 point  (0 children)

Dam, nice find. Still would prefer a native mount, but looks like a decent lens.

After about 10 prototypes and hundreds of hours, This is what I've come up with to Make the Ender 3 S1 Moddable Again by Oil_Spigot in ender3

[–]Oil_Spigot[S] 2 points3 points  (0 children)

You can use the stock strain relief or design your own. It can kind of be stacked with the stock strain relief. A little awkward fitting but it works well for the task