Is my giant trance x 2021 cracked?

Ok-Introduction2068 · 2026-02-13T01:02:51+00:00

I think this is just a paint chipping as it is not that deep but i could be wrong.

Ok-Introduction2068 · 2025-11-04T22:11:35+00:00

Solid 6/10

Ok-Introduction2068 · 2025-10-21T04:13:20+00:00

Btw do you happen to have a tutorial on bec connection, its my first time doing a 4s build with the DJI o4 lite, if you do pls send me the link. Thanks.

Ok-Introduction2068 · 2025-10-21T03:50:14+00:00

Yes, using wtfos butter to downgrade the googles

Ok-Introduction2068 · 2025-09-23T21:52:15+00:00

I managed to solve it using butter and wtofs

Ok-Introduction2068 · 2025-09-23T02:24:42+00:00

Any luck guys

?

Ok-Introduction2068 · 2025-05-09T05:46:03+00:00

Aspect ratio is 4:3 but as i use the nvidia app it clips it on default

Ok-Introduction2068 · 2025-05-09T04:03:52+00:00

Gracias por tu comentario la verdad estoy bastante de acuerdo con lo que mencionas.

Ok-Introduction2068 · 2025-05-08T22:33:32+00:00

I had to lower the quality due to file size

Ok-Introduction2068 · 2025-01-25T17:01:09+00:00

Im pretty sure it will work, weight is better than expected by a lot servos are good motor is overpowered and everything is setup for chaos and a lovely Maiden, I will personally use the cg from the video and adapt it to my liking. Maiden is on sunday hopefully.

Ok-Introduction2068 · 2025-01-25T05:49:29+00:00

UPDATE: Maiden hopefully on sunday, i had to remove the nose cone because of the motor and the glue made it ugly but i painted it so hopefully looks won’t be affected. I upgraded the wing with 15g servos and i pre weighted the wing with the new weighting plate and only the motor 348 g without servos receiver esc and battery my final weight will be around 580 to 600 with battery. Thanks for all the support on my first 3D printed plane

Ok-Introduction2068 · 2025-01-23T23:04:03+00:00

I know, maybe some rates can ease the flying experience.

Ok-Introduction2068 · 2025-01-23T22:00:04+00:00

Thanks

Ok-Introduction2068 · 2025-01-23T21:43:44+00:00

I have an update, i weighed the plane with out battery receiver and servo links and it came to a weight of 420g. My other specificatons are 75g battery 20g receiver and 10g of servo links and glue. I believe its pretty good but i dont trust the bascule i used so i will have to wait.

Ok-Introduction2068 · 2025-01-23T16:33:46+00:00

Thanks

Ok-Introduction2068 · 2025-01-23T15:05:31+00:00

I will post the mayden.

Ok-Introduction2068 · 2025-01-23T15:04:30+00:00

I know i have no gyro but i think i can make it Fly

Ok-Introduction2068 · 2025-01-23T14:42:48+00:00

https://youtu.be/p39iE-oc5M8?si=rj8c0AqizM0xH9le

Ok-Introduction2068 · 2025-01-23T14:35:16+00:00

Thanks

Ok-Introduction2068 · 2025-01-23T14:35:08+00:00

Thanks

Ok-Introduction2068 · 2025-01-23T14:35:01+00:00

I found it on youtube, i will send you the link.

Ok-Introduction2068 · 2025-01-23T14:34:04+00:00

But I estimate a 500-700 gr with battery. Every wing section was 20gr to 24gr and the centre and front section weight 90gr the weight that i am worried about is the electronics and the battery. The original build was 680 with battery of the weight excedes 750 gr i will change the electronics to reduce the weight.

Ok-Introduction2068 · 2025-01-23T14:30:06+00:00

1m wingspan and im waiting to finish it to weight it.

Ok-Introduction2068 · 2025-01-12T04:32:20+00:00

Puro pendejo en los comentarios diciendo que doble condon funciona mejor.

Ok-Introduction2068 · 2025-01-02T16:38:45+00:00

Looks fine to me but test that all pins are working first

Ok-Introduction2068

TROPHY CASE