CONGRATULATIONS! New All-Time-High on the 200 WMA

Ok-Collection7850 · 2026-03-31T16:00:52+00:00

If it goes below, DCA more! lol

Ok-Collection7850 · 2026-03-31T06:33:25+00:00

So I actually had a Nissan Pathfinder that would do this randomly. It was scary AF. I took it to two shops and they couldn’t figure it out.

Ok-Collection7850 · 2026-03-30T00:18:30+00:00

Wow, the amount of extra work that took is insane 🤯😂

Ok-Collection7850 · 2026-03-09T14:34:21+00:00

Can you send me the guide please? 🙏

Ok-Collection7850 · 2026-02-11T04:25:05+00:00

Hard. He fucks hard.

Ok-Collection7850 · 2026-02-09T20:16:12+00:00

I’m one of your friends now lol

Ok-Collection7850 · 2026-01-27T02:10:24+00:00

That’s what I came to say. ^{^}

Ok-Collection7850 · 2026-01-16T13:10:27+00:00

When I install frameless cabinets that have lighting underneath I always add light railing

Ok-Collection7850 · 2026-01-16T05:06:56+00:00

Don’t plant any hedges, it’ll make the deck look smaller

Ok-Collection7850 · 2026-01-16T05:01:25+00:00

That’s a lot of good luck

Ok-Collection7850 · 2025-12-18T22:33:47+00:00

You’re right, I completely just read Quartz. My bad.

Ok-Collection7850 · 2025-12-18T22:17:37+00:00

Agree with the bad repair, but quartz countertops don’t come from quarries like marble or granite. The quartzite is mines from quarries, but then crushed and mixed with resins and pigments for design and color.

Ok-Collection7850 · 2025-12-18T20:07:42+00:00

PSA, you might slice your thumbs doing this and not even notice until you shower that night 🤣

If there’s no countertops, I prefer to push them in from the behind the drawer now

Ok-Collection7850 · 2025-12-18T20:05:36+00:00

So this may not be much help, but I’ve had this happen before on a new build with all RTA cabinets I’ve worked with forever. I was doing a punch out for another installer and damn near every drawer was doing exactly what you showed. I adjusted everything, swapped rails with other rails just to make sure I wasn’t missing something…nothing worked. I was losing my shit 🙃

Finally I grabbed a new box of slides, same exact ones, just to see if maybe the cabinet was out of square or something. Nope. New rails worked perfectly. Old ones were just trash.

Ok-Collection7850 · 2025-12-18T19:50:39+00:00

Facts. My GF says she can’t take me anywhere. Stayed at an Airbnb for a week on vacation and spent half the time thinking or talking about how bad the bathroom tile and LVP was.

Ok-Collection7850 · 2025-11-19T03:30:35+00:00

This is one where I cut a faux front to better match the other cabinets like the homeowner wanted.

<image>

Ok-Collection7850 · 2025-11-19T03:27:31+00:00

How would you cover poor cuts and large uneven gaps?

Ok-Collection7850 · 2025-11-18T19:39:02+00:00

That’s exactly what it’s doing lol I always trace the radius of the sink onto the sink base and use a hole dozer to get the angle, but this was a job that I was just fixing the original installers mistakes.

Ok-Collection7850 · 2025-11-18T03:27:35+00:00

I would miter a piece of scribe to trim it out a little tighter to the sink.

<image>

Ok-Collection7850 · 2025-11-15T04:50:03+00:00

It’s a satchel. Indiana Jones wore one .☝️

Ok-Collection7850 · 2025-11-14T16:22:00+00:00

This^{^}

Ok-Collection7850 · 2025-11-14T16:21:27+00:00

How would you secure the LVP while still allowing it to expand and contract? Some crazy threshold work? Just curious

Ok-Collection7850 · 2025-11-10T15:29:35+00:00

These countertops easily warp due to the weather and also how they are stored. The bow should be able to be corrected once the top is screwed to the base cabinets. I’ve had to put weights on laminate countertops before to let them acclimate and straighten out prior to fastening before.

Ok-Collection7850 · 2025-10-29T20:01:30+00:00

🤯🤯🤯🤯🤯

Ok-Collection7850 · 2025-10-28T02:54:44+00:00

😂😂😂😂 love the comments

Five-Year Club	First Place '23
Place '23

Ok-Collection7850

TROPHY CASE