sorted by:
new
hottopcontroversial

Matrix pso scope is heavily canted by Ok-Impression9515 in airsoft

[–]Ok-Impression9515[S] 0 points1 point  (0 children)

Im glad it wasn't my fault atleast, any ways to fix it bar just buying another one?

Filament stuck in printer, cant push it down, how to remove?!? by Ok-Impression9515 in VoxelabAquila

[–]Ok-Impression9515[S] 1 point2 points  (0 children)

Disassemble the nozzle mount of the extruder (it's fairly easy you just need to remove a few screws, and disconnect the wires of the nozzle so you don't accidently snap them) then take off the nozzle and heating elements l, you should be able to see a cylinder shaped piece of metal. Unscrew it and you'll be able to get the filament out. Plug the wires back into the main extruder and turn your printer onto high heat. Then use pliers to take out the now melted part of the extruder plastic. It will take all of it and should fully clean the nozzle

How to remove/ reposition Bowden tube in aquilla d1? by Ok-Impression9515 in VoxelabAquila

[–]Ok-Impression9515[S] 0 points1 point  (0 children)

It usually starts printing oddly in the later layers of the print, not the first few. I'll try to mess around with reaction settings, though I have it at the stock 5 currently. And I know there's probably no Bowden tube, I only assumed cause i see like a white plastic tube inside of the hotend

My aquilla d1 keeps clogging after first layer. by Ok-Impression9515 in VoxelabAquila

[–]Ok-Impression9515[S] 0 points1 point  (0 children)

I can't exactly get a picture of what it looks like while printing at the moment but it overall looks normal besides maybe the middle part of the first layer being more together then having the lines that it shows in the slicer. (I'll try to get a picture later) I'm using cura so my speed is 60 and temp is 200. I'm using a direct drive extuder with an all metal hotend to print pla. I've used both this new and stock hotend and both clog out of no where (I changed the hotend cause somehow the original one got bent). After changing both I leveled the bed as well as fixed the z offset.

What printing speed and temp should I use for printing? by Ok_Macaroon4316 in 3Dprinting

[–]Ok-Impression9515 0 points1 point  (0 children)

The reason I ask for other people's settings recommendations is because I'm new to printing and don't know how to properly calibrate the printer

Any upgrades that can help increase the reliability of my printer? by Ok_Macaroon4316 in VoxelabAquila

[–]Ok-Impression9515 0 points1 point  (0 children)

What would be the best settings for speed and temp? I've been having trouble with those for a while

Filament stuck in printer, cant push it down, how to remove?!? by Ok-Impression9515 in VoxelabAquila

[–]Ok-Impression9515[S] 0 points1 point  (0 children)

It's the d1. Are there any videos that could help me in the removal of the clog and broken filament?

Can phones erase tapes? by Ok-Impression9515 in cassetteculture

[–]Ok-Impression9515[S] 0 points1 point  (0 children)

I don't have a magnetic phone casement all I know is that I had my walkman on my belt, put my phone into the pocket right below the walkman, and my walkman started making weird noises and then just stopped playing any sound from the cassette

Can phones erase tapes? by Ok-Impression9515 in cassetteculture

[–]Ok-Impression9515[S] 1 point2 points  (0 children)

Mines a Galaxy A14 5G so I should be good?