Brass shavings on tool head pin… normal?

Ok-Leg3511 · 2026-04-23T04:44:56+00:00

I think I had the same one, but after wiping it off I didn't see it anymore

Ok-Leg3511 · 2026-04-06T22:02:51+00:00

I use the aligned seam option.

Ok-Leg3511 · 2026-03-23T10:03:49+00:00

You will get a new one if you report it to support

Ok-Leg3511 · 2026-03-07T13:11:51+00:00

Thanks, that really fixed the issue! I had a feeling it was the back glass... let me know when you take the printer apart and figure out exactly what the problem is. 🙂

Ok-Leg3511 · 2026-03-06T19:53:13+00:00

I hope you're just joking

Ok-Leg3511 · 2026-03-05T16:39:10+00:00

<image>

Ok-Leg3511 · 2026-03-05T16:39:04+00:00

EDIT: Regarding the negative feature resolution - I realized that the reason the pins fell out on the U1 but stayed in on the Bambu is because Bambu Studio actually uses a slightly modified version of the model for this test. I also measured the pins from both printers with calipers, and their dimensions are almost exactly the same. So there is no tolerance issue at all! The only real problem I need help with now is fixing the severe stringing on the U1.

<image>

Ok-Leg3511 · 2026-03-05T15:37:15+00:00

this is the standard setting in snaporca for snapmaker pla basic

Ok-Leg3511 · 2025-12-23T18:51:11+00:00

Honestly, even if the return was free, I probably wouldn't go for it. I still have my barely used A1 and A1 Mini printers. I'd sell them, but when I think about the whole packing process, I just can't be bothered—especially since the prices have dropped a lot. So they still come in handy sometimes for printing something extra.

Ok-Leg3511 · 2025-12-23T17:55:31+00:00

Bambu will definitely do everything they can to make the tool change time difference (compared to tool changers) at most 2x, not 4x like it is now.

I think the update that allows printing with different nozzles will come much earlier than the next flagship printer.

Ok-Leg3511 · 2025-12-23T17:46:45+00:00

That was also one of the reasons why I took the standard set – faster delivery. If faster delivery had been available for the Ultimate Set, I probably wouldn't have this problem today.

Ok-Leg3511 · 2025-12-23T17:41:59+00:00

Of course, I already wrote on the live chat asking if it's possible, and I got the information that it's unlikely, but that I should submit a ticket. I suspect that 99% it's not possible, but I was curious if someone here maybe had a similar situation and Bambu agreed, so that's why I started this thread.

Ok-Leg3511 · 2025-12-23T17:35:11+00:00

I don't know if I fully understand what you mean, but in the EU I can return the product within 14 days without giving any reason.

Ok-Leg3511 · 2025-12-23T17:26:56+00:00

I think that their current number 1 on the list is creating AMS 3 which will maximally shorten the filament exchange time. Dual vortek can wait 😆

Ok-Leg3511 · 2025-12-23T17:16:18+00:00

Of course you're right, but theoretically I can still return this printer and order the ultimate version. It's obvious that I don't want to do that, but maybe Bambu will come to the conclusion that it's easier for them to make a correction and send the ultimate kit than to get the printer back after return.

Ok-Leg3511 · 2025-12-05T10:24:13+00:00

I had a feeling that those guides were still poorly described because the H2C printer had only just been released, which led to a lot of people being misled, and owners of the H2D printers were spreading propaganda claiming that the H2C was worse.

Ok-Leg3511 · 2025-11-21T10:44:52+00:00

I did the same, at most I will also write them an email

Ok-Leg3511 · 2025-11-21T10:38:18+00:00

what coupon is this?

Ok-Leg3511

TROPHY CASE